[U-Boot] [PATCH 2/2] mx6sx: vining2000: pinmux usdhc4 reset
Stefano Babic
sbabic at denx.de
Sun Jun 9 08:33:53 UTC 2019
Hi Marek,
On 17/05/19 21:19, Marek Vasut wrote:
> From: Christoph Fritz <chf.fritz at googlemail.com>
>
> This patch configures pinmux for pin usdhc4 reset.
>
> Signed-off-by: Christoph Fritz <chf.fritz at googlemail.com>
> ---
> board/softing/vining_2000/vining_2000.c | 4 ++++
> 1 file changed, 4 insertions(+)
>
> diff --git a/board/softing/vining_2000/vining_2000.c b/board/softing/vining_2000/vining_2000.c
^---- new path
> index 77c34e39be..30693c0cdf 100644
> --- a/board/softing/vining_2000/vining_2000.c
> +++ b/board/softing/vining_2000/vining_2000.c
> @@ -58,6 +58,9 @@ DECLARE_GLOBAL_DATA_PTR;
> PAD_CTL_PKE | PAD_CTL_SPEED_MED | PAD_CTL_DSE_80ohm | \
> PAD_CTL_SRE_FAST)
>
> +#define USDHC_RESET_CTRL (PAD_CTL_HYS | PAD_CTL_PUS_47K_UP | \
> + PAD_CTL_PKE | PAD_CTL_SPEED_MED | PAD_CTL_DSE_80ohm)
> +
> #define GPIO_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_PUS_100K_UP | \
> PAD_CTL_PKE)
>
> @@ -94,6 +97,7 @@ static iomux_v3_cfg_t const usdhc4_pads[] = {
> MX6_PAD_SD4_DATA5__USDHC4_DATA5 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
> MX6_PAD_SD4_DATA6__USDHC4_DATA6 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
> MX6_PAD_SD4_DATA7__USDHC4_DATA7 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
> + MX6_PAD_SD4_RESET_B__USDHC4_RESET_B | MUX_PAD_CTRL(USDHC_RESET_CTRL),
> };
>
> static iomux_v3_cfg_t const fec1_pads[] = {
>
FYI: I am applying this together with the series "ARM: imx: Update
VINING|2000 to DM/DT". However, this patch applies after renaming the
vendor to softimg, and it cannot be applied (the series is a follow up
of this patch). It is also different from
the patch you applied on your own tree (you applied to samtec and not
softimg):
https://github.com/marex/u-boot-imx/commit/3bbd03e4edf419ff3eb00e58f6b4d73d216f8202
I have just applied this as you did before renaming, no need to repost -
I am just tracking while the applied patch differs from the one in
patchwork.
Regards,
Stefano
--
=====================================================================
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================
More information about the U-Boot
mailing list