[U-Boot] [PATCH 4/5] armv8: dts: fsl-ls1088a: add I2C node support

[Chuanhua Han]

One ls1088a, there is four I2C controllers.
This patch is to add I2C node for ls1088a.

Signed-off-by: Chuanhua Han <chuanhua.han at nxp.com>
---
depends on: 
	- http://patchwork.ozlabs.org/project/uboot/list/?series=110856
	- http://patchwork.ozlabs.org/project/uboot/list/?series=109459

 arch/arm/dts/fsl-ls1088a.dtsi | 32 ++++++++++++++++++++++++++++++++
 1 file changed, 32 insertions(+)

diff --git a/arch/arm/dts/fsl-ls1088a.dtsi b/arch/arm/dts/fsl-ls1088a.dtsi
index 7c705858fd..4be1ab87d2 100644
--- a/arch/arm/dts/fsl-ls1088a.dtsi
+++ b/arch/arm/dts/fsl-ls1088a.dtsi
@@ -34,6 +34,38 @@
 			     <1 10 0x8>; /* Hypervisor PPI, active-low */
 	};
 
+	i2c0: i2c at 2000000 {
+		compatible = "fsl,vf610-i2c";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x0 0x2000000 0x0 0x10000>;
+		interrupts = <0 34 4>;
+	};
+
+	i2c1: i2c at 2010000 {
+		compatible = "fsl,vf610-i2c";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x0 0x2010000 0x0 0x10000>;
+		interrupts = <0 34 4>;
+	};
+
+	i2c2: i2c at 2020000 {
+		compatible = "fsl,vf610-i2c";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x0 0x2020000 0x0 0x10000>;
+		interrupts = <0 35 4>;
+	};
+
+	i2c3: i2c at 2030000 {
+		compatible = "fsl,vf610-i2c";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x0 0x2030000 0x0 0x10000>;
+		interrupts = <0 35 4>;
+	};
+
 	serial0: serial at 21c0500 {
 		device_type = "serial";
 		compatible = "fsl,ns16550", "ns16550a";
-- 
2.17.1