[U-Boot] [PATCH v2 03/16] armv7R: K3: j721e: Unlock all applicable control MMR registers

Lokesh Vutla lokeshvutla at ti.com
Fri Jun 7 14:01:42 UTC 2019


From: Andreas Dannenberg <dannenberg at ti.com>

To access various control MMR functionality the registers need to
be unlocked. Do that for all control MMR regions in the MCU and MAIN
domains. We may want to go back later and limit the unlocking that's
being done.

Signed-off-by: Andreas Dannenberg <dannenberg at ti.com>
---
 arch/arm/mach-k3/j721e_init.c | 43 ++++++++++++++++++++++++++++++++++-
 1 file changed, 42 insertions(+), 1 deletion(-)

diff --git a/arch/arm/mach-k3/j721e_init.c b/arch/arm/mach-k3/j721e_init.c
index 80e88dd185..ba6a1cf0e6 100644
--- a/arch/arm/mach-k3/j721e_init.c
+++ b/arch/arm/mach-k3/j721e_init.c
@@ -14,14 +14,55 @@
 #include "common.h"
 
 #ifdef CONFIG_SPL_BUILD
+static void mmr_unlock(u32 base, u32 partition)
+{
+	/* Translate the base address */
+	phys_addr_t part_base = base + partition * CTRL_MMR0_PARTITION_SIZE;
+
+	/* Unlock the requested partition if locked using two-step sequence */
+	writel(CTRLMMR_LOCK_KICK0_UNLOCK_VAL, part_base + CTRLMMR_LOCK_KICK0);
+	writel(CTRLMMR_LOCK_KICK1_UNLOCK_VAL, part_base + CTRLMMR_LOCK_KICK1);
+}
+
+static void ctrl_mmr_unlock(void)
+{
+	/* Unlock all WKUP_CTRL_MMR0 module registers */
+	mmr_unlock(WKUP_CTRL_MMR0_BASE, 0);
+	mmr_unlock(WKUP_CTRL_MMR0_BASE, 1);
+	mmr_unlock(WKUP_CTRL_MMR0_BASE, 2);
+	mmr_unlock(WKUP_CTRL_MMR0_BASE, 3);
+	mmr_unlock(WKUP_CTRL_MMR0_BASE, 4);
+	mmr_unlock(WKUP_CTRL_MMR0_BASE, 6);
+	mmr_unlock(WKUP_CTRL_MMR0_BASE, 7);
+
+	/* Unlock all MCU_CTRL_MMR0 module registers */
+	mmr_unlock(MCU_CTRL_MMR0_BASE, 0);
+	mmr_unlock(MCU_CTRL_MMR0_BASE, 1);
+	mmr_unlock(MCU_CTRL_MMR0_BASE, 2);
+	mmr_unlock(MCU_CTRL_MMR0_BASE, 3);
+	mmr_unlock(MCU_CTRL_MMR0_BASE, 4);
+
+	/* Unlock all CTRL_MMR0 module registers */
+	mmr_unlock(CTRL_MMR0_BASE, 0);
+	mmr_unlock(CTRL_MMR0_BASE, 1);
+	mmr_unlock(CTRL_MMR0_BASE, 2);
+	mmr_unlock(CTRL_MMR0_BASE, 3);
+	mmr_unlock(CTRL_MMR0_BASE, 4);
+	mmr_unlock(CTRL_MMR0_BASE, 5);
+	mmr_unlock(CTRL_MMR0_BASE, 6);
+	mmr_unlock(CTRL_MMR0_BASE, 7);
+}
+
 void board_init_f(ulong dummy)
 {
 	/*
 	 * ToDo:
 	 * - Store boot rom index.
-	 * - unlock mmr.
 	 */
 
+	/* Make all control module registers accessible */
+	ctrl_mmr_unlock();
+
 #ifdef CONFIG_CPU_V7R
 	setup_k3_mpu_regions();
 #endif
-- 
2.21.0



More information about the U-Boot mailing list