[U-Boot] [PATCH v2 5/6] stm32mp1: Add Ethernet support for stm32mp1 board

[Patrice CHOTARD]

On 5/17/19 3:08 PM, Christophe Roullier wrote:
> Add default SERVERIP address
> Enable noncached memory region required by ethernet driver
> Add PXE support
> 
> Signed-off-by: Christophe Roullier <christophe.roullier at st.com>
> ---
> 
> Changes in v2: None
> 
>  include/configs/stm32mp1.h | 12 +++++++++++-
>  1 file changed, 11 insertions(+), 1 deletion(-)
> 
> diff --git a/include/configs/stm32mp1.h b/include/configs/stm32mp1.h
> index fd6c97a0c61..cc14f6169b9 100644
> --- a/include/configs/stm32mp1.h
> +++ b/include/configs/stm32mp1.h
> @@ -78,6 +78,14 @@
>  /*MMC SD*/
>  #define CONFIG_SYS_MMC_MAX_DEVICE	3
>  
> +/* Ethernet need */
> +#ifdef CONFIG_DWC_ETH_QOS
> +#define CONFIG_SYS_NONCACHED_MEMORY	(1 * SZ_1M)	/* 1M */
> +#define CONFIG_SERVERIP                 192.168.1.1
> +#define CONFIG_BOOTP_SERVERIP
> +#define CONFIG_SYS_AUTOLOAD		"no"
> +#endif
> +
>  /*****************************************************************************/
>  #ifdef CONFIG_DISTRO_DEFAULTS
>  /*****************************************************************************/
> @@ -87,7 +95,9 @@
>  #define BOOT_TARGET_DEVICES(func) \
>  	func(MMC, mmc, 1) \
>  	func(MMC, mmc, 0) \
> -	func(MMC, mmc, 2)
> +	func(MMC, mmc, 2) \
> +	func(PXE, pxe, na)
> +
>  /*
>   * bootcmd for stm32mp1:
>   * for serial/usb: execute the stm32prog command
> 

Applied

Thanks