[U-Boot] [PATCH v3 03/18] arm: dts: k3-am65: Move pinctrl nodes out of U-Boot specific dtsi
Andreas Dannenberg
dannenberg at ti.com
Tue Jun 4 23:08:13 UTC 2019
Only U-Boot specifc DT properties or overrides, must be in -u-boot.dtsi.
Pinctrl nodes does not belong here. Now that pinctrl nodes are in kernel
DT, there is no reason to be keep these in -u-boot.dtsi. Move them to
proper places so that it would ease copying DT entries from kernel DT.
Signed-off-by: Vignesh R <vigneshr at ti.com>
Reviewed-by: Lokesh Vutla <lokeshvutla at ti.com>
---
arch/arm/dts/k3-am65-main.dtsi | 8 ++++++++
arch/arm/dts/k3-am65-wakeup.dtsi | 8 ++++++++
arch/arm/dts/k3-am654-base-board-u-boot.dtsi | 15 ---------------
3 files changed, 16 insertions(+), 15 deletions(-)
diff --git a/arch/arm/dts/k3-am65-main.dtsi b/arch/arm/dts/k3-am65-main.dtsi
index 84fed12fbd..a97872f62e 100644
--- a/arch/arm/dts/k3-am65-main.dtsi
+++ b/arch/arm/dts/k3-am65-main.dtsi
@@ -78,6 +78,14 @@
pinctrl-single,function-mask = <0xffffffff>;
};
+ main_pmx1: pinmux at 11c2e8 {
+ compatible = "pinctrl-single";
+ reg = <0x0 0x11c2e8 0x0 0x24>;
+ #pinctrl-cells = <1>;
+ pinctrl-single,register-width = <32>;
+ pinctrl-single,function-mask = <0xffffffff>;
+ };
+
sdhci0: sdhci at 4f80000 {
compatible = "ti,am654-sdhci-5.1";
reg = <0x0 0x4f80000 0x0 0x260>, <0x0 0x4f90000 0x0 0x134>;
diff --git a/arch/arm/dts/k3-am65-wakeup.dtsi b/arch/arm/dts/k3-am65-wakeup.dtsi
index 1f591ef8bb..1b67747dfe 100644
--- a/arch/arm/dts/k3-am65-wakeup.dtsi
+++ b/arch/arm/dts/k3-am65-wakeup.dtsi
@@ -34,6 +34,14 @@
};
};
+ wkup_pmx0: pinmux at 4301c000 {
+ compatible = "pinctrl-single";
+ reg = <0x4301c000 0x118>;
+ #pinctrl-cells = <1>;
+ pinctrl-single,register-width = <32>;
+ pinctrl-single,function-mask = <0xffffffff>;
+ };
+
wkup_uart0: serial at 42300000 {
compatible = "ti,am654-uart";
reg = <0x42300000 0x100>;
diff --git a/arch/arm/dts/k3-am654-base-board-u-boot.dtsi b/arch/arm/dts/k3-am654-base-board-u-boot.dtsi
index c43888f36d..67535f76a5 100644
--- a/arch/arm/dts/k3-am654-base-board-u-boot.dtsi
+++ b/arch/arm/dts/k3-am654-base-board-u-boot.dtsi
@@ -19,14 +19,6 @@
&cbass_main{
u-boot,dm-spl;
- main_pmx1: pinmux at 11c2e8 {
- compatible = "pinctrl-single";
- reg = <0x0 0x11c2e8 0x0 0x24>;
- #pinctrl-cells = <1>;
- pinctrl-single,register-width = <32>;
- pinctrl-single,function-mask = <0xffffffff>;
- };
-
sdhci1: sdhci at 04FA0000 {
compatible = "ti,am654-sdhci-5.1";
reg = <0x0 0x4FA0000 0x0 0x1000>,
@@ -42,13 +34,6 @@
&cbass_mcu {
u-boot,dm-spl;
- wkup_pmx0: pinmux at 4301c000 {
- compatible = "pinctrl-single";
- reg = <0x0 0x4301c000 0x0 0x118>;
- #pinctrl-cells = <1>;
- pinctrl-single,register-width = <32>;
- pinctrl-single,function-mask = <0xffffffff>;
- };
navss_mcu: navss-mcu {
compatible = "simple-bus";
--
2.17.1
More information about the U-Boot
mailing list