[U-Boot] [PATCH v2 2/6] board: stm32mp1: Add board_interface_eth_init

Patrice CHOTARD patrice.chotard at st.com
Tue Jun 11 07:34:55 UTC 2019



On 5/17/19 3:08 PM, Christophe Roullier wrote:
> Called to configure Ethernet PHY interface selection and
> configure clock selection in RCC Ethernet clock tree.
> 
> Signed-off-by: Christophe Roullier <christophe.roullier at st.com>
> ---
> 
> Changes in v2: None
> 
>  board/st/stm32mp1/stm32mp1.c | 68 ++++++++++++++++++++++++++++++++++--
>  1 file changed, 65 insertions(+), 3 deletions(-)
> 
> diff --git a/board/st/stm32mp1/stm32mp1.c b/board/st/stm32mp1/stm32mp1.c
> index 76917b022ed..e120fc57223 100644
> --- a/board/st/stm32mp1/stm32mp1.c
> +++ b/board/st/stm32mp1/stm32mp1.c
> @@ -51,9 +51,9 @@
>  #define SYSCFG_PMCSETR_ETH_SELMII	BIT(20)
>  
>  #define SYSCFG_PMCSETR_ETH_SEL_MASK	GENMASK(23, 21)
> -#define SYSCFG_PMCSETR_ETH_SEL_GMII_MII	(0 << 21)
> -#define SYSCFG_PMCSETR_ETH_SEL_RGMII	(1 << 21)
> -#define SYSCFG_PMCSETR_ETH_SEL_RMII	(4 << 21)
> +#define SYSCFG_PMCSETR_ETH_SEL_GMII_MII	0
> +#define SYSCFG_PMCSETR_ETH_SEL_RGMII	BIT(21)
> +#define SYSCFG_PMCSETR_ETH_SEL_RMII	BIT(23)
>  
>  /*
>   * Get a global data pointer
> @@ -504,3 +504,65 @@ void board_quiesce_devices(void)
>  {
>  	setup_led(LEDST_OFF);
>  }
> +
> +/* board interface eth init */
> +/* this is a weak define that we are overriding */
> +int board_interface_eth_init(phy_interface_t interface_type,
> +			     bool eth_clk_sel_reg, bool eth_ref_clk_sel_reg)
> +{
> +	u8 *syscfg;
> +	u32 value;
> +
> +	syscfg = (u8 *)syscon_get_first_range(STM32MP_SYSCON_SYSCFG);
> +
> +	if (!syscfg)
> +		return -ENODEV;
> +
> +	switch (interface_type) {
> +	case PHY_INTERFACE_MODE_MII:
> +		value = SYSCFG_PMCSETR_ETH_SEL_GMII_MII |
> +			SYSCFG_PMCSETR_ETH_REF_CLK_SEL;
> +		debug("%s: PHY_INTERFACE_MODE_MII\n", __func__);
> +		break;
> +	case PHY_INTERFACE_MODE_GMII:
> +		if (eth_clk_sel_reg)
> +			value = SYSCFG_PMCSETR_ETH_SEL_GMII_MII |
> +				SYSCFG_PMCSETR_ETH_CLK_SEL;
> +		else
> +			value = SYSCFG_PMCSETR_ETH_SEL_GMII_MII;
> +		debug("%s: PHY_INTERFACE_MODE_GMII\n", __func__);
> +		break;
> +	case PHY_INTERFACE_MODE_RMII:
> +		if (eth_ref_clk_sel_reg)
> +			value = SYSCFG_PMCSETR_ETH_SEL_RMII |
> +				SYSCFG_PMCSETR_ETH_REF_CLK_SEL;
> +		else
> +			value = SYSCFG_PMCSETR_ETH_SEL_RMII;
> +		debug("%s: PHY_INTERFACE_MODE_RMII\n", __func__);
> +		break;
> +	case PHY_INTERFACE_MODE_RGMII:
> +	case PHY_INTERFACE_MODE_RGMII_ID:
> +	case PHY_INTERFACE_MODE_RGMII_RXID:
> +	case PHY_INTERFACE_MODE_RGMII_TXID:
> +		if (eth_clk_sel_reg)
> +			value = SYSCFG_PMCSETR_ETH_SEL_RGMII |
> +				SYSCFG_PMCSETR_ETH_CLK_SEL;
> +		else
> +			value = SYSCFG_PMCSETR_ETH_SEL_RGMII;
> +		debug("%s: PHY_INTERFACE_MODE_RGMII\n", __func__);
> +		break;
> +	default:
> +		debug("%s: Do not manage %d interface\n",
> +		      __func__, interface_type);
> +		/* Do not manage others interfaces */
> +		return -EINVAL;
> +	}
> +
> +	/* clear and set ETH configuration bits */
> +	writel(SYSCFG_PMCSETR_ETH_SEL_MASK | SYSCFG_PMCSETR_ETH_SELMII |
> +	       SYSCFG_PMCSETR_ETH_REF_CLK_SEL | SYSCFG_PMCSETR_ETH_CLK_SEL,
> +	       syscfg + SYSCFG_PMCCLRR);
> +	writel(value, syscfg + SYSCFG_PMCSETR);
> +
> +	return 0;
> +}
> 


Applied

Thanks


More information about the U-Boot mailing list