[U-Boot] [PATCH] net: davinci_emac: convert to using the driver model
Adam Ford
aford173 at gmail.com
Wed Jun 12 16:46:22 UTC 2019
On Mon, Jun 3, 2019 at 10:29 AM Bartosz Golaszewski <brgl at bgdev.pl> wrote:
>
> pon., 3 cze 2019 o 15:03 Adam Ford <aford173 at gmail.com> napisał(a):
> >
> > On Mon, Jun 3, 2019 at 3:12 AM Bartosz Golaszewski <brgl at bgdev.pl> wrote:
> > >
> > > sob., 1 cze 2019 o 05:24 Adam Ford <aford173 at gmail.com> napisał(a):
> > > >
> > > > On Fri, May 31, 2019 at 8:32 AM Bartosz Golaszewski <brgl at bgdev.pl> wrote:
> > > > >
> > > > > From: Bartosz Golaszewski <bgolaszewski at baylibre.com>
> > > > >
> > > > > Now that we removed all legacy boards selecting TI_EMAC we can
> > > > > completely convert the driver code to using the driver model.
> > > > > This patch also updates all remaining users of davinci_emac.
> > > > >
> > > >
> > > > I took a break from this to come back, and I'm going to give some
> > > > feedback about how the driver was written. I still do not know why I
> > > > cannot get an IP address with this patch on the AM3517-evm.
> > > >
> > >
> > > Hi Adam,
> > >
> > > thanks for all the testing. Unfortunately I can only test with
> > > da850-evm and da850-lcdk.
> > >
> > > I was wondering if it is possible that the problem is caused by
> > > cpu_eth_init() from ./arch/arm/mach-omap2/omap3/emac. not being called
> > > with CONFIG_DM_ETH? The comments say that it brings the module out of
> > > reset, so maybe this is what causes the problem you're seeing?
> >
> > I looked into that nearly right away, but there is a chunk of code in
> > board/logicpd/am3517evm/am3517evm.c which has a function called
> > misc_init_r() which does the same thing. Looking through the debug
> > data, it appears as if the drive is communicating for a bit, but at
> > some point it dies. I'm not going to be able to look at it for a few
> > days. Is there any way you can submit a V2 to use #ifdef's to allow
> > users to use the same driver with and without DM_ETH? That would give
> > the da850/L138 boards the DM_ETH, and give me some time to
> > troubleshoot the am3517-evm. I know Sekhar works for TI and the AM3517
> > was the official development kit for TI back in the day. If TI has
> > some ideas, I'm open to trying them as well when I can get back to it.
> >
> > adam
>
> Hi Adam,
>
> I'm trying to find out if I can get my hands on one of these boards somehow.
>
> My priority for this week is the nand driver conversion. I'll also be
> off next week and the one after. I think that since we already removed
> a bunch of boards to make it possible to avoid the ifdef hell, it's
> better to wait a bit more than to merge something that we'll remove
> soon anyway.
>
> If Sekhar agrees, we can push back merging of this patch until it's fixed.
>
> There's also a big backlog of my other davinci patches on the list
> anyway, maybe they'll get picked up before we get back to it.
>
> Bart
>
> >
> > >
> > > > > Signed-off-by: Bartosz Golaszewski <bgolaszewski at baylibre.com>
> > > > > ---
> > > > > arch/arm/mach-davinci/cpu.c | 13 -----
> > > > > arch/arm/mach-omap2/omap3/emac.c | 3 +-
> > > > > board/davinci/da8xxevm/da850evm.c | 6 --
> > > > > board/davinci/da8xxevm/omapl138_lcdk.c | 14 -----
> > > > > board/logicpd/am3517evm/am3517evm.c | 1 -
> > > > > board/ti/ti816x/evm.c | 3 +-
> > > > > configs/am3517_evm_defconfig | 1 +
> > > > > configs/da850evm_defconfig | 1 +
> > > > > configs/da850evm_direct_nor_defconfig | 1 +
> > > > > configs/da850evm_nand_defconfig | 1 +
> > > > > configs/omapl138_lcdk_defconfig | 1 +
> > > > > configs/ti816x_evm_defconfig | 1 +
> > > > > drivers/net/ti/davinci_emac.c | 77 ++++++++++++++------------
> > > > > include/netdev.h | 1 -
> > > > > 14 files changed, 51 insertions(+), 73 deletions(-)
> > > > >
> > > > > diff --git a/arch/arm/mach-davinci/cpu.c b/arch/arm/mach-davinci/cpu.c
> > > > > index f97ad3fc74..9fd6564d04 100644
> > > > > --- a/arch/arm/mach-davinci/cpu.c
> > > > > +++ b/arch/arm/mach-davinci/cpu.c
> > > > > @@ -5,7 +5,6 @@
> > > > > */
> > > > >
> > > > > #include <common.h>
> > > > > -#include <netdev.h>
> > > > > #include <asm/arch/hardware.h>
> > > > > #include <asm/io.h>
> > > > >
> > > > > @@ -90,15 +89,3 @@ int set_cpu_clk_info(void)
> > > > > gd->bd->bi_dsp_freq = 0;
> > > > > return 0;
> > > > > }
> > > > > -
> > > > > -/*
> > > > > - * Initializes on-chip ethernet controllers.
> > > > > - * to override, implement board_eth_init()
> > > > > - */
> > > > > -int cpu_eth_init(bd_t *bis)
> > > > > -{
> > > > > -#if defined(CONFIG_DRIVER_TI_EMAC)
> > > > > - davinci_emac_initialize();
> > > > > -#endif
> > > > > - return 0;
> > > > > -}
> > > > > diff --git a/arch/arm/mach-omap2/omap3/emac.c b/arch/arm/mach-omap2/omap3/emac.c
> > > > > index c79e870183..fb0c9188f5 100644
> > > > > --- a/arch/arm/mach-omap2/omap3/emac.c
> > > > > +++ b/arch/arm/mach-omap2/omap3/emac.c
> > > > > @@ -7,7 +7,6 @@
> > > > > */
> > > > >
> > > > > #include <common.h>
> > > > > -#include <netdev.h>
> > > > > #include <asm/io.h>
> > > > > #include <asm/arch/am35x_def.h>
> > > > >
> > > > > @@ -24,5 +23,5 @@ int cpu_eth_init(bd_t *bis)
> > > > > reset &= ~CPGMACSS_SW_RST;
> > > > > writel(reset, &am35x_scm_general_regs->ip_sw_reset);
> > > > >
> > > > > - return davinci_emac_initialize();
> > > > > + return 0;
> > > > > }
> > > > > diff --git a/board/davinci/da8xxevm/da850evm.c b/board/davinci/da8xxevm/da850evm.c
> > > > > index 1bc26828bf..d090c00466 100644
> > > > > --- a/board/davinci/da8xxevm/da850evm.c
> > > > > +++ b/board/davinci/da8xxevm/da850evm.c
> > > > > @@ -13,7 +13,6 @@
> > > > > #include <environment.h>
> > > > > #include <i2c.h>
> > > > > #include <net.h>
> > > > > -#include <netdev.h>
> > > > > #include <spi.h>
> > > > > #include <spi_flash.h>
> > > > > #include <asm/arch/hardware.h>
> > > > > @@ -472,11 +471,6 @@ int board_eth_init(bd_t *bis)
> > > > > if (rmii_hw_init())
> > > > > printf("RMII hardware init failed!!!\n");
> > > > > #endif
> > > > > - if (!davinci_emac_initialize()) {
> > > > > - printf("Error: Ethernet init failed!\n");
> > > > > - return -1;
> > > > > - }
> > > > > -
> > > > > return 0;
> > > > > }
> > > > > #endif /* CONFIG_DRIVER_TI_EMAC */
> > > > > diff --git a/board/davinci/da8xxevm/omapl138_lcdk.c b/board/davinci/da8xxevm/omapl138_lcdk.c
> > > > > index 2c2f885d43..ef9656add8 100644
> > > > > --- a/board/davinci/da8xxevm/omapl138_lcdk.c
> > > > > +++ b/board/davinci/da8xxevm/omapl138_lcdk.c
> > > > > @@ -11,7 +11,6 @@
> > > > > #include <common.h>
> > > > > #include <i2c.h>
> > > > > #include <net.h>
> > > > > -#include <netdev.h>
> > > > > #include <spi.h>
> > > > > #include <spi_flash.h>
> > > > > #include <asm/arch/hardware.h>
> > > > > @@ -229,19 +228,6 @@ int board_init(void)
> > > > >
> > > > > #ifdef CONFIG_DRIVER_TI_EMAC
> > > > >
> > > > > -/*
> > > > > - * Initializes on-board ethernet controllers.
> > > > > - */
> > > > > -int board_eth_init(bd_t *bis)
> > > > > -{
> > > > > - if (!davinci_emac_initialize()) {
> > > > > - printf("Error: Ethernet init failed!\n");
> > > > > - return -1;
> > > > > - }
> > > > > -
> > > > > - return 0;
> > > > > -}
> > > > > -
> > > > > #endif /* CONFIG_DRIVER_TI_EMAC */
> > > > >
> > > > > #define CFG_MAC_ADDR_SPI_BUS 0
> > > > > diff --git a/board/logicpd/am3517evm/am3517evm.c b/board/logicpd/am3517evm/am3517evm.c
> > > > > index 10031a4801..bfd4e78274 100644
> > > > > --- a/board/logicpd/am3517evm/am3517evm.c
> > > > > +++ b/board/logicpd/am3517evm/am3517evm.c
> > > > > @@ -28,7 +28,6 @@
> > > > > #include <linux/usb/gadget.h>
> > > > > #include <linux/usb/musb.h>
> > > > > #include <i2c.h>
> > > > > -#include <netdev.h>
> > > > > #include "am3517evm.h"
> > > > >
> > > > > DECLARE_GLOBAL_DATA_PTR;
> > > > > diff --git a/board/ti/ti816x/evm.c b/board/ti/ti816x/evm.c
> > > > > index 07a084bab8..240df8cbe1 100644
> > > > > --- a/board/ti/ti816x/evm.c
> > > > > +++ b/board/ti/ti816x/evm.c
> > > > > @@ -9,7 +9,6 @@
> > > > > #include <common.h>
> > > > > #include <environment.h>
> > > > > #include <spl.h>
> > > > > -#include <netdev.h>
> > > > > #include <asm/cache.h>
> > > > > #include <asm/io.h>
> > > > > #include <asm/arch/clock.h>
> > > > > @@ -56,7 +55,7 @@ int board_eth_init(bd_t *bis)
> > > > > printf("Unable to read MAC address. Set <ethaddr>\n");
> > > > > }
> > > > >
> > > > > - return davinci_emac_initialize();
> > > > > + return 0;
> > > > > }
> > > > >
> > > > > #ifdef CONFIG_SPL_BUILD
> > > > > diff --git a/configs/am3517_evm_defconfig b/configs/am3517_evm_defconfig
> > > > > index b9f59f3291..5cb76322df 100644
> > > > > --- a/configs/am3517_evm_defconfig
> > > > > +++ b/configs/am3517_evm_defconfig
> > > > > @@ -44,6 +44,7 @@ CONFIG_SYS_NAND_BUSWIDTH_16BIT=y
> > > > > CONFIG_SYS_NAND_U_BOOT_LOCATIONS=y
> > > > > CONFIG_SYS_NAND_U_BOOT_OFFS=0x80000
> > > > > CONFIG_SPL_NAND_SIMPLE=y
> > > > > +CONFIG_DM_ETH=y
> > > > > CONFIG_MII=y
> > > > > CONFIG_DRIVER_TI_EMAC=y
> > > > > CONFIG_PINCTRL=y
> > > > > diff --git a/configs/da850evm_defconfig b/configs/da850evm_defconfig
> > > > > index 8c16d5c4f5..ca304ed78a 100644
> > > > > --- a/configs/da850evm_defconfig
> > > > > +++ b/configs/da850evm_defconfig
> > > > > @@ -60,6 +60,7 @@ CONFIG_SF_DEFAULT_SPEED=30000000
> > > > > CONFIG_SPI_FLASH_STMICRO=y
> > > > > CONFIG_SPI_FLASH_WINBOND=y
> > > > > CONFIG_SPI_FLASH_MTD=y
> > > > > +CONFIG_DM_ETH=y
> > > > > CONFIG_MII=y
> > > > > CONFIG_DRIVER_TI_EMAC=y
> > > > > CONFIG_PINCTRL=y
> > > > > diff --git a/configs/da850evm_direct_nor_defconfig b/configs/da850evm_direct_nor_defconfig
> > > > > index 166e77b8e3..9b1da07384 100644
> > > > > --- a/configs/da850evm_direct_nor_defconfig
> > > > > +++ b/configs/da850evm_direct_nor_defconfig
> > > > > @@ -50,6 +50,7 @@ CONFIG_DM_SPI_FLASH=y
> > > > > CONFIG_SPI_FLASH=y
> > > > > CONFIG_SPI_FLASH_STMICRO=y
> > > > > CONFIG_SPI_FLASH_WINBOND=y
> > > > > +CONFIG_DM_ETH=y
> > > > > CONFIG_MII=y
> > > > > CONFIG_DRIVER_TI_EMAC=y
> > > > > CONFIG_PINCTRL=y
> > > > > diff --git a/configs/da850evm_nand_defconfig b/configs/da850evm_nand_defconfig
> > > > > index b8eac0e659..eaf5d73dd8 100644
> > > > > --- a/configs/da850evm_nand_defconfig
> > > > > +++ b/configs/da850evm_nand_defconfig
> > > > > @@ -60,6 +60,7 @@ CONFIG_SPI_FLASH=y
> > > > > CONFIG_SPI_FLASH_STMICRO=y
> > > > > CONFIG_SPI_FLASH_WINBOND=y
> > > > > CONFIG_SPI_FLASH_MTD=y
> > > > > +CONFIG_DM_ETH=y
> > > > > CONFIG_PINCTRL=y
> > > > > CONFIG_PINCTRL_SINGLE=y
> > > > > CONFIG_DM_SERIAL=y
> > > > > diff --git a/configs/omapl138_lcdk_defconfig b/configs/omapl138_lcdk_defconfig
> > > > > index e43141844a..f93a06083e 100644
> > > > > --- a/configs/omapl138_lcdk_defconfig
> > > > > +++ b/configs/omapl138_lcdk_defconfig
> > > > > @@ -50,6 +50,7 @@ CONFIG_SPI_FLASH=y
> > > > > CONFIG_SF_DEFAULT_SPEED=30000000
> > > > > CONFIG_SPI_FLASH_STMICRO=y
> > > > > CONFIG_SPI_FLASH_WINBOND=y
> > > > > +CONFIG_DM_ETH=y
> > > > > CONFIG_MII=y
> > > > > CONFIG_DRIVER_TI_EMAC=y
> > > > > CONFIG_DM_SERIAL=y
> > > > > diff --git a/configs/ti816x_evm_defconfig b/configs/ti816x_evm_defconfig
> > > > > index bf877f596b..b233ab8cc9 100644
> > > > > --- a/configs/ti816x_evm_defconfig
> > > > > +++ b/configs/ti816x_evm_defconfig
> > > > > @@ -45,6 +45,7 @@ CONFIG_SYS_I2C_OMAP24XX=y
> > > > > CONFIG_MMC_OMAP_HS=y
> > > > > CONFIG_NAND=y
> > > > > CONFIG_SYS_NAND_BUSWIDTH_16BIT=y
> > > > > +CONFIG_DM_ETH=y
> > > > > CONFIG_MII=y
> > > > > CONFIG_DRIVER_TI_EMAC=y
> > > > > CONFIG_SYS_NS16550=y
> > > > > diff --git a/drivers/net/ti/davinci_emac.c b/drivers/net/ti/davinci_emac.c
> > > > > index 9d53984973..4b0a98a4aa 100644
> > > > > --- a/drivers/net/ti/davinci_emac.c
> > > > > +++ b/drivers/net/ti/davinci_emac.c
> > > > > @@ -26,7 +26,6 @@
> > > > > #include <net.h>
> > > > > #include <miiphy.h>
> > > > > #include <malloc.h>
> > > > > -#include <netdev.h>
> > > > > #include <linux/compiler.h>
> > > > > #include <asm/arch/emac_defs.h>
> > > > > #include <asm/io.h>
> > > > > @@ -107,8 +106,9 @@ static u_int8_t num_phy;
> > > > >
> > > > > phy_t phy[CONFIG_SYS_DAVINCI_EMAC_PHY_COUNT];
> > > > >
> > > > > -static int davinci_eth_set_mac_addr(struct eth_device *dev)
> > > > > +static int davinci_emac_write_hwaddr(struct udevice *dev)
> > > > > {
> > > > > + struct eth_pdata *pdata = dev_get_platdata(dev);
> > > > > unsigned long mac_hi;
> > > > > unsigned long mac_lo;
> > > > >
> > > > > @@ -118,12 +118,12 @@ static int davinci_eth_set_mac_addr(struct eth_device *dev)
> > > > > * Using channel 0 only - other channels are disabled
> > > > > * */
> > > > > writel(0, &adap_emac->MACINDEX);
> > > > > - mac_hi = (dev->enetaddr[3] << 24) |
> > > > > - (dev->enetaddr[2] << 16) |
> > > > > - (dev->enetaddr[1] << 8) |
> > > > > - (dev->enetaddr[0]);
> > > > > - mac_lo = (dev->enetaddr[5] << 8) |
> > > > > - (dev->enetaddr[4]);
> > > > > + mac_hi = (pdata->enetaddr[3] << 24) |
> > > > > + (pdata->enetaddr[2] << 16) |
> > > > > + (pdata->enetaddr[1] << 8) |
> > > > > + (pdata->enetaddr[0]);
> > > > > + mac_lo = (pdata->enetaddr[5] << 8) |
> > > > > + (pdata->enetaddr[4]);
> > > > >
> > > > > writel(mac_hi, &adap_emac->MACADDRHI);
> > > > > #if defined(DAVINCI_EMAC_VERSION2)
> > > > > @@ -411,7 +411,7 @@ static void __attribute__((unused)) davinci_eth_gigabit_enable(int phy_addr)
> > > > > }
> > > > >
> > > > > /* Eth device open */
> > > > > -static int davinci_eth_open(struct eth_device *dev, bd_t *bis)
> > > > > +static int davinci_emac_start(struct udevice *dev)
> > > > > {
> > > > > dv_reg_p addr;
> > > > > u_int32_t clkdiv, cnt, mac_control;
> > > > > @@ -447,7 +447,7 @@ static int davinci_eth_open(struct eth_device *dev, bd_t *bis)
> > > > > writel(1, &adap_emac->TXCONTROL);
> > > > > writel(1, &adap_emac->RXCONTROL);
> > > > >
> > > > > - davinci_eth_set_mac_addr(dev);
> > > > > + davinci_emac_write_hwaddr(dev);
> > > > >
> > > > > /* Set DMA 8 TX / 8 RX Head pointers to 0 */
> > > > > addr = &adap_emac->TX0HDP;
> > > > > @@ -588,7 +588,7 @@ static void davinci_eth_ch_teardown(int ch)
> > > > > }
> > > > >
> > > > > /* Eth device close */
> > > > > -static void davinci_eth_close(struct eth_device *dev)
> > > > > +static void davinci_emac_stop(struct udevice *dev)
> > > > > {
> > > > > debug_emac("+ emac_close\n");
> > > > >
> > > > > @@ -619,8 +619,8 @@ static int tx_send_loop = 0;
> > > > > * This function sends a single packet on the network and returns
> > > > > * positive number (number of bytes transmitted) or negative for error
> > > > > */
> > > > > -static int davinci_eth_send_packet (struct eth_device *dev,
> > > > > - void *packet, int length)
> > > > > +static int davinci_emac_send(struct udevice *dev,
> > > > > + void *packet, int length)
> > > > > {
> > > > > int ret_status = -1;
> > > > > int index;
> > > > > @@ -672,7 +672,7 @@ static int davinci_eth_send_packet (struct eth_device *dev,
> > > > > /*
> > > > > * This function handles receipt of a packet from the network
> > > > > */
> > > > > -static int davinci_eth_rcv_packet (struct eth_device *dev)
> > > > > +static int davinci_emac_recv(struct udevice *dev, int flags, uchar **packetp)
> > > > > {
> > > > > volatile emac_desc *rx_curr_desc;
> > > > > volatile emac_desc *curr_desc;
> > > > > @@ -742,6 +742,9 @@ static int davinci_eth_rcv_packet (struct eth_device *dev)
> > > > > }
To fix my crashing on the am3517, I had to add another instance here.
*packetp = rx_curr_desc->buffer;
> > > > > return (ret);
> > > > > }
I am not familiar enough with the driver to know why it works, so if
it's wrong, we'll need to diagnose it further, but I am able to
reliably connect with the am3517 now and I tested my da850-evm and
it's still working as well.
adam
> > > > > +
> > > > > + *packetp = rx_curr_desc->buffer;
> > > > > +
> > > > > return (0);
> > > > > }
> > > > >
> > > > > @@ -750,30 +753,12 @@ static int davinci_eth_rcv_packet (struct eth_device *dev)
> > > > > * EMAC modules power or pin multiplexors, that is done by board_init()
> > > > > * much earlier in bootup process. Returns 1 on success, 0 otherwise.
> > > > > */
> > > > > -int davinci_emac_initialize(void)
> > > > > +static int davinci_emac_probe(struct udevice *dev)
> > > >
> > > > From the device tree, we should be able to remove the hard-coded
> > > > values referencing:
> > > >
> > > > EMAC_BASE_ADDR;
> > > > EMAC_WRAPPER_BASE_ADDR;
> > > >
> > > > /* EMAC descriptors */
> > > > EMAC_WRAPPER_RAM_ADDR + EMAC_RX_DESC_BASE);
> > > > EMAC_WRAPPER_RAM_ADDR + EMAC_TX_DESC_BASE);
> > > >
> > > > From the device tree, EMAC_BASE_ADDR should point to the address of
> > > > the emac node. In the case of the AM3517, it would be 5c000000 and
> > > > this is how the name appears, so we should be able to use that.
> > > > EMAC_WRAPPER_BASE_ADDR should the also read by the device tree as an
> > > > offset from the base address by reading "ti,davinci-ctrl-reg-offset"
> > > > and "ti,davinci-ctrl-mod-reg-offset" in the case of AM3517, 0x5c000000
> > > > + 0x10000 + 0 give the same correct address as the
> > > > EMAC_WRAPPER_BASE_ADDR currently does.
> > > >
> > > > The EMAC_WRAPPER_RAM_ADDR is read by reading the
> > > > "ti,davinci-ctrl-ram-offset" which for am3517 is 0x20000 and 5c000000
> > > > + 0x20000 matches the value currenty set for 0x5C020000.
> > > >
> > > > I may have some of the math wrong a bit, but the linux driver doc
> > > > explains how these tree entries are defined, and I would think the
> > > > emac driver could be modeled after the Linux implementation.
> > > >
> > > > I think we should try to extract these and calculator the addresses
> > > > this way we can remove the hard-coded values and make the driver more
> > > > generic.
> > >
> > > Definitely and it's on my list, but first I wanted to do the
> > > conversion, make sure it works and then gradually improve the code.
> > >
> > > Best regards,
> > > Bartosz Golaszewski
> > >
> > > > I am going to bed now, but I'll try to beat on the da850 on Sunday.
> > > >
> > > > adam
> > > > > {
> > > > > u_int32_t phy_id;
> > > > > u_int16_t tmp;
> > > > > int i;
> > > > > int ret;
> > > > > - struct eth_device *dev;
> > > > > -
> > > > > - dev = malloc(sizeof *dev);
> > > > > -
> > > > > - if (dev == NULL)
> > > > > - return -1;
> > > > > -
> > > > > - memset(dev, 0, sizeof *dev);
> > > > > - strcpy(dev->name, "DaVinci-EMAC");
> > > > > -
> > > > > - dev->iobase = 0;
> > > > > - dev->init = davinci_eth_open;
> > > > > - dev->halt = davinci_eth_close;
> > > > > - dev->send = davinci_eth_send_packet;
> > > > > - dev->recv = davinci_eth_rcv_packet;
> > > > > - dev->write_hwaddr = davinci_eth_set_mac_addr;
> > > > > -
> > > > > - eth_register(dev);
> > > > >
> > > > > davinci_eth_mdio_enable();
> > > > >
> > > > > @@ -854,5 +839,29 @@ int davinci_emac_initialize(void)
> > > > > phy[i].auto_negotiate(i);
> > > > > }
> > > > > #endif
> > > > > - return(1);
> > > > > + return 0;
> > > > > }
> > > > > +
> > > > > +static const struct eth_ops davinci_emac_ops = {
> > > > > + .start = davinci_emac_start,
> > > > > + .send = davinci_emac_send,
> > > > > + .recv = davinci_emac_recv,
> > > > > + .stop = davinci_emac_stop,
> > > > > + .write_hwaddr = davinci_emac_write_hwaddr,
> > > > > +};
> > > > > +
> > > > > +static const struct udevice_id davinci_emac_ids[] = {
> > > > > + { .compatible = "ti,davinci-dm6467-emac" },
> > > > > + { .compatible = "ti,am3517-emac", },
> > > > > + { .compatible = "ti,dm816-emac", },
> > > > > + { }
> > > > > +};
> > > > > +
> > > > > +U_BOOT_DRIVER(davinci_emac) = {
> > > > > + .name = "davinci_emac",
> > > > > + .id = UCLASS_ETH,
> > > > > + .of_match = davinci_emac_ids,
> > > > > + .probe = davinci_emac_probe,
> > > > > + .ops = &davinci_emac_ops,
> > > > > + .platdata_auto_alloc_size = sizeof(struct eth_pdata),
> > > > > +};
> > > > > diff --git a/include/netdev.h b/include/netdev.h
> > > > > index 0a1a3a2d8d..a40c4adaad 100644
> > > > > --- a/include/netdev.h
> > > > > +++ b/include/netdev.h
> > > > > @@ -30,7 +30,6 @@ int bcm_sf2_eth_register(bd_t *bis, u8 dev_num);
> > > > > int bfin_EMAC_initialize(bd_t *bis);
> > > > > int calxedaxgmac_initialize(u32 id, ulong base_addr);
> > > > > int cs8900_initialize(u8 dev_num, int base_addr);
> > > > > -int davinci_emac_initialize(void);
> > > > > int dc21x4x_initialize(bd_t *bis);
> > > > > int designware_initialize(ulong base_addr, u32 interface);
> > > > > int dm9000_initialize(bd_t *bis);
> > > > > --
> > > > > 2.21.0
> > > > >
More information about the U-Boot
mailing list