[U-Boot] [PATCH v3 00/18] Add EEPROM-based board detect support for TI K3 SoCs
Andreas Dannenberg
dannenberg at ti.com
Tue Jun 4 23:08:10 UTC 2019
This is an updated EEPROM-based board detection series that can applied
if staged with other patches in the sequence proposed earlier [1].
For completeness here is the proposed sequence again, avoiding merge
conflicts, but this time from the perspective of this patch series.
Step 1) Faiz' "Add Support for eMMC in Am65x-evm" series [2]. It needs
a small update to actuall allow for eMMC boot I posted earlier.
Step 2) The updated (v2) SYSFW loader series just posted [3]
Step 3) The updated AM654x EEPROM support proposed with this series
Step 4) An updated version of Lokesh's "arm: k3: Allow for exclusive
and shared device requests" series [4]. In addition to a rebase
such an updated series should include updating power domain
properties for devices that were added during the previous
steps.
Step 5) An updated version of Lokesh's "arm: k3: arm64: Initial support
Texas Instrument's J721E Platform" series [5] also adding
in the few lines of codes to leverage SYSFW.
Step 6 & beyond) Various rproc patches, etc.
Changes since v2:
- Re-based for proposed staging K3 AM654x patch staging sequence
Changes since initial submission:
- Re-based onto latest 'master' branch
- Collected all review tags
- Re-tested
[1] https://lists.denx.de/pipermail/u-boot/2019-June/371739.html
[2] https://patchwork.ozlabs.org/project/uboot/list/?series=111723
[3] https://patchwork.ozlabs.org/project/uboot/list/?series=111844
[4] https://patchwork.ozlabs.org/project/uboot/list/?series=109163
[5] https://patchwork.ozlabs.org/project/uboot/list/?series=109296
--
Andreas Dannenberg
Texas Instruments Inc
Andreas Dannenberg (16):
arm: dts: k3-am65: Move pinctrl nodes out of U-Boot specific dtsi
arm: dts: k3-am65: Add I2C nodes
arm: dts: k3-am654-base-board: Enable wkup_i2c0 across all boot stages
configs: am65x_evm_defconfig: Enable I2C support
configs: am65x_hs_evm_defconfig: Enable I2C support
arm64: dts: k3-am654-base-board: Add I2C GPIO expander @ 0x38
configs: am65x_evm_a53: Enable PCA953X-type GPIO driver
configs: am65x_hs_evm_a53: Enable PCA953X-type GPIO driver
configs: am65x_evm_a53: Increase malloc pool before relocation
configs: am65x_hs_evm_a53: Increase malloc pool before relocation
arm: K3: am654: Map common EEPROM data into SRAM scratch space
ti: common: am6: Add support for board description EEPROM
ti: common: am6: Add support for setting MAC addresses
board: ti: am654: Use EEPROM-based board detection
configs: am65x_evm: Add support for applying overlays
configs: am65x_hs_evm: Add support for applying overlays
Vignesh R (2):
i2c: omap24xx_i2c: Adapt driver to support K3 devices
arm: omap_i2c: Remove unwanted header file inclusion
arch/arm/dts/k3-am65-main.dtsi | 52 ++++
arch/arm/dts/k3-am65-mcu.dtsi | 11 +
arch/arm/dts/k3-am65-wakeup.dtsi | 19 ++
arch/arm/dts/k3-am65.dtsi | 7 +
arch/arm/dts/k3-am654-base-board-u-boot.dtsi | 27 +-
arch/arm/dts/k3-am654-base-board.dts | 22 ++
arch/arm/dts/k3-am654-r5-base-board.dts | 13 +
arch/arm/include/asm/omap_i2c.h | 2 -
arch/arm/mach-k3/am6_init.c | 4 +
arch/arm/mach-k3/include/mach/am6_hardware.h | 3 +
arch/arm/mach-k3/include/mach/sys_proto.h | 2 +
board/ti/am65x/Kconfig | 7 +
board/ti/am65x/evm.c | 241 ++++++++++++++++++
board/ti/common/board_detect.c | 246 +++++++++++++++++++
board/ti/common/board_detect.h | 206 ++++++++++++++++
configs/am65x_evm_a53_defconfig | 11 +-
configs/am65x_evm_r5_defconfig | 4 +
configs/am65x_hs_evm_a53_defconfig | 11 +-
configs/am65x_hs_evm_r5_defconfig | 4 +
drivers/i2c/Kconfig | 2 +-
include/configs/am65x_evm.h | 18 +-
21 files changed, 884 insertions(+), 28 deletions(-)
--
2.17.1
More information about the U-Boot
mailing list