[U-Boot] [PATCH v1 06/11] DTS: imx: Add display5 board (imx6q based) device tree description (v5.1)

Peng Fan peng.fan at nxp.com
Mon Jun 10 01:41:55 UTC 2019


> Subject: [PATCH v1 06/11] DTS: imx: Add display5 board (imx6q based) device
> tree description (v5.1)
> 
> This commit ports from Linux kernel - tag: v5.1 - the device tree description
> for display5 board.
> 
> Signed-off-by: Lukasz Majewski <lukma at denx.de>
> ---
> 
>  arch/arm/dts/imx6q-display5.dts | 352
> ++++++++++++++++++++++++++++++++++++++++
>  1 file changed, 352 insertions(+)
> 
> diff --git a/arch/arm/dts/imx6q-display5.dts
> b/arch/arm/dts/imx6q-display5.dts index 50347ff26b..4e2aa363ed 100644
> --- a/arch/arm/dts/imx6q-display5.dts
> +++ b/arch/arm/dts/imx6q-display5.dts
> @@ -10,9 +10,361 @@
> 
>  /dts-v1/;
> 
> +#include <dt-bindings/gpio/gpio.h>
>  #include "imx6q.dtsi"
> 
>  / {
>  	model = "Liebherr (LWN) display5 i.MX6 Quad Board";
>  	compatible = "lwn,display5", "fsl,imx6q";
> +
> +	memory at 10000000 {
> +		device_type = "memory";
> +		reg = <0x10000000 0x40000000>;
> +	};
> +};
> +
> +&ecspi2 {
> +	cs-gpios = <&gpio5 29 GPIO_ACTIVE_LOW>;
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_ecspi2 &pinctrl_ecspi2_cs &pinctrl_ecspi2_flwp>;
> +	status = "okay";
> +
> +	s25fl256s: flash at 0 {
> +		#address-cells = <1>;
> +		#size-cells = <1>;
> +		compatible = "jedec,spi-nor";
> +		spi-max-frequency = <40000000>;
> +		reg = <0>;
> +
> +		partition at 0 {
> +			label = "SPL (spi)";
> +			reg = <0x0 0x20000>;
> +			read-only;
> +		};
> +		partition at 1 {
> +			label = "u-boot (spi)";
> +			reg = <0x20000 0x100000>;
> +			read-only;
> +		};
> +		partition at 2 {
> +			label = "uboot-env (spi)";
> +			reg = <0x120000 0x10000>;
> +		};
> +		partition at 3 {
> +			label = "uboot-envr (spi)";
> +			reg = <0x130000 0x10000>;
> +		};
> +		partition at 4 {
> +			label = "linux-recovery (spi)";
> +			reg = <0x140000 0x800000>;
> +		};
> +		partition at 5 {
> +			label = "swupdate-fitImg (spi)";
> +			reg = <0x940000 0x400000>;
> +		};
> +		partition at 6 {
> +			label = "swupdate-initramfs (spi)";
> +			reg = <0xD40000 0x800000>;
> +		};
> +	};
> +};
> +
> +&ecspi3 {
> +	cs-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>;
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_ecspi3 &pinctrl_ecspi3_cs &pinctrl_ecspi3_flwp>;
> +	status = "okay";
> +};
> +
> +&fec {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_enet>;
> +	phy-handle = <&ethernet_phy0>;
> +	phy-mode = "rgmii-id";
> +	status = "okay";
> +
> +	mdio {
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +		ethernet_phy0: ethernet-phy at 0 {
> +			compatible = "marvell,88E1510";
> +			device_type = "ethernet-phy";
> +			/* Set LED0 control: */
> +			/* On - Link, Blink - Activity, Off - No Link */
> +			marvell,reg-init = <3 0x10 0 0x1011>;
> +			max-speed = <100>;
> +			reg = <0>;
> +		};
> +	};
> +};
> +
> +&i2c1 {
> +	clock-frequency = <400000>;
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_i2c1>;
> +	status = "okay";
> +
> +	codec: tfa9879 at 6c {
> +		#sound-dai-cells = <0>;
> +		compatible = "nxp,tfa9879";
> +		reg = <0x6C>;
> +	};
> +};
> +
> +&i2c2 {
> +	clock-frequency = <400000>;
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_i2c2>;
> +	status = "okay";
> +};
> +
> +&i2c3 {
> +	clock-frequency = <400000>;
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_i2c3>;
> +	status = "okay";
> +
> +	at24 at 50 {
> +		compatible = "atmel,24c256";
> +		pagesize = <64>;
> +		reg = <0x50>;
> +	};
> +
> +	pfuze100: pmic at 8 {
> +		compatible = "fsl,pfuze100";
> +		reg = <0x08>;
> +
> +		regulators {
> +			sw1a_reg: sw1ab {
> +				regulator-min-microvolt = <300000>;
> +				regulator-max-microvolt = <1875000>;
> +				regulator-boot-on;
> +				regulator-always-on;
> +				regulator-ramp-delay = <6250>;
> +			};
> +
> +			sw1c_reg: sw1c {
> +				regulator-min-microvolt = <300000>;
> +				regulator-max-microvolt = <1875000>;
> +				regulator-boot-on;
> +				regulator-always-on;
> +				regulator-ramp-delay = <6250>;
> +			};
> +
> +			sw2_reg: sw2 {
> +				regulator-min-microvolt = <800000>;
> +				regulator-max-microvolt = <3950000>;
> +				regulator-boot-on;
> +				regulator-always-on;
> +			};
> +
> +			sw3a_reg: sw3a {
> +				regulator-min-microvolt = <400000>;
> +				regulator-max-microvolt = <1975000>;
> +				regulator-boot-on;
> +				regulator-always-on;
> +			};
> +
> +			sw3b_reg: sw3b {
> +				regulator-min-microvolt = <400000>;
> +				regulator-max-microvolt = <1975000>;
> +				regulator-boot-on;
> +				regulator-always-on;
> +			};
> +
> +			sw4_reg: sw4 {
> +				regulator-min-microvolt = <800000>;
> +				regulator-max-microvolt = <3300000>;
> +			};
> +
> +			swbst_reg: swbst {
> +				regulator-min-microvolt = <5000000>;
> +				regulator-max-microvolt = <5150000>;
> +			};
> +
> +			snvs_reg: vsnvs {
> +				regulator-min-microvolt = <1000000>;
> +				regulator-max-microvolt = <3000000>;
> +				regulator-boot-on;
> +				regulator-always-on;
> +			};
> +
> +			vref_reg: vrefddr {
> +				regulator-boot-on;
> +				regulator-always-on;
> +			};
> +
> +			vgen1_reg: vgen1 {
> +				regulator-min-microvolt = <800000>;
> +				regulator-max-microvolt = <1550000>;
> +			};
> +
> +			vgen2_reg: vgen2 {
> +				regulator-min-microvolt = <800000>;
> +				regulator-max-microvolt = <1550000>;
> +			};
> +
> +			vgen3_reg: vgen3 {
> +				regulator-min-microvolt = <1800000>;
> +				regulator-max-microvolt = <3300000>;
> +			};
> +
> +			vgen4_reg: vgen4 {
> +				regulator-min-microvolt = <1800000>;
> +				regulator-max-microvolt = <3300000>;
> +				regulator-always-on;
> +			};
> +
> +			vgen5_reg: vgen5 {
> +				regulator-min-microvolt = <1800000>;
> +				regulator-max-microvolt = <3300000>;
> +				regulator-always-on;
> +			};
> +
> +			vgen6_reg: vgen6 {
> +				regulator-min-microvolt = <1800000>;
> +				regulator-max-microvolt = <3300000>;
> +				regulator-always-on;
> +			};
> +		};
> +	};
> +};
> +
> +&uart4 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_uart4>;
> +	uart-has-rtscts;
> +	status = "okay";
> +};
> +
> +&uart5 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_uart5>;
> +	status = "okay";
> +};
> +
> +&usdhc4 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_usdhc4>;
> +	bus-width = <8>;
> +	non-removable;
> +	status = "okay";
> +};
> +
> +&iomuxc {
> +	pinctrl_ecspi2: ecspi2grp {
> +		fsl,pins = <
> +			MX6QDL_PAD_CSI0_DAT10__ECSPI2_MISO	0x100b1
> +			MX6QDL_PAD_CSI0_DAT9__ECSPI2_MOSI	0x100b1
> +			MX6QDL_PAD_CSI0_DAT8__ECSPI2_SCLK	0x100b1
> +		>;
> +	};
> +
> +	pinctrl_ecspi2_cs: ecspi2csgrp {
> +		fsl,pins = <
> +			MX6QDL_PAD_CSI0_DAT11__GPIO5_IO29 0x100b1
> +		>;
> +	};
> +
> +	pinctrl_ecspi2_flwp: ecspi2flwpgrp {
> +		fsl,pins = <
> +			MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x1b0b0
> +		>;
> +	};
> +
> +	pinctrl_ecspi3: ecspi3grp {
> +		fsl,pins = <
> +			MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO	0x100b1
> +			MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI	0x100b1
> +			MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK	0x100b1
> +		>;
> +	};
> +
> +	pinctrl_ecspi3_cs: ecspi3csgrp {
> +		fsl,pins = <
> +			MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24 0x1b0b0
> +		>;
> +	};
> +
> +	pinctrl_ecspi3_flwp: ecspi3flwpgrp {
> +		fsl,pins = <
> +			MX6QDL_PAD_DISP0_DAT6__GPIO4_IO27 0x1b0b0
> +		>;
> +	};
> +
> +	pinctrl_enet: enetgrp {
> +		fsl,pins = <
> +			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
> +			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
> +			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b0b0
> +			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b0b0
> +			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b0b0
> +			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b0b0
> +			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b0b0
> +			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b0b0
> +			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
> +			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b0b0
> +			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b0b0
> +			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b0b0
> +			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b0b0
> +			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b0b0
> +			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b0b0
> +			MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8
> +			MX6QDL_PAD_GPIO_6__ENET_IRQ		0x000b1
> +			MX6QDL_PAD_ENET_RXD0__GPIO1_IO27        0x1b0b0
> +		>;
> +	};
> +
> +	pinctrl_i2c1: i2c1grp {
> +		fsl,pins = <
> +			MX6QDL_PAD_EIM_D21__I2C1_SCL	0x4001b8b1
> +			MX6QDL_PAD_EIM_D28__I2C1_SDA	0x4001b8b1
> +		>;
> +	};
> +
> +	pinctrl_i2c2: i2c2grp {
> +		fsl,pins = <
> +			MX6QDL_PAD_EIM_EB2__I2C2_SCL	0x4001b8b1
> +			MX6QDL_PAD_EIM_D16__I2C2_SDA	0x4001b8b1
> +		>;
> +	};
> +
> +	pinctrl_i2c3: i2c3grp {
> +		fsl,pins = <
> +			MX6QDL_PAD_EIM_D17__I2C3_SCL	0x4001b8b1
> +			MX6QDL_PAD_EIM_D18__I2C3_SDA	0x4001b8b1
> +		>;
> +	};
> +
> +	pinctrl_uart4: uart4grp {
> +		fsl,pins = <
> +			MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA	0x1b0b1
> +			MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA	0x1b0b1
> +			MX6QDL_PAD_CSI0_DAT16__UART4_RTS_B	0x1b0b1
> +			MX6QDL_PAD_CSI0_DAT17__UART4_CTS_B	0x1b0b1
> +		>;
> +	};
> +
> +	pinctrl_uart5: uart5grp {
> +		fsl,pins = <
> +			MX6QDL_PAD_CSI0_DAT14__UART5_TX_DATA	0x1b0b1
> +			MX6QDL_PAD_CSI0_DAT15__UART5_RX_DATA    0x1b0b1
> +		>;
> +	};
> +
> +	pinctrl_usdhc4: usdhc4grp {
> +		fsl,pins = <
> +			MX6QDL_PAD_SD4_CMD__SD4_CMD		0x17059
> +			MX6QDL_PAD_SD4_CLK__SD4_CLK		0x10059
> +			MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x17059
> +			MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x17059
> +			MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x17059
> +			MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x17059
> +			MX6QDL_PAD_SD4_DAT4__SD4_DATA4		0x17059
> +			MX6QDL_PAD_SD4_DAT5__SD4_DATA5		0x17059
> +			MX6QDL_PAD_SD4_DAT6__SD4_DATA6		0x17059
> +			MX6QDL_PAD_SD4_DAT7__SD4_DATA7		0x17059
> +			MX6QDL_PAD_NANDF_ALE__SD4_RESET	0x17059
> +		>;
> +	};

Reviewed-by: Peng Fan <peng.fan at nxp.com>

>  };
> --
> 2.11.0



More information about the U-Boot mailing list