[U-Boot] [PATCH v7 04/15] mmc: sdhci: Add support for sdhci-caps-mask

Faiz Abbas faiz_abbas at ti.com
Thu Jun 6 13:54:41 UTC 2019


Add Support for masking some bits in the capabilities
register of a host controller.

Also remove the redundant readl() into caps1.

Signed-off-by: Faiz Abbas <faiz_abbas at ti.com>
Reviewed-by: Tom Rini <trini at konsulko.com>
Tested-by: Lokesh Vutla <lokeshvutla at ti.com>
---
 drivers/mmc/sdhci.c | 15 ++++++++++-----
 1 file changed, 10 insertions(+), 5 deletions(-)

diff --git a/drivers/mmc/sdhci.c b/drivers/mmc/sdhci.c
index e2bb90abbd..fa6bb0a944 100644
--- a/drivers/mmc/sdhci.c
+++ b/drivers/mmc/sdhci.c
@@ -8,6 +8,7 @@
  */
 
 #include <common.h>
+#include <dm.h>
 #include <errno.h>
 #include <malloc.h>
 #include <mmc.h>
@@ -643,8 +644,15 @@ int sdhci_setup_cfg(struct mmc_config *cfg, struct sdhci_host *host,
 		u32 f_max, u32 f_min)
 {
 	u32 caps, caps_1 = 0;
+	u32 mask[2] = {0};
+	int ret;
+
+	ret = dev_read_u32_array(host->mmc->dev, "sdhci-caps-mask",
+				 mask, 2);
+	if (ret && ret != -1)
+		return ret;
 
-	caps = sdhci_readl(host, SDHCI_CAPABILITIES);
+	caps = ~mask[1] & sdhci_readl(host, SDHCI_CAPABILITIES);
 
 #ifdef CONFIG_MMC_SDHCI_SDMA
 	if (!(caps & SDHCI_CAN_DO_SDMA)) {
@@ -684,7 +692,7 @@ int sdhci_setup_cfg(struct mmc_config *cfg, struct sdhci_host *host,
 
 	/* Check whether the clock multiplier is supported or not */
 	if (SDHCI_GET_VERSION(host) >= SDHCI_SPEC_300) {
-		caps_1 = sdhci_readl(host, SDHCI_CAPABILITIES_1);
+		caps_1 = ~mask[0] & sdhci_readl(host, SDHCI_CAPABILITIES_1);
 		host->clk_mul = (caps_1 & SDHCI_CLOCK_MUL_MASK) >>
 				SDHCI_CLOCK_MUL_SHIFT;
 	}
@@ -741,9 +749,6 @@ int sdhci_setup_cfg(struct mmc_config *cfg, struct sdhci_host *host,
 		cfg->host_caps &= ~MMC_MODE_HS_52MHz;
 	}
 
-	if (SDHCI_GET_VERSION(host) >= SDHCI_SPEC_300)
-		caps_1 = sdhci_readl(host, SDHCI_CAPABILITIES_1);
-
 	if (!(cfg->voltages & MMC_VDD_165_195) ||
 	    (host->quirks & SDHCI_QUIRK_NO_1_8_V))
 		caps_1 &= ~(SDHCI_SUPPORT_SDR104 | SDHCI_SUPPORT_SDR50 |
-- 
2.19.2



More information about the U-Boot mailing list