[U-Boot] [PATCH 84/92] ram: rk3399: Add lpddr4 set rate support
Jagan Teki
jagan at amarulasolutions.com
Tue Jun 11 14:51:27 UTC 2019
Unlike rest of dram type chips, LPDDR4 initialization start
with at board selected frequency (say 50MHz) and then it
switches into 400MHz and 800MHz simultaneously to make the
proper sequence work on each channel with associated training.
Here is sameple log about LPDDR4-100 init sequence in Rockpro64:
Channel 0: LPDDR4, 50MHz
BW=32 Col=10 Bk=8 CS0 Row=15 CS1 Row=15 CS=2 Die BW=16 Size=2048MB
Channel 1: LPDDR4, 50MHz
BW=32 Col=10 Bk=8 CS0 Row=15 CS1 Row=15 CS=2 Die BW=16 Size=2048MB
256B stride
channel 0 training pass
channel 1 training pass
change freq to 400 MHz 0, 1
channel 0 training pass
channel 1 training pass
change freq to 800 MHz 1, 0
This patch add support to this init sequence via lpddr4 set rate
by taking sdram timing parameters from 400, 800 .inc files.
Signed-off-by: Jagan Teki <jagan at amarulasolutions.com>
Signed-off-by: YouMin Chen <cym at rock-chips.com>
---
drivers/ram/rockchip/sdram_rk3399.c | 402 +++++++++++++++++++++++++++-
1 file changed, 393 insertions(+), 9 deletions(-)
diff --git a/drivers/ram/rockchip/sdram_rk3399.c b/drivers/ram/rockchip/sdram_rk3399.c
index 5a0872c23f..170743b88c 100644
--- a/drivers/ram/rockchip/sdram_rk3399.c
+++ b/drivers/ram/rockchip/sdram_rk3399.c
@@ -16,6 +16,7 @@
#include <asm/arch-rockchip/clock.h>
#include <asm/arch-rockchip/cru_rk3399.h>
#include <asm/arch-rockchip/grf_rk3399.h>
+#include <asm/arch-rockchip/pmu_rk3399.h>
#include <asm/arch-rockchip/hardware.h>
#include <asm/arch-rockchip/sdram_common.h>
#include <asm/arch-rockchip/sdram_rk3399.h>
@@ -62,6 +63,7 @@ struct dram_info {
struct clk ddr_clk;
struct rk3399_cru *cru;
struct rk3399_grf_regs *grf;
+ struct rk3399_pmu_regs *pmu;
struct rk3399_pmucru *pmucru;
struct rk3399_pmusgrf_regs *pmusgrf;
struct rk3399_ddr_cic_regs *cic;
@@ -186,6 +188,11 @@ struct io_setting {
},
};
+struct rk3399_sdram_params lpddr4_timings[] = {
+ #include "sdram-rk3399-lpddr4-400.inc"
+ #include "sdram-rk3399-lpddr4-800.inc"
+};
+
/**
* phy = 0, PHY boot freq
* phy = 1, PHY index 0
@@ -213,11 +220,30 @@ lpddr4_get_io_settings(const struct rk3399_sdram_params *params, u32 mr5)
return io;
}
+static void *get_denali_phy(const struct chan_info *chan,
+ struct rk3399_sdram_params *params, bool reg)
+{
+ return reg ? &chan->publ->denali_phy : ¶ms->phy_regs.denali_phy;
+}
+
+static void *get_denali_ctl(const struct chan_info *chan,
+ struct rk3399_sdram_params *params, bool reg)
+{
+ return reg ? &chan->pctl->denali_ctl : ¶ms->pctl_regs.denali_ctl;
+}
+
static void *get_ddrc0_con(struct dram_info *dram, u8 channel)
{
return (channel == 0) ? &dram->grf->ddrc0_con0 : &dram->grf->ddrc0_con1;
}
+static u32 lpddr4_get_phy(struct rk3399_sdram_params *params, u32 ctl)
+{
+ u32 lpddr4_phy[] = {1, 0, 0xb};
+
+ return lpddr4_phy[ctl];
+}
+
static u32 get_ddr_stride(struct rk3399_pmusgrf_regs *pmusgrf)
{
return ((readl(&pmusgrf->soc_con4) >> 10) & 0x1F);
@@ -579,10 +605,11 @@ static int phy_io_config(const struct chan_info *chan,
}
static void set_ds_odt(const struct chan_info *chan,
- const struct rk3399_sdram_params *sdram_params, u32 mr5)
+ struct rk3399_sdram_params *sdram_params,
+ bool ctl_phy_reg, u32 mr5)
{
- u32 *denali_phy = chan->publ->denali_phy;
- u32 *denali_ctl = chan->pctl->denali_ctl;
+ u32 *denali_phy = get_denali_phy(chan, sdram_params, ctl_phy_reg);
+ u32 *denali_ctl = get_denali_ctl(chan, sdram_params, ctl_phy_reg);
u32 tsel_idle_en, tsel_wr_en, tsel_rd_en;
u32 tsel_idle_select_p, tsel_rd_select_p;
u32 tsel_idle_select_n, tsel_rd_select_n;
@@ -740,7 +767,8 @@ static void set_ds_odt(const struct chan_info *chan,
clrsetbits_le32(&denali_phy[928], 0xff, reg_value);
/* phy_pad_rst_drive 8bits DENALI_PHY_937 offset_0 */
- clrsetbits_le32(&denali_phy[937], 0xff, reg_value);
+ if (!ctl_phy_reg)
+ clrsetbits_le32(&denali_phy[937], 0xff, reg_value);
/* phy_pad_cke_drive 8bits DENALI_PHY_935 offset_0 */
clrsetbits_le32(&denali_phy[935], 0xff, reg_value);
@@ -930,7 +958,7 @@ static int pctl_cfg(struct dram_info *dram, const struct chan_info *chan,
copy_to_reg(&denali_phy[512], ¶ms_phy[512], (549 - 512 + 1) * 4);
copy_to_reg(&denali_phy[640], ¶ms_phy[640], (677 - 640 + 1) * 4);
copy_to_reg(&denali_phy[768], ¶ms_phy[768], (805 - 768 + 1) * 4);
- set_ds_odt(chan, sdram_params, 0);
+ set_ds_odt(chan, sdram_params, true, 0);
/*
* phy_dqs_tsel_wr_timing_X 8bits DENALI_PHY_84/212/340/468 offset_8
@@ -1317,7 +1345,7 @@ static int data_training(const struct chan_info *chan, u32 channel,
if (training_flag == PI_FULL_TRAINING) {
if (sdram_params->base.dramtype == LPDDR4) {
- training_flag = PI_CA_TRAINING | PI_WRITE_LEVELING |
+ training_flag = PI_WRITE_LEVELING |
PI_READ_GATE_TRAINING |
PI_READ_LEVELING | PI_WDQ_LEVELING;
} else if (sdram_params->base.dramtype == LPDDR3) {
@@ -1812,6 +1840,357 @@ end:
return ret;
}
+static void lpddr4_copy_phy(struct dram_info *dram,
+ struct rk3399_sdram_params *params, u32 phy,
+ struct rk3399_sdram_params *timings,
+ u32 channel)
+{
+ u32 *denali_phy;
+ u32 *denali_phy_params;
+ u32 speed = 0;
+ u32 mr5;
+
+ denali_phy = dram->chan[channel].publ->denali_phy;
+ denali_phy_params = timings->phy_regs.denali_phy;
+
+ /* switch index */
+ clrsetbits_le32(&denali_phy_params[896], 0x3 << 8, phy << 8);
+ writel(denali_phy_params[896], &denali_phy[896]);
+
+ /* phy_pll_ctrl_ca, phy_pll_ctrl */
+ writel(denali_phy_params[911], &denali_phy[911]);
+
+ /* phy_low_freq_sel */
+ clrsetbits_le32(&denali_phy[913], 0x1,
+ denali_phy_params[913] & 0x1);
+
+ /* PHY_GRP_SLAVE_DELAY_X, phy_cslvl_dly_step */
+ writel(denali_phy_params[916], &denali_phy[916]);
+ writel(denali_phy_params[917], &denali_phy[917]);
+ writel(denali_phy_params[918], &denali_phy[918]);
+
+ /* phy_adrZ_sw_wraddr_shift_X */
+ writel(denali_phy_params[512], &denali_phy[512]);
+ clrsetbits_le32(&denali_phy[513], 0xFFFF,
+ denali_phy_params[513] & 0xFFFF);
+ writel(denali_phy_params[640], &denali_phy[640]);
+ clrsetbits_le32(&denali_phy[641], 0xFFFF,
+ denali_phy_params[641] & 0xFFFF);
+ writel(denali_phy_params[768], &denali_phy[768]);
+ clrsetbits_le32(&denali_phy[769], 0xFFFF,
+ denali_phy_params[769] & 0xFFFF);
+
+ writel(denali_phy_params[544], &denali_phy[544]);
+ writel(denali_phy_params[545], &denali_phy[545]);
+ writel(denali_phy_params[546], &denali_phy[546]);
+ writel(denali_phy_params[547], &denali_phy[547]);
+
+ writel(denali_phy_params[672], &denali_phy[672]);
+ writel(denali_phy_params[673], &denali_phy[673]);
+ writel(denali_phy_params[674], &denali_phy[674]);
+ writel(denali_phy_params[675], &denali_phy[675]);
+
+ writel(denali_phy_params[800], &denali_phy[800]);
+ writel(denali_phy_params[801], &denali_phy[801]);
+ writel(denali_phy_params[802], &denali_phy[802]);
+ writel(denali_phy_params[803], &denali_phy[803]);
+
+ /*
+ * phy_adr_master_delay_start_X
+ * phy_adr_master_delay_step_X
+ * phy_adr_master_delay_wait_X
+ */
+ writel(denali_phy_params[548], &denali_phy[548]);
+ writel(denali_phy_params[676], &denali_phy[676]);
+ writel(denali_phy_params[804], &denali_phy[804]);
+
+ /* phy_adr_calvl_dly_step_X */
+ writel(denali_phy_params[549], &denali_phy[549]);
+ writel(denali_phy_params[677], &denali_phy[677]);
+ writel(denali_phy_params[805], &denali_phy[805]);
+
+ /*
+ * phy_clk_wrdm_slave_delay_X
+ * phy_clk_wrdqZ_slave_delay_X
+ * phy_clk_wrdqs_slave_delay_X
+ */
+ copy_to_reg((u32 *)&denali_phy[59], (u32 *)&denali_phy_params[59],
+ (63 - 58) * 4);
+ copy_to_reg((u32 *)&denali_phy[187], (u32 *)&denali_phy_params[187],
+ (191 - 186) * 4);
+ copy_to_reg((u32 *)&denali_phy[315], (u32 *)&denali_phy_params[315],
+ (319 - 314) * 4);
+ copy_to_reg((u32 *)&denali_phy[443], (u32 *)&denali_phy_params[443],
+ (447 - 442) * 4);
+
+ /*
+ * phy_dqs_tsel_wr_timing_X 8bits DENALI_PHY_84/212/340/468 offset_8
+ * dqs_tsel_wr_end[7:4] add Half cycle
+ * phy_dq_tsel_wr_timing_X 8bits DENALI_PHY_83/211/339/467 offset_8
+ * dq_tsel_wr_end[7:4] add Half cycle
+ */
+ writel(denali_phy_params[83] + (0x10 << 16), &denali_phy[83]);
+ writel(denali_phy_params[84] + (0x10 << 8), &denali_phy[84]);
+ writel(denali_phy_params[85], &denali_phy[85]);
+
+ writel(denali_phy_params[211] + (0x10 << 16), &denali_phy[211]);
+ writel(denali_phy_params[212] + (0x10 << 8), &denali_phy[212]);
+ writel(denali_phy_params[213], &denali_phy[213]);
+
+ writel(denali_phy_params[339] + (0x10 << 16), &denali_phy[339]);
+ writel(denali_phy_params[340] + (0x10 << 8), &denali_phy[340]);
+ writel(denali_phy_params[341], &denali_phy[341]);
+
+ writel(denali_phy_params[467] + (0x10 << 16), &denali_phy[467]);
+ writel(denali_phy_params[468] + (0x10 << 8), &denali_phy[468]);
+ writel(denali_phy_params[469], &denali_phy[469]);
+
+ /*
+ * phy_gtlvl_resp_wait_cnt_X
+ * phy_gtlvl_dly_step_X
+ * phy_wrlvl_resp_wait_cnt_X
+ * phy_gtlvl_final_step_X
+ * phy_gtlvl_back_step_X
+ * phy_rdlvl_dly_step_X
+ *
+ * phy_master_delay_step_X
+ * phy_master_delay_wait_X
+ * phy_wrlvl_dly_step_X
+ * phy_rptr_update_X
+ * phy_wdqlvl_dly_step_X
+ */
+ writel(denali_phy_params[87], &denali_phy[87]);
+ writel(denali_phy_params[88], &denali_phy[88]);
+ writel(denali_phy_params[89], &denali_phy[89]);
+ writel(denali_phy_params[90], &denali_phy[90]);
+
+ writel(denali_phy_params[215], &denali_phy[215]);
+ writel(denali_phy_params[216], &denali_phy[216]);
+ writel(denali_phy_params[217], &denali_phy[217]);
+ writel(denali_phy_params[218], &denali_phy[218]);
+
+ writel(denali_phy_params[343], &denali_phy[343]);
+ writel(denali_phy_params[344], &denali_phy[344]);
+ writel(denali_phy_params[345], &denali_phy[345]);
+ writel(denali_phy_params[346], &denali_phy[346]);
+
+ writel(denali_phy_params[471], &denali_phy[471]);
+ writel(denali_phy_params[472], &denali_phy[472]);
+ writel(denali_phy_params[473], &denali_phy[473]);
+ writel(denali_phy_params[474], &denali_phy[474]);
+
+ /*
+ * phy_gtlvl_lat_adj_start_X
+ * phy_gtlvl_rddqs_slv_dly_start_X
+ * phy_rdlvl_rddqs_dq_slv_dly_start_X
+ * phy_wdqlvl_dqdm_slv_dly_start_X
+ */
+ writel(denali_phy_params[80], &denali_phy[80]);
+ writel(denali_phy_params[81], &denali_phy[81]);
+
+ writel(denali_phy_params[208], &denali_phy[208]);
+ writel(denali_phy_params[209], &denali_phy[209]);
+
+ writel(denali_phy_params[336], &denali_phy[336]);
+ writel(denali_phy_params[337], &denali_phy[337]);
+
+ writel(denali_phy_params[464], &denali_phy[464]);
+ writel(denali_phy_params[465], &denali_phy[465]);
+
+ /*
+ * phy_master_delay_start_X
+ * phy_sw_master_mode_X
+ * phy_rddata_en_tsel_dly_X
+ */
+ writel(denali_phy_params[86], &denali_phy[86]);
+ writel(denali_phy_params[214], &denali_phy[214]);
+ writel(denali_phy_params[342], &denali_phy[342]);
+ writel(denali_phy_params[470], &denali_phy[470]);
+
+ /*
+ * phy_rddqZ_slave_delay_X
+ * phy_rddqs_dqZ_fall_slave_delay_X
+ * phy_rddqs_dqZ_rise_slave_delay_X
+ * phy_rddqs_dm_fall_slave_delay_X
+ * phy_rddqs_dm_rise_slave_delay_X
+ * phy_rddqs_gate_slave_delay_X
+ * phy_wrlvl_delay_early_threshold_X
+ * phy_write_path_lat_add_X
+ * phy_rddqs_latency_adjust_X
+ * phy_wrlvl_delay_period_threshold_X
+ * phy_wrlvl_early_force_zero_X
+ */
+ copy_to_reg((u32 *)&denali_phy[64], (u32 *)&denali_phy_params[64],
+ (67 - 63) * 4);
+ clrsetbits_le32(&denali_phy[68], 0xFFFFFC00,
+ denali_phy_params[68] & 0xFFFFFC00);
+ copy_to_reg((u32 *)&denali_phy[69], (u32 *)&denali_phy_params[69],
+ (79 - 68) * 4);
+ copy_to_reg((u32 *)&denali_phy[192], (u32 *)&denali_phy_params[192],
+ (195 - 191) * 4);
+ clrsetbits_le32(&denali_phy[196], 0xFFFFFC00,
+ denali_phy_params[196] & 0xFFFFFC00);
+ copy_to_reg((u32 *)&denali_phy[197], (u32 *)&denali_phy_params[197],
+ (207 - 196) * 4);
+ copy_to_reg((u32 *)&denali_phy[320], (u32 *)&denali_phy_params[320],
+ (323 - 319) * 4);
+ clrsetbits_le32(&denali_phy[324], 0xFFFFFC00,
+ denali_phy_params[324] & 0xFFFFFC00);
+ copy_to_reg((u32 *)&denali_phy[325], (u32 *)&denali_phy_params[325],
+ (335 - 324) * 4);
+
+ copy_to_reg((u32 *)&denali_phy[448], (u32 *)&denali_phy_params[448],
+ (451 - 447) * 4);
+ clrsetbits_le32(&denali_phy[452], 0xFFFFFC00,
+ denali_phy_params[452] & 0xFFFFFC00);
+ copy_to_reg((u32 *)&denali_phy[453], (u32 *)&denali_phy_params[453],
+ (463 - 452) * 4);
+
+ /* phy_two_cyc_preamble_X */
+ clrsetbits_le32(&denali_phy[7], 0x3 << 24,
+ denali_phy_params[7] & (0x3 << 24));
+ clrsetbits_le32(&denali_phy[135], 0x3 << 24,
+ denali_phy_params[135] & (0x3 << 24));
+ clrsetbits_le32(&denali_phy[263], 0x3 << 24,
+ denali_phy_params[263] & (0x3 << 24));
+ clrsetbits_le32(&denali_phy[391], 0x3 << 24,
+ denali_phy_params[391] & (0x3 << 24));
+
+ /* speed */
+ if (timings->base.ddr_freq < 400 * MHz)
+ speed = 0x0;
+ else if (timings->base.ddr_freq < 800 * MHz)
+ speed = 0x1;
+ else if (timings->base.ddr_freq < 1200 * MHz)
+ speed = 0x2;
+
+ /* PHY_924 PHY_PAD_FDBK_DRIVE */
+ clrsetbits_le32(&denali_phy[924], 0x3 << 21, speed << 21);
+ /* PHY_926 PHY_PAD_DATA_DRIVE */
+ clrsetbits_le32(&denali_phy[926], 0x3 << 9, speed << 9);
+ /* PHY_927 PHY_PAD_DQS_DRIVE */
+ clrsetbits_le32(&denali_phy[927], 0x3 << 9, speed << 9);
+ /* PHY_928 PHY_PAD_ADDR_DRIVE */
+ clrsetbits_le32(&denali_phy[928], 0x3 << 17, speed << 17);
+ /* PHY_929 PHY_PAD_CLK_DRIVE */
+ clrsetbits_le32(&denali_phy[929], 0x3 << 17, speed << 17);
+ /* PHY_935 PHY_PAD_CKE_DRIVE */
+ clrsetbits_le32(&denali_phy[935], 0x3 << 17, speed << 17);
+ /* PHY_937 PHY_PAD_RST_DRIVE */
+ clrsetbits_le32(&denali_phy[937], 0x3 << 17, speed << 17);
+ /* PHY_939 PHY_PAD_CS_DRIVE */
+ clrsetbits_le32(&denali_phy[939], 0x3 << 17, speed << 17);
+
+ read_mr(dram->chan[channel].pctl, 1, 5, &mr5);
+ set_ds_odt(&dram->chan[channel], timings, true, mr5);
+
+ /*
+ * if phy_sw_master_mode_X not bypass mode,
+ * clear PHY_SLICE_PWR_RDC_DISABLE.
+ * NOTE: need use timings, not ddr_publ_regs
+ */
+ if (!((denali_phy_params[86] >> 8) & (1 << 2))) {
+ clrbits_le32(&denali_phy[10], 1 << 16);
+ clrbits_le32(&denali_phy[138], 1 << 16);
+ clrbits_le32(&denali_phy[266], 1 << 16);
+ clrbits_le32(&denali_phy[394], 1 << 16);
+ }
+}
+
+static void lpddr4_set_phy(struct dram_info *dram,
+ struct rk3399_sdram_params *params, u32 phy,
+ struct rk3399_sdram_params *timings)
+{
+ u32 channel;
+
+ for (channel = 0; channel < 2; channel++)
+ lpddr4_copy_phy(dram, params, phy, timings, channel);
+}
+
+static int lpddr4_set_ctl(struct dram_info *dram,
+ struct rk3399_sdram_params *params, u32 ctl, u32 hz)
+{
+ u32 channel;
+ int ret_clk, ret[2];
+
+ /* cci idle req stall */
+ writel(0x70007, &dram->grf->soc_con0);
+
+ /* enable all clk */
+ setbits_le32(&dram->pmu->pmu_noc_auto_ena, (0x3 << 7));
+
+ /* idle */
+ setbits_le32(&dram->pmu->pmu_bus_idle_req, (0x3 << 18));
+ while ((readl(&dram->pmu->pmu_bus_idle_st) & (0x3 << 18))
+ != (0x3 << 18))
+ ;
+
+ /* change freq */
+ writel((((0x3 << 4) | (1 << 2) | 1) << 16) |
+ (ctl << 4) | (1 << 2) | 1, &dram->cic->cic_ctrl0);
+ while (!(readl(&dram->cic->cic_status0) & (1 << 2)))
+ ;
+
+ ret_clk = clk_set_rate(&dram->ddr_clk, hz);
+ if (ret_clk < 0) {
+ printf("%s clk set failed %d\n", __func__, ret_clk);
+ return ret_clk;
+ }
+
+ writel(0x20002, &dram->cic->cic_ctrl0);
+ while (!(readl(&dram->cic->cic_status0) & (1 << 0)))
+ ;
+
+ /* deidle */
+ clrbits_le32(&dram->pmu->pmu_bus_idle_req, (0x3 << 18));
+ while (readl(&dram->pmu->pmu_bus_idle_st) & (0x3 << 18))
+ ;
+
+ /* clear enable all clk */
+ clrbits_le32(&dram->pmu->pmu_noc_auto_ena, (0x3 << 7));
+
+ /* LPDDR4 ctl2 can not do training, all training will fail */
+ if (!(params->base.dramtype == LPDDR4 && ctl == 2)) {
+ for (channel = 0; channel < 2; channel++) {
+ if (!(params->ch[channel].cap_info.col))
+ continue;
+ ret[channel] = data_training(&dram->chan[channel],
+ channel, params,
+ PI_FULL_TRAINING);
+ }
+ for (channel = 0; channel < 2; channel++) {
+ if (!(params->ch[channel].cap_info.col))
+ continue;
+ if (ret[channel])
+ printf("%s: channel %d training failed!\n",
+ __func__, channel);
+ else
+ debug("%s: channel %d training pass\n",
+ __func__, channel);
+ }
+ }
+
+ return 0;
+}
+
+static void lpddr4_set_rate(struct dram_info *dram,
+ struct rk3399_sdram_params *params)
+{
+ u32 ctl;
+ u32 phy;
+
+ for (ctl = 0; ctl < 2; ctl++) {
+ phy = lpddr4_get_phy(params, ctl);
+
+ lpddr4_set_phy(dram, params, phy, &lpddr4_timings[ctl]);
+ lpddr4_set_ctl(dram, params, ctl,
+ lpddr4_timings[ctl].base.ddr_freq);
+
+ debug("%s: change freq to %d MHz %d, %d\n", __func__,
+ lpddr4_timings[ctl].base.ddr_freq / MHz, ctl, phy);
+ }
+}
+
static void clear_channel_params(struct rk3399_sdram_params *params, u8 channel)
{
params->ch[channel].cap_info.rank = 0;
@@ -1943,7 +2322,11 @@ static int sdram_init(struct dram_info *dram,
sdram_params->base.stride = calculate_stride(sdram_params);
dram_all_config(dram, sdram_params);
- switch_to_phy_index1(dram, sdram_params);
+
+ if (sdram_params->base.dramtype == LPDDR4)
+ lpddr4_set_rate(dram, sdram_params);
+ else
+ switch_to_phy_index1(dram, sdram_params);
debug("Finish SDRAM initialization...\n");
return 0;
@@ -2007,6 +2390,7 @@ static int rk3399_dmc_init(struct udevice *dev)
priv->cic = syscon_get_first_range(ROCKCHIP_SYSCON_CIC);
priv->grf = syscon_get_first_range(ROCKCHIP_SYSCON_GRF);
+ priv->pmu = syscon_get_first_range(ROCKCHIP_SYSCON_PMU);
priv->pmugrf = syscon_get_first_range(ROCKCHIP_SYSCON_PMUGRF);
priv->pmusgrf = syscon_get_first_range(ROCKCHIP_SYSCON_PMUSGRF);
priv->pmucru = rockchip_get_pmucru();
@@ -2025,8 +2409,8 @@ static int rk3399_dmc_init(struct udevice *dev)
priv->chan[0].publ, priv->chan[0].msch,
priv->chan[1].pctl, priv->chan[1].pi,
priv->chan[1].publ, priv->chan[1].msch);
- debug("cru %p, cic %p, grf %p, sgrf %p, pmucru %p\n", priv->cru,
- priv->cic, priv->pmugrf, priv->pmusgrf, priv->pmucru);
+ debug("cru %p, cic %p, grf %p, sgrf %p, pmucru %p, pmu %p\n", priv->cru,
+ priv->cic, priv->pmugrf, priv->pmusgrf, priv->pmucru, priv->pmu);
#if CONFIG_IS_ENABLED(OF_PLATDATA)
ret = clk_get_by_index_platdata(dev, 0, dtplat->clocks, &priv->ddr_clk);
#else
--
2.18.0.321.gffc6fa0e3
More information about the U-Boot
mailing list