[U-Boot] [PATCH v3 00/18] Add EEPROM-based board detect support for TI K3 SoCs

[Lokesh Vutla]

On 05/06/19 4:38 AM, Andreas Dannenberg wrote:
> This is an updated EEPROM-based board detection series that can applied
> if staged with other patches in the sequence proposed earlier [1].
> 
> For completeness here is the proposed sequence again, avoiding merge
> conflicts, but this time from the perspective of this patch series.
> 
> Step 1) Faiz' "Add Support for eMMC in Am65x-evm" series [2]. It needs
>         a small update to actuall allow for eMMC boot I posted earlier.
> Step 2) The updated (v2) SYSFW loader series just posted [3]
> Step 3) The updated AM654x EEPROM support proposed with this series
> Step 4) An updated version of Lokesh's "arm: k3: Allow for exclusive
>         and shared device requests" series [4]. In addition to a rebase
>         such an updated series should include updating power domain
>         properties for devices that were added during the previous
>         steps.
> Step 5) An updated version of Lokesh's "arm: k3: arm64: Initial support
>         Texas Instrument's J721E Platform" series [5] also adding
>         in the few lines of codes to leverage SYSFW.
> Step 6 & beyond) Various rproc patches, etc.
> 


tested this series on AM654 evm using SD boot. FWIW:
Tested-by: Lokesh Vutla <lokeshvutla at ti.com>

Thanks and regards,
Lokesh