[U-Boot] [RFC 0/4] Convert fsl_dcu_fb to DM_VIDEO
Igor Opaniuk
igor.opaniuk at gmail.com
Mon Jun 10 11:47:48 UTC 2019
From: Igor Opaniuk <igor.opaniuk at toradex.com>
This series of patches refactors and extends NXP DCU video driver to
be built with DM_VIDEO enabled. DTS files must additionally include
'u-boot,dm-pre-reloc' property in soc and child nodes to enable driver
binding to fsl_dcu_fb device.
Current limitations: configuration (display timings etc.) isn't fetched
from the DT node. I plan to add this in the next series.
Also enables DM_VIDEO by default for Colibri VF.
Igor Opaniuk (4):
video: fsl_dcu_fb: refactor init functions
video: fsl_dcu_fb: add DM_VIDEO support
ARM: dts: colibri_vf: Add dcu0 node
colibri_vf: enable DM_VIDEO
arch/arm/dts/vf-colibri-u-boot.dtsi | 4 +
arch/arm/dts/vf-colibri.dtsi | 5 +
arch/arm/dts/vf.dtsi | 6 +
board/freescale/ls1021aqds/dcu.c | 6 +-
board/toradex/colibri_vf/colibri_vf.c | 4 +-
board/toradex/colibri_vf/dcu.c | 6 +-
configs/colibri_vf_defconfig | 2 +-
drivers/video/Kconfig | 2 +-
drivers/video/fsl_dcu_fb.c | 213 ++++++++++++++++++--------
include/fsl_dcu_fb.h | 12 +-
10 files changed, 187 insertions(+), 73 deletions(-)
--
2.17.1
More information about the U-Boot
mailing list