[U-Boot] [PATCH] video: meson: hdmi-supply regulator should be optional
Maxime Jourdan
mjourdan at baylibre.com
Tue Jun 4 20:26:19 UTC 2019
Some boards don't have such a regulator, and don't need one to enable
HDMI display. Make it optional, fixing hdmi display for those boards.
Also surround the regulator code with a config check on DM_REGULATOR.
Reported-by: Mohammad Rasim <mohammad.rasim96 at gmail.com>
Signed-off-by: Maxime Jourdan <mjourdan at baylibre.com>
---
drivers/video/meson/meson_dw_hdmi.c | 14 ++++++++++----
1 file changed, 10 insertions(+), 4 deletions(-)
diff --git a/drivers/video/meson/meson_dw_hdmi.c b/drivers/video/meson/meson_dw_hdmi.c
index 7a1c060856..483c93f6b6 100644
--- a/drivers/video/meson/meson_dw_hdmi.c
+++ b/drivers/video/meson/meson_dw_hdmi.c
@@ -361,13 +361,19 @@ static int meson_dw_hdmi_probe(struct udevice *dev)
priv->hdmi.i2c_clk_high = 0x67;
priv->hdmi.i2c_clk_low = 0x78;
+#if CONFIG_IS_ENABLED(DM_REGULATOR)
ret = device_get_supply_regulator(dev, "hdmi-supply", &supply);
- if (ret)
+ if (ret && ret != -ENOENT) {
+ pr_err("Failed to get HDMI regulator\n");
return ret;
+ }
- ret = regulator_set_enable(supply, true);
- if (ret)
- return ret;
+ if (!ret) {
+ ret = regulator_set_enable(supply, true);
+ if (ret)
+ return ret;
+ }
+#endif
ret = reset_get_bulk(dev, &resets);
if (ret)
--
2.21.0
More information about the U-Boot
mailing list