[U-Boot] [PATCH 00/92] ram: rk3399: Add LPDDR4 support
Philipp Tomsich
philipp.tomsich at theobroma-systems.com
Tue Jun 11 14:53:33 UTC 2019
> On 11.06.2019, at 16:50, Jagan Teki <jagan at amarulasolutions.com> wrote:
>
> Yes, it can be possible to break this series into multiple sub series
> but idea here is to mark all the required changes to support LPDDR4
> in rk3399 in one set. if required we can break it from next versions.
>
> This is the initial set for supporting LPDDR4 with associated
> features.
>
> Thanks to
> - YouMin Chen
> - Akash Gajjar
> - Kever Yang
> for supporting all the help on this work.
>
> On summary this series support
> - Code warning and fixes
> - rank detection, this would required to probe single channel
> sdram configured in NanoPI-NEO4
> - LPDDR4 support, tested in Rockpro64 and Rock-PI-4
>
> patch 0001 - 0033: fix code warnings, prints, new macros
>
> patch 0034 - 0051: rank detection, sdram debug code
>
> patch 0052: Use DDR3-1800 on NanoPI-NEO4
>
> patch 0053 - 0089: lpddr4 support
>
> patch 0090: LPDDR4-100 timings
>
> patch 0091: Use LPDDR4-100 on Rockpro64
>
> patch 0092: Use LPDDR4-100 on Rock-PI 4
>
> Note: Puma rk3399 has SPL size overflow, better to enable TPL
> for this board.
We need to keep Puma on a SPL-only configuration for the time being.
Please make sure that the LPDDR4 code is an optional feature that does not
increase the DRAM-driver size for boards that don’t need/want it.
Thanks,
Philipp.
>
> Any inputs?
> Jagan.
>
> Jagan Teki (92):
> ram: rk3399: Fix code warnings
> ram: rk3399: Add space between string with format specifier
> ram: rk3399: Add proper spaces in data training
> ram: rk3399: Handle data training return types
> ram: rk3399: Order include files
> ram: rk3399: Move macro after include files
> ram: rk3399: Clear PI_175 interrupts in data training
> ram: rk3399: Use rank mask in ca data training
> ram: rk3399: Use rank mask in wdql data training
> ram: rk3399: Add ddrtype enc macro
> ram: rk3399: Add channel number encoder macro
> ram: rk3399: Add row_3_4 enc macro
> ram: rk3399: Add chipinfo macro
> ram: rk3399: Add rank enc macro
> ram: rk3399: Add column enc macro
> ram: rk3399: Add bk enc macro
> ram: rk3399: Add dbw enc macro
> ram: rk3399: Add cs0_rw macro
> ram: rk3399: Add cs1_rw macro
> ram: rk3399: Add bw enc macro
> ram: rk3399: Rename sys_reg with sys_reg2
> ram: rk3399: Update cs0_row to use sys_reg3
> ram: rk3399: Update cs1_row to use sys_reg3
> ram: rk3399: Add cs1_col enc macro
> ram: rk3399: Add ddr version enc macro
> ram: rk3399: Add ddrtimingC0
> ram: rk3399: Add DdrMode
> ram: rk3399: Handle pctl_cfg return type
> ram: rk3399: s/tsel_wr_select_n/tsel_wr_select_dq_n
> ram: rk3399: s/tsel_wr_select_p/tsel_wr_select_dq_p
> ram: rk3399: s/ca_tsel_wr_select_n/tsel_wr_select_ca_n
> ram: rk3399: s/ca_tsel_wr_select_p/tsel_wr_select_ca_p
> ram: rk3399: Order tsel variables
> ram: rk3399: Add phy pctrl reset support
> ram: rk3399: Move pwrup_srefresh_exit to dram_info
> ram: rk3399: Add pctl start support
> ram: rockchip: rk3399: Add cap_info structure
> ram: rk3399: s/rk3399_base_params/sdram_base_params
> ram: rk3399: Move common sdram structures in common header
> arm: include: rockchip: Move dramtypes to common header
> arm: include: rockchip: Add DDR4 enum
> ram: rockchip: Add initial Kconfig
> debug_uart: Add printdec
> ram: rockchip: Add debug sdram driver
> ram: rockchip: debug: Add sdram_print_ddr_info
> ram: rockchip: debug: Get the cs capacity
> ram: rk3399: debug: Add sdram_print_stride
> ram: rk3399: Compute stride for 2 channels
> ram: rk3399: Compute stride for 1 channel a
> ram: rk3399: Add rank detection support
> ram: rk3399: Enable sdram debug functions
> rockchip: dts: rk3399: nanopi-neo4: Use DDR3-1866 dtsi
> clk: rockchip: rk3399: Fix check patch warnings and checks
> clk: rockchip: rk3399: Set 50MHz ddr clock
> clk: rockchip: rk3399: Set 400MHz ddr clock
> ram: rk3399: Add spaces in pctl_cfg
> ram: rk3399: Configure phy IO in ds odt
> ram: rk3399: Add lpddr4 rank mask for cs training
> ram: rk3399: Add lpddr4 rank mask for wdql training
> ram: rk3399: Move mode_sel assignment
> ram: rk3399: Don't wait for PLL lock in lpddr4
> ram: rk3399: Avoid two channel ZQ Cal Start at the same time
> ram: rk3399: Configure PHY_898, PHY_919 for lpddr4
> ram: rk3399: Configure BOOSTP_EN, BOOSTN_EN for lpddr4
> ram: rk3399: Configure SLEWP_EN, SLEWN_EN for lpddr4
> ram: rk3399: Configure PHY RX_CM_INPUT for lpddr4
> ram: rk3399: Map chipselect for lpddr4
> ram: rk3399: Configure tsel write ca for lpddr4
> ram: rk3399: Don't disable dfi dram clk for lpddr4, rank 1
> ram: rk3399: Add IO settings
> ram: sdram: Configure lpddr4 tsel rd, wr based on IO settings
> ram: rk3399: Add tsel control clock drive
> ram: rk3399: Configure soc odt support
> ram: rk3399: Get lpddr4 tsel_rd_en from io settings
> ram: rk3399: Update lpddr4 vref based on io settings
> ram: rk3399: Update lpddr4 mode_sel based on io settings
> ram: rk3399: Update lpddr4 vref_mode_ac
> ram: rk3399: Add LPPDR4 mr detection
> arm: include: rockchip: Add rk3399 pmu file
> rockchip: rk3399: syscon: Add pmu support
> rockchip: dts: rk3399: Add u-boot,dm-pre-reloc for pmu
> ram: rk3399: Add LPPDDR4-400 timings inc
> ram: rk3399: Add LPPDDR4-800 timings inc
> ram: rk3399: Add lpddr4 set rate support
> ram: rk3399: Set lpddr4 dq odt
> ram: rk3399: Set lpddr4 ca odt
> ram: rk3399: Set lpddr4 MR3
> ram: rk3399: Set lpddr4 MR12
> ram: rk3399: Set lpddr4 MR14
> rockchip: dts: rk3399: Add LPDDR4-100 timings
> rockchip: dts: rk3399: rockpro64: Use LPDDR4-100 dtsi
> rockchip: dts: rk3399: rock-pi-4: Use LPDDR4-100 dtsi
>
> arch/arm/dts/rk3399-nanopi-neo4-u-boot.dtsi | 1 +
> arch/arm/dts/rk3399-rock-pi-4-u-boot.dtsi | 1 +
> arch/arm/dts/rk3399-rockpro64-u-boot.dtsi | 1 +
> arch/arm/dts/rk3399-sdram-lpddr4-100.dtsi | 1537 ++++++++++++
> arch/arm/dts/rk3399-u-boot.dtsi | 4 +
> .../include/asm/arch-rockchip/pmu_rk3399.h | 72 +
> arch/arm/include/asm/arch-rockchip/sdram.h | 6 -
> .../include/asm/arch-rockchip/sdram_common.h | 89 +
> .../include/asm/arch-rockchip/sdram_rk322x.h | 7 -
> .../include/asm/arch-rockchip/sdram_rk3399.h | 65 +-
> arch/arm/mach-rockchip/rk3399/syscon_rk3399.c | 8 +
> drivers/clk/rockchip/clk_rk3399.c | 76 +-
> drivers/ram/Kconfig | 1 +
> drivers/ram/rockchip/Kconfig | 26 +
> drivers/ram/rockchip/Makefile | 3 +-
> .../ram/rockchip/sdram-rk3399-lpddr4-400.inc | 1570 ++++++++++++
> .../ram/rockchip/sdram-rk3399-lpddr4-800.inc | 1570 ++++++++++++
> drivers/ram/rockchip/sdram_debug.c | 147 ++
> drivers/ram/rockchip/sdram_rk3399.c | 2176 ++++++++++++++---
> include/debug_uart.h | 19 +
> 20 files changed, 6964 insertions(+), 415 deletions(-)
> create mode 100644 arch/arm/dts/rk3399-sdram-lpddr4-100.dtsi
> create mode 100644 arch/arm/include/asm/arch-rockchip/pmu_rk3399.h
> create mode 100644 drivers/ram/rockchip/Kconfig
> create mode 100644 drivers/ram/rockchip/sdram-rk3399-lpddr4-400.inc
> create mode 100644 drivers/ram/rockchip/sdram-rk3399-lpddr4-800.inc
> create mode 100644 drivers/ram/rockchip/sdram_debug.c
>
> --
> 2.18.0.321.gffc6fa0e3
>
More information about the U-Boot
mailing list