[U-Boot] [PATCH 3/5] configs: ls2088a: enable DM support for rtc

Chuanhua Han chuanhua.han at nxp.com
Wed Jun 12 02:27:26 UTC 2019


Enable related configs to support rtc DM feature for
ls2088ardb board.

Signed-off-by: Chuanhua Han <chuanhua.han at nxp.com>
---
depends on: 
	- http://patchwork.ozlabs.org/project/uboot/list/?series=109459
	- http://patchwork.ozlabs.org/project/uboot/list/?series=113103

 configs/ls2088ardb_tfa_SECURE_BOOT_defconfig | 7 ++++++-
 configs/ls2088ardb_tfa_defconfig             | 7 ++++++-
 2 files changed, 12 insertions(+), 2 deletions(-)

diff --git a/configs/ls2088ardb_tfa_SECURE_BOOT_defconfig b/configs/ls2088ardb_tfa_SECURE_BOOT_defconfig
index d3312c60fd..abc608ff3e 100644
--- a/configs/ls2088ardb_tfa_SECURE_BOOT_defconfig
+++ b/configs/ls2088ardb_tfa_SECURE_BOOT_defconfig
@@ -1,5 +1,6 @@
 CONFIG_ARM=y
 CONFIG_TARGET_LS2080ARDB=y
+CONFIG_SYS_MALLOC_F_LEN=0x6000
 CONFIG_SYS_TEXT_BASE=0x82000000
 CONFIG_SECURE_BOOT=y
 CONFIG_QSPI_AHB_INIT=y
@@ -8,7 +9,6 @@ CONFIG_NR_DRAM_BANKS=3
 CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT=y
 CONFIG_SEC_FIRMWARE_ARMV8_PSCI=y
 CONFIG_AHCI=y
-# CONFIG_SYS_MALLOC_F is not set
 CONFIG_FIT_VERBOSE=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_OF_STDOUT_VIA_ALIAS=y
@@ -69,3 +69,8 @@ CONFIG_RSA=y
 CONFIG_SPL_RSA=y
 CONFIG_RSA_SOFTWARE_EXP=y
 CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
+CONFIG_DM_I2C=y
+CONFIG_DM_GPIO=y
+CONFIG_I2C_MUX=y
+CONFIG_I2C_MUX_PCA954x=y
+CONFIG_DM_RTC=y
diff --git a/configs/ls2088ardb_tfa_defconfig b/configs/ls2088ardb_tfa_defconfig
index 1aa8dd9a59..c273a75305 100644
--- a/configs/ls2088ardb_tfa_defconfig
+++ b/configs/ls2088ardb_tfa_defconfig
@@ -1,5 +1,6 @@
 CONFIG_ARM=y
 CONFIG_TARGET_LS2080ARDB=y
+CONFIG_SYS_MALLOC_F_LEN=0x6000
 CONFIG_SYS_TEXT_BASE=0x82000000
 CONFIG_QSPI_AHB_INIT=y
 CONFIG_TFABOOT=y
@@ -7,7 +8,6 @@ CONFIG_NR_DRAM_BANKS=3
 CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT=y
 CONFIG_SEC_FIRMWARE_ARMV8_PSCI=y
 CONFIG_AHCI=y
-# CONFIG_SYS_MALLOC_F is not set
 CONFIG_FIT_VERBOSE=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_OF_STDOUT_VIA_ALIAS=y
@@ -70,3 +70,8 @@ CONFIG_DM_USB=y
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
 CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
+CONFIG_DM_I2C=y
+CONFIG_DM_GPIO=y
+CONFIG_I2C_MUX=y
+CONFIG_I2C_MUX_PCA954x=y
+CONFIG_DM_RTC=y
-- 
2.17.1



More information about the U-Boot mailing list