[U-Boot] [PATCH] arm: dts: Stratix10: Enable i2c

[Simon Goldschmidt]

On Thu, Jun 13, 2019 at 10:17 AM Ley Foon Tan <ley.foon.tan at intel.com> wrote:
>
> Enable i2c1 in Stratix 10 devkit.
>
> SOCFPGA_STRATIX10 # i2c bus
> Bus 0:  i2c at ffc02900
> SOCFPGA_STRATIX10 # i2c dev 0
> Setting bus to 0
> SOCFPGA_STRATIX10 # i2c probe
> Valid chip addresses: 14 4C 51 68 74
>
> Signed-off-by: Ley Foon Tan <ley.foon.tan at intel.com>

Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt at gmail.com>

> ---
>  arch/arm/dts/socfpga_stratix10_socdk.dts | 5 +++++
>  1 file changed, 5 insertions(+)
>
> diff --git a/arch/arm/dts/socfpga_stratix10_socdk.dts b/arch/arm/dts/socfpga_stratix10_socdk.dts
> index 2745050810..c5409df026 100755
> --- a/arch/arm/dts/socfpga_stratix10_socdk.dts
> +++ b/arch/arm/dts/socfpga_stratix10_socdk.dts
> @@ -9,6 +9,7 @@
>         model = "SoCFPGA Stratix 10 SoCDK";
>
>         aliases {
> +               i2c0 = &i2c1;
>                 serial0 = &uart0;
>         };
>
> @@ -77,6 +78,10 @@
>         };
>  };
>
> +&i2c1 {
> +       status = "okay";
> +};
> +
>  &mmc {
>         status = "okay";
>         cap-sd-highspeed;
> --
> 2.19.0
>