[U-Boot] [PATCH v2] imx: Extend PCL063 support for phyCORE-i.MX6ULL

sbabic at denx.de sbabic at denx.de
Mon Jun 10 09:39:34 UTC 2019


> Extend PHYTEC phyBOARD-i.MX6UL for phyCORE-i.MX6UL SoM (PCL063)
> with eMMC on SoM.
> CPU:   Freescale i.MX6ULL rev1.0 792 MHz (running at 396 MHz)
> CPU:   Industrial temperature grade (-40C to 105C) at 38C
> Reset cause: POR
> Model: Phytec phyBOARD-i.MX6ULL-Segin SBC
> Board: PHYTEC phyCORE-i.MX6ULL
> DRAM:  256 MiB
> MMC:   FSL_SDHC: 0, FSL_SDHC: 1
> In:    serial at 02020000
> Out:   serial at 02020000
> Err:   serial at 02020000
> Net:   FEC0
> Working:
>  - Eth0
>  - i2C
>  - MMC/SD
>  - eMMC
>  - UART (1 & 5)
>  - USB (host & otg)
> Signed-off-by: Parthiban Nallathambi <parthitce at gmail.com>

Applied to u-boot-imx, master, thanks !

Best regards,
Stefano Babic

-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================



More information about the U-Boot mailing list