[U-Boot] [PATCH v2] watchdog: tangier: Convert to use WDT class
Stefan Roese
sr at denx.de
Thu Jun 13 04:51:34 UTC 2019
On 12.06.19 19:28, Andy Shevchenko wrote:
> Convert legacy driver to use watchdog class.
>
> Signed-off-by: Andy Shevchenko <andriy.shevchenko at linux.intel.com>
> ---
> - dropped redundant assignments (Stefan)
> - used clamp_t() instead of max_t()/min_t() pair
>
> arch/x86/cpu/tangier/Kconfig | 1 -
> arch/x86/dts/edison.dts | 4 ++
> configs/edison_defconfig | 2 +
> drivers/watchdog/Kconfig | 17 ++++----
> drivers/watchdog/Makefile | 2 +-
> drivers/watchdog/tangier_wdt.c | 73 +++++++++++++++++++++-------------
> 6 files changed, 60 insertions(+), 39 deletions(-)
>
> diff --git a/arch/x86/cpu/tangier/Kconfig b/arch/x86/cpu/tangier/Kconfig
> index a3bd16799d..d2b7edecd6 100644
> --- a/arch/x86/cpu/tangier/Kconfig
> +++ b/arch/x86/cpu/tangier/Kconfig
> @@ -10,7 +10,6 @@ config INTEL_TANGIER
> imply MMC_SDHCI
> imply MMC_SDHCI_SDMA
> imply MMC_SDHCI_TANGIER
> - imply TANGIER_WATCHDOG
> imply USB
> imply USB_DWC3
>
> diff --git a/arch/x86/dts/edison.dts b/arch/x86/dts/edison.dts
> index e8564bbb8a..c0487656d3 100644
> --- a/arch/x86/dts/edison.dts
> +++ b/arch/x86/dts/edison.dts
> @@ -104,6 +104,10 @@
> reg = <0xff009000 0x1000>;
> };
>
> + watchdog: wdt at 0 {
> + compatible = "intel,tangier-wdt";
> + };
> +
> reset {
> compatible = "intel,reset-tangier";
> u-boot,dm-pre-reloc;
> diff --git a/configs/edison_defconfig b/configs/edison_defconfig
> index 840c87ac5a..468754493e 100644
> --- a/configs/edison_defconfig
> +++ b/configs/edison_defconfig
> @@ -39,5 +39,7 @@ CONFIG_USB_GADGET_VENDOR_NUM=0x8087
> CONFIG_USB_GADGET_PRODUCT_NUM=0x0a99
> CONFIG_USB_GADGET_DOWNLOAD=y
> # CONFIG_USB_HOST_ETHER is not set
> +CONFIG_WDT=y
> +CONFIG_WDT_TANGIER=y
> CONFIG_FAT_WRITE=y
> CONFIG_SHA1=y
> diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
> index b01dbc446d..2270ed2e39 100644
> --- a/drivers/watchdog/Kconfig
> +++ b/drivers/watchdog/Kconfig
> @@ -34,15 +34,6 @@ config OMAP_WATCHDOG
> help
> Say Y here to enable the OMAP3+ watchdog driver.
>
> -config TANGIER_WATCHDOG
> - bool "Intel Tangier watchdog"
> - depends on INTEL_MID
> - select HW_WATCHDOG
> - help
> - This enables support for watchdog controller available on
> - Intel Tangier SoC. If you're using a board with Intel Tangier
> - SoC, say Y here.
> -
> config ULP_WATCHDOG
> bool "i.MX7ULP watchdog"
> help
> @@ -161,4 +152,12 @@ config WDT_MPC8xx
> help
> Select this to enable mpc8xx watchdog timer
>
> +config WDT_TANGIER
> + bool "Intel Tangier watchdog timer support"
> + depends on WDT && INTEL_MID
> + help
> + This enables support for watchdog controller available on
> + Intel Tangier SoC. If you're using a board with Intel Tangier
> + SoC, say Y here.
> +
> endmenu
> diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
> index 6f20e73810..2dfc8a37b0 100644
> --- a/drivers/watchdog/Makefile
> +++ b/drivers/watchdog/Makefile
> @@ -14,7 +14,6 @@ obj-$(CONFIG_S5P) += s5p_wdt.o
> obj-$(CONFIG_XILINX_TB_WATCHDOG) += xilinx_tb_wdt.o
> obj-$(CONFIG_OMAP_WATCHDOG) += omap_wdt.o
> obj-$(CONFIG_DESIGNWARE_WATCHDOG) += designware_wdt.o
> -obj-$(CONFIG_TANGIER_WATCHDOG) += tangier_wdt.o
> obj-$(CONFIG_ULP_WATCHDOG) += ulp_wdog.o
> obj-$(CONFIG_WDT) += wdt-uclass.o
> obj-$(CONFIG_WDT_SANDBOX) += sandbox_wdt.o
> @@ -28,3 +27,4 @@ obj-$(CONFIG_WDT_MPC8xx) += mpc8xx_wdt.o
> obj-$(CONFIG_WDT_MT7621) += mt7621_wdt.o
> obj-$(CONFIG_WDT_MTK) += mtk_wdt.o
> obj-$(CONFIG_WDT_SP805) += sp805_wdt.o
> +obj-$(CONFIG_WDT_TANGIER) += tangier_wdt.o
> diff --git a/drivers/watchdog/tangier_wdt.c b/drivers/watchdog/tangier_wdt.c
> index be4a8f467a..21238dffa2 100644
> --- a/drivers/watchdog/tangier_wdt.c
> +++ b/drivers/watchdog/tangier_wdt.c
> @@ -3,7 +3,9 @@
> * Copyright (c) 2017 Intel Corporation
> */
> #include <common.h>
> -#include <watchdog.h>
> +#include <dm.h>
> +#include <wdt.h>
> +#include <div64.h>
> #include <asm/scu.h>
>
> /* Hardware timeout in seconds */
> @@ -12,12 +14,6 @@
> #define WDT_TIMEOUT_MAX 170
> #define WDT_DEFAULT_TIMEOUT 90
Nitpicking: If you by any chance need to re-send this patch again,
please remove WDT_DEFAULT_TIMEOUT completely from this file.
Reviewed-by: Stefan Roese <sr at denx.de>
Thanks,
Stefan
>
> -#ifndef CONFIG_WATCHDOG_TIMEOUT_MSECS
> -#define WATCHDOG_HEARTBEAT 60000
> -#else
> -#define WATCHDOG_HEARTBEAT CONFIG_WATCHDOG_TIMEOUT_MSECS
> -#endif
> -
> enum {
> SCU_WATCHDOG_START = 0,
> SCU_WATCHDOG_STOP = 1,
> @@ -25,39 +21,33 @@ enum {
> SCU_WATCHDOG_SET_ACTION_ON_TIMEOUT = 3,
> };
>
> -void hw_watchdog_reset(void)
> +static int tangier_wdt_reset(struct udevice *dev)
> {
> - static unsigned long last;
> - unsigned long now;
> -
> - if (gd->timer)
> - now = timer_get_us();
> - else
> - now = rdtsc() / 1000;
> -
> - /* Do not flood SCU */
> - if (last > now)
> - last = 0;
> -
> - if (unlikely((now - last) > (WDT_PRETIMEOUT / 2) * 1000000)) {
> - last = now;
> - scu_ipc_simple_command(IPCMSG_WATCHDOG_TIMER, SCU_WATCHDOG_KEEPALIVE);
> - }
> + scu_ipc_simple_command(IPCMSG_WATCHDOG_TIMER, SCU_WATCHDOG_KEEPALIVE);
> + return 0;
> }
>
> -int hw_watchdog_disable(void)
> +static int tangier_wdt_stop(struct udevice *dev)
> {
> return scu_ipc_simple_command(IPCMSG_WATCHDOG_TIMER, SCU_WATCHDOG_STOP);
> }
>
> -void hw_watchdog_init(void)
> +static int tangier_wdt_start(struct udevice *dev, u64 timeout_ms, ulong flags)
> {
> - u32 timeout = WATCHDOG_HEARTBEAT / 1000;
> + u32 timeout_sec;
> int in_size;
> struct ipc_wd_start {
> u32 pretimeout;
> u32 timeout;
> - } ipc_wd_start = { timeout - WDT_PRETIMEOUT, timeout };
> + } ipc_wd_start;
> +
> + /* Calculate timeout in seconds and restrict to min and max value */
> + do_div(timeout_ms, 1000);
> + timeout_sec = clamp_t(u32, timeout_ms, WDT_TIMEOUT_MIN, WDT_TIMEOUT_MAX);
> +
> + /* Update values in the IPC request */
> + ipc_wd_start.pretimeout = timeout_sec - WDT_PRETIMEOUT;
> + ipc_wd_start.timeout = timeout_sec;
>
> /*
> * SCU expects the input size for watchdog IPC
> @@ -67,4 +57,31 @@ void hw_watchdog_init(void)
>
> scu_ipc_command(IPCMSG_WATCHDOG_TIMER, SCU_WATCHDOG_START,
> (u32 *)&ipc_wd_start, in_size, NULL, 0);
> +
> + return 0;
> +}
> +
> +static const struct wdt_ops tangier_wdt_ops = {
> + .reset = tangier_wdt_reset,
> + .start = tangier_wdt_start,
> + .stop = tangier_wdt_stop,
> +};
> +
> +static const struct udevice_id tangier_wdt_ids[] = {
> + { .compatible = "intel,tangier-wdt" },
> + { /* sentinel */ }
> +};
> +
> +static int tangier_wdt_probe(struct udevice *dev)
> +{
> + debug("%s: Probing wdt%u\n", __func__, dev->seq);
> + return 0;
> }
> +
> +U_BOOT_DRIVER(wdt_tangier) = {
> + .name = "wdt_tangier",
> + .id = UCLASS_WDT,
> + .of_match = tangier_wdt_ids,
> + .ops = &tangier_wdt_ops,
> + .probe = tangier_wdt_probe,
> +};
>
More information about the U-Boot
mailing list