[U-Boot] [PATCH 53/92] clk: rockchip: rk3399: Fix check patch warnings and checks
Jagan Teki
jagan at amarulasolutions.com
Tue Jun 11 14:50:56 UTC 2019
- CHECK: spaces preferred around that '*'
- CHECK: spaces preferred around that '/'
- CHECK: space preferred before that '|'
- WARNING: macros should not use a trailing semicolon
- CHECK: Unnecessary parentheses around 'fbdiv <= min_fbdiv'
- CHECK: Unnecessary parentheses around 'parent->id == SCLK_MAC'
- CHECK: Unnecessary parentheses around 'parent->dev == clk->dev'
- WARNING: line over 80 characters
- CHECK: Prefer kernel type 'u8' over 'uint8_t'
- Add proper macro definitions arrangements
Note: there are still line over 80 characters and other warnings but
fixing those making code look unreadable, so I kept it as it is.
Signed-off-by: Jagan Teki <jagan at amarulasolutions.com>
---
drivers/clk/rockchip/clk_rk3399.c | 68 ++++++++++++++-----------------
1 file changed, 31 insertions(+), 37 deletions(-)
diff --git a/drivers/clk/rockchip/clk_rk3399.c b/drivers/clk/rockchip/clk_rk3399.c
index aa6a8ad1c9..5d1ad94e85 100644
--- a/drivers/clk/rockchip/clk_rk3399.c
+++ b/drivers/clk/rockchip/clk_rk3399.c
@@ -38,8 +38,8 @@ struct pll_div {
};
#define RATE_TO_DIV(input_rate, output_rate) \
- ((input_rate) / (output_rate) - 1);
-#define DIV_TO_RATE(input_rate, div) ((input_rate) / ((div) + 1))
+ ((input_rate) / (output_rate) - 1)
+#define DIV_TO_RATE(input_rate, div) ((input_rate) / ((div) + 1))
#define PLL_DIVISORS(hz, _refdiv, _postdiv1, _postdiv2) {\
.refdiv = _refdiv,\
@@ -53,15 +53,15 @@ static const struct pll_div cpll_init_cfg = PLL_DIVISORS(CPLL_HZ, 1, 2, 2);
static const struct pll_div ppll_init_cfg = PLL_DIVISORS(PPLL_HZ, 2, 2, 1);
#endif
-static const struct pll_div apll_l_1600_cfg = PLL_DIVISORS(1600*MHz, 3, 1, 1);
-static const struct pll_div apll_l_600_cfg = PLL_DIVISORS(600*MHz, 1, 2, 1);
+static const struct pll_div apll_l_1600_cfg = PLL_DIVISORS(1600 * MHz, 3, 1, 1);
+static const struct pll_div apll_l_600_cfg = PLL_DIVISORS(600 * MHz, 1, 2, 1);
static const struct pll_div *apll_l_cfgs[] = {
[APLL_L_1600_MHZ] = &apll_l_1600_cfg,
[APLL_L_600_MHZ] = &apll_l_600_cfg,
};
-static const struct pll_div apll_b_600_cfg = PLL_DIVISORS(600*MHz, 1, 2, 1);
+static const struct pll_div apll_b_600_cfg = PLL_DIVISORS(600 * MHz, 1, 2, 1);
static const struct pll_div *apll_b_cfgs[] = {
[APLL_B_600_MHZ] = &apll_b_600_cfg,
};
@@ -393,7 +393,7 @@ static int pll_para_config(u32 freq_hz, struct pll_div *div)
fref_khz = ref_khz / refdiv;
fbdiv = vco_khz / fref_khz;
- if ((fbdiv >= max_fbdiv) || (fbdiv <= min_fbdiv))
+ if (fbdiv >= max_fbdiv || fbdiv <= min_fbdiv)
continue;
diff_khz = vco_khz - fbdiv * fref_khz;
if (fbdiv + 1 < max_fbdiv && diff_khz > fref_khz / 2) {
@@ -409,7 +409,7 @@ static int pll_para_config(u32 freq_hz, struct pll_div *div)
div->fbdiv = fbdiv;
}
- if (best_diff_khz > 4 * (MHz/KHz)) {
+ if (best_diff_khz > 4 * (MHz / KHz)) {
printf("%s: Failed to match output frequency %u, "
"difference is %u Hz,exceed 4MHZ\n", __func__, freq_hz,
best_diff_khz * KHz);
@@ -489,28 +489,21 @@ void rk3399_configure_cpu_b(struct rk3399_cru *cru,
}
#define I2C_CLK_REG_MASK(bus) \
- (I2C_DIV_CON_MASK << \
- CLK_I2C ##bus## _DIV_CON_SHIFT | \
- CLK_I2C_PLL_SEL_MASK << \
- CLK_I2C ##bus## _PLL_SEL_SHIFT)
+ (I2C_DIV_CON_MASK << CLK_I2C ##bus## _DIV_CON_SHIFT | \
+ CLK_I2C_PLL_SEL_MASK << CLK_I2C ##bus## _PLL_SEL_SHIFT)
#define I2C_CLK_REG_VALUE(bus, clk_div) \
- ((clk_div - 1) << \
- CLK_I2C ##bus## _DIV_CON_SHIFT | \
- CLK_I2C_PLL_SEL_GPLL << \
- CLK_I2C ##bus## _PLL_SEL_SHIFT)
+ ((clk_div - 1) << CLK_I2C ##bus## _DIV_CON_SHIFT | \
+ CLK_I2C_PLL_SEL_GPLL << CLK_I2C ##bus## _PLL_SEL_SHIFT)
#define I2C_CLK_DIV_VALUE(con, bus) \
- (con >> CLK_I2C ##bus## _DIV_CON_SHIFT) & \
- I2C_DIV_CON_MASK;
+ ((con >> CLK_I2C ##bus## _DIV_CON_SHIFT) & I2C_DIV_CON_MASK)
#define I2C_PMUCLK_REG_MASK(bus) \
- (I2C_DIV_CON_MASK << \
- CLK_I2C ##bus## _DIV_CON_SHIFT)
+ (I2C_DIV_CON_MASK << CLK_I2C ##bus## _DIV_CON_SHIFT)
#define I2C_PMUCLK_REG_VALUE(bus, clk_div) \
- ((clk_div - 1) << \
- CLK_I2C ##bus## _DIV_CON_SHIFT)
+ ((clk_div - 1) << CLK_I2C ##bus## _DIV_CON_SHIFT)
static ulong rk3399_i2c_get_clk(struct rk3399_cru *cru, ulong clk_id)
{
@@ -597,9 +590,9 @@ static ulong rk3399_i2c_set_clk(struct rk3399_cru *cru, ulong clk_id, uint hz)
*/
struct spi_clkreg {
- uint8_t reg; /* CLKSEL_CON[reg] register in CRU */
- uint8_t div_shift;
- uint8_t sel_shift;
+ u8 reg; /* CLKSEL_CON[reg] register in CRU */
+ u8 div_shift;
+ u8 sel_shift;
};
/*
@@ -678,7 +671,7 @@ static ulong rk3399_spi_set_clk(struct rk3399_cru *cru, ulong clk_id, uint hz)
static ulong rk3399_vop_set_clk(struct rk3399_cru *cru, ulong clk_id, u32 hz)
{
struct pll_div vpll_config = {0};
- int aclk_vop = 198*MHz;
+ int aclk_vop = 198 * MHz;
void *aclkreg_addr, *dclkreg_addr;
u32 div;
@@ -710,7 +703,7 @@ static ulong rk3399_vop_set_clk(struct rk3399_cru *cru, ulong clk_id, u32 hz)
rkclk_set_pll(&cru->vpll_con[0], &vpll_config);
rk_clrsetreg(dclkreg_addr,
- DCLK_VOP_DCLK_SEL_MASK | DCLK_VOP_PLL_SEL_MASK|
+ DCLK_VOP_DCLK_SEL_MASK | DCLK_VOP_PLL_SEL_MASK |
DCLK_VOP_DIV_CON_MASK,
DCLK_VOP_DCLK_SEL_DIVOUT << DCLK_VOP_DCLK_SEL_SHIFT |
DCLK_VOP_PLL_SEL_VPLL << DCLK_VOP_PLL_SEL_SHIFT |
@@ -750,7 +743,7 @@ static ulong rk3399_mmc_set_clk(struct rk3399_cru *cru,
ulong clk_id, ulong set_rate)
{
int src_clk_div;
- int aclk_emmc = 198*MHz;
+ int aclk_emmc = 198 * MHz;
switch (clk_id) {
case HCLK_SDMMC:
@@ -776,7 +769,7 @@ static ulong rk3399_mmc_set_clk(struct rk3399_cru *cru,
break;
case SCLK_EMMC:
/* Select aclk_emmc source from GPLL */
- src_clk_div = DIV_ROUND_UP(GPLL_HZ , aclk_emmc);
+ src_clk_div = DIV_ROUND_UP(GPLL_HZ, aclk_emmc);
assert(src_clk_div - 1 < 32);
rk_clrsetreg(&cru->clksel_con[21],
@@ -834,23 +827,23 @@ static ulong rk3399_ddr_set_clk(struct rk3399_cru *cru,
/* clk_ddrc == DPLL = 24MHz / refdiv * fbdiv / postdiv1 / postdiv2 */
switch (set_rate) {
- case 200*MHz:
+ case 200 * MHz:
dpll_cfg = (struct pll_div)
{.refdiv = 1, .fbdiv = 50, .postdiv1 = 6, .postdiv2 = 1};
break;
- case 300*MHz:
+ case 300 * MHz:
dpll_cfg = (struct pll_div)
{.refdiv = 2, .fbdiv = 100, .postdiv1 = 4, .postdiv2 = 1};
break;
- case 666*MHz:
+ case 666 * MHz:
dpll_cfg = (struct pll_div)
{.refdiv = 2, .fbdiv = 111, .postdiv1 = 2, .postdiv2 = 1};
break;
- case 800*MHz:
+ case 800 * MHz:
dpll_cfg = (struct pll_div)
{.refdiv = 1, .fbdiv = 100, .postdiv1 = 3, .postdiv2 = 1};
break;
- case 933*MHz:
+ case 933 * MHz:
dpll_cfg = (struct pll_div)
{.refdiv = 1, .fbdiv = 116, .postdiv1 = 3, .postdiv2 = 1};
break;
@@ -916,7 +909,6 @@ static ulong rk3399_clk_get_rate(struct clk *clk)
case SCLK_UART2:
case SCLK_UART3:
return 24000000;
- break;
case PCLK_HDMI_CTRL:
break;
case DCLK_VOP0:
@@ -1014,7 +1006,8 @@ static ulong rk3399_clk_set_rate(struct clk *clk, ulong rate)
return ret;
}
-static int __maybe_unused rk3399_gmac_set_parent(struct clk *clk, struct clk *parent)
+static int __maybe_unused rk3399_gmac_set_parent(struct clk *clk,
+ struct clk *parent)
{
struct rk3399_clk_priv *priv = dev_get_priv(clk->dev);
const char *clock_output_name;
@@ -1024,7 +1017,7 @@ static int __maybe_unused rk3399_gmac_set_parent(struct clk *clk, struct clk *pa
* If the requested parent is in the same clock-controller and
* the id is SCLK_MAC ("clk_gmac"), switch to the internal clock.
*/
- if ((parent->dev == clk->dev) && (parent->id == SCLK_MAC)) {
+ if (parent->dev == clk->dev && parent->id == SCLK_MAC) {
debug("%s: switching RGMII to SCLK_MAC\n", __func__);
rk_clrreg(&priv->cru->clksel_con[19], BIT(4));
return 0;
@@ -1049,7 +1042,8 @@ static int __maybe_unused rk3399_gmac_set_parent(struct clk *clk, struct clk *pa
return -EINVAL;
}
-static int __maybe_unused rk3399_clk_set_parent(struct clk *clk, struct clk *parent)
+static int __maybe_unused rk3399_clk_set_parent(struct clk *clk,
+ struct clk *parent)
{
switch (clk->id) {
case SCLK_RMII_SRC:
--
2.18.0.321.gffc6fa0e3
More information about the U-Boot
mailing list