[U-Boot] [PATCH v3 1/2] power: pmic: Kconfig: Add SPL_PMIC configs for palmas/lp873x/lp87565
Keerthy
j-keerthy at ti.com
Thu Jun 6 10:36:55 UTC 2019
Add SPL_PMIC configs for palmas/lp873x/lp87565. These were missing
and the Makefile already assumes them to be defined. Add the corresponding
SPL config options. This enables the pmics in SPL.
Signed-off-by: Keerthy <j-keerthy at ti.com>
---
Changes in v3:
* As per Tom's comments added the SPL_* configs instead of removing
SPL in Makefile
drivers/power/pmic/Kconfig | 21 +++++++++++++++++++++
1 file changed, 21 insertions(+)
diff --git a/drivers/power/pmic/Kconfig b/drivers/power/pmic/Kconfig
index b0cd260354..064b383880 100644
--- a/drivers/power/pmic/Kconfig
+++ b/drivers/power/pmic/Kconfig
@@ -238,3 +238,24 @@ config PMIC_STPMIC1
The STPMIC1 PMIC provides 4 BUCKs, 6 LDOs, 1 VREF and 2 power switches.
It is accessed via an I2C interface. The device is used with STM32MP1
SoCs. This driver implements register read/write operations.
+
+config SPL_PMIC_PALMAS
+ bool "Enable driver for Texas Instruments PALMAS PMIC"
+ depends on DM_PMIC
+ help
+ The PALMAS is a PMIC containing several LDOs, SMPS.
+ This driver binds the pmic children in SPL.
+
+config SPL_PMIC_LP873X
+ bool "Enable driver for Texas Instruments LP873X PMIC"
+ depends on DM_PMIC
+ help
+ The LP873X is a PMIC containing couple of LDOs and couple of SMPS.
+ This driver binds the pmic children in SPL.
+
+config SPL_PMIC_LP87565
+ bool "Enable driver for Texas Instruments LP87565 PMIC"
+ depends on DM_PMIC
+ help
+ The LP87565 is a PMIC containing a bunch of SMPS.
+ This driver binds the pmic children in SPL.
--
2.17.1
More information about the U-Boot
mailing list