[U-Boot] [PATCH 2/2] regulator: Allow enabling GPIO regulator

Sven Schwermer sven.schwermer at disruptive-technologies.com
Wed Jun 12 08:26:17 UTC 2019


Drivers need to be able to enable regulators that may be implemented as
GPIO regulators. Example: fsl_esdhc enables the vqmmc supply which is
commonly implemented as a GPIO regulator in order to switch between I/O
voltage levels.

Signed-off-by: Sven Schwermer <sven.schwermer at disruptive-technologies.com>
---
 drivers/power/regulator/Kconfig          |  2 ++
 drivers/power/regulator/gpio-regulator.c | 18 +++++++++++++++++-
 2 files changed, 19 insertions(+), 1 deletion(-)

diff --git a/drivers/power/regulator/Kconfig b/drivers/power/regulator/Kconfig
index e0b8398ef4..bb10d20545 100644
--- a/drivers/power/regulator/Kconfig
+++ b/drivers/power/regulator/Kconfig
@@ -120,6 +120,7 @@ config SPL_DM_REGULATOR_FIXED
 config DM_REGULATOR_GPIO
 	bool "Enable Driver Model for GPIO REGULATOR"
 	depends on DM_REGULATOR && DM_GPIO
+	select DM_REGULATOR_COMMON
 	---help---
 	This config enables implementation of driver-model regulator uclass
 	features for gpio regulators. The driver implements get/set for
@@ -128,6 +129,7 @@ config DM_REGULATOR_GPIO
 config SPL_DM_REGULATOR_GPIO
 	bool "Enable Driver Model for GPIO REGULATOR in SPL"
 	depends on DM_REGULATOR_GPIO && SPL_GPIO_SUPPORT
+	select SPL_DM_REGULATOR_COMMON
 	---help---
 	This config enables implementation of driver-model regulator uclass
 	features for gpio regulators in SPL.
diff --git a/drivers/power/regulator/gpio-regulator.c b/drivers/power/regulator/gpio-regulator.c
index d18e5d8d2c..617a553a5d 100644
--- a/drivers/power/regulator/gpio-regulator.c
+++ b/drivers/power/regulator/gpio-regulator.c
@@ -4,6 +4,7 @@
  * Keerthy <j-keerthy at ti.com>
  */
 
+#include "common-regulator.h"
 #include <common.h>
 #include <fdtdec.h>
 #include <errno.h>
@@ -18,6 +19,7 @@
 DECLARE_GLOBAL_DATA_PTR;
 
 struct gpio_regulator_platdata {
+	struct common_regulator_platdata common;
 	struct gpio_desc gpio; /* GPIO for regulator voltage control */
 	int states[GPIO_REGULATOR_MAX_STATES];
 	int voltages[GPIO_REGULATOR_MAX_STATES];
@@ -65,7 +67,7 @@ static int gpio_regulator_ofdata_to_platdata(struct udevice *dev)
 		j++;
 	}
 
-	return 0;
+	return common_regulator_ofdata_to_platdata(dev, &dev_pdata->common, "enable-gpios");
 }
 
 static int gpio_regulator_get_value(struct udevice *dev)
@@ -116,9 +118,23 @@ static int gpio_regulator_set_value(struct udevice *dev, int uV)
 	return 0;
 }
 
+static int gpio_regulator_get_enable(struct udevice *dev)
+{
+	struct gpio_regulator_platdata *dev_pdata = dev_get_platdata(dev);
+	return common_regulator_get_enable(dev, &dev_pdata->common);
+}
+
+static int gpio_regulator_set_enable(struct udevice *dev, bool enable)
+{
+	struct gpio_regulator_platdata *dev_pdata = dev_get_platdata(dev);
+	return common_regulator_set_enable(dev, &dev_pdata->common, enable);
+}
+
 static const struct dm_regulator_ops gpio_regulator_ops = {
 	.get_value	= gpio_regulator_get_value,
 	.set_value	= gpio_regulator_set_value,
+	.get_enable	= gpio_regulator_get_enable,
+	.set_enable	= gpio_regulator_set_enable,
 };
 
 static const struct udevice_id gpio_regulator_ids[] = {
-- 
2.17.1



More information about the U-Boot mailing list