[U-Boot] [PATCH] pci: Avoid assigning PCI resources that are below 0x1000

Bin Meng bmeng.cn at gmail.com
Wed Jun 5 14:10:11 UTC 2019


Hi Stefan,

On Wed, Jun 5, 2019 at 9:53 PM Stefan Roese <sr at denx.de> wrote:
>
> On 05.06.19 15:07, Bin Meng wrote:
> > commit b7598a43f2b4 ("[PATCH] Avoid assigning PCI resources from
> > zero address") only moved the bus lower address to 0x1000 if the
> > given bus start address is zero. The comment said 0x1000 is a
> > reasonable starting value, hence we'd better apply the same
> > adjustment when the given bus start address is below 0x1000.
> >
> > Signed-off-by: Bin Meng <bmeng.cn at gmail.com>
> > ---
> >
> >   drivers/pci/pci_auto_common.c | 7 +++++--
> >   1 file changed, 5 insertions(+), 2 deletions(-)
> >
> > diff --git a/drivers/pci/pci_auto_common.c b/drivers/pci/pci_auto_common.c
> > index 1837873..3ff42f2 100644
> > --- a/drivers/pci/pci_auto_common.c
> > +++ b/drivers/pci/pci_auto_common.c
> > @@ -21,9 +21,12 @@ void pciauto_region_init(struct pci_region *res)
> >       /*
> >        * Avoid allocating PCI resources from address 0 -- this is illegal
> >        * according to PCI 2.1 and moreover, this is known to cause Linux IDE
> > -      * drivers to fail. Use a reasonable starting value of 0x1000 instead.
> > +      * drivers to fail. Use a reasonable starting value of 0x1000 instead
> > +      * if the bus start address is below 0x1000.
> >        */
> > -     res->bus_lower = res->bus_start ? res->bus_start : 0x1000;
> > +     if (res->bus_start < 0x1000)
> > +             res->bus_start = 0x1000;
> > +     res->bus_lower = res->bus_start;
> >   }
> >
> >   void pciauto_region_align(struct pci_region *res, pci_size_t size)
> >
>
> Reviewed-by: Stefan Roese <sr at denx.de>
>

Thanks for the review. I just re-considered it a little bit, and
thought that we should not change res->bus_start here, as the original
logic did not change too. I will send a v2.

Regards,
Bin


More information about the U-Boot mailing list