[U-Boot] [PATCH v2 1/4] armv8: ls1028a: The ls1028a platform supports the I2C driver model.

Chuanhua Han chuanhua.han at nxp.com
Thu Jun 13 13:20:24 UTC 2019


DM_I2C_COMPAT is a compatibility layer that allows using the non-DM
I2C API when DM_I2C is used.When DM_I2C_COMPAT is not enabled for
compilation, a compilation error will be generated. This patch
solves the problem that the i2c-related api of the ls1028a platform
does not support dm.

Signed-off-by: Chuanhua Han <chuanhua.han at nxp.com>
---
depends on: 
	- https://patchwork.ozlabs.org/project/uboot/list/?series=113364
	- https://patchwork.ozlabs.org/project/uboot/list/?series=110856
	- https://patchwork.ozlabs.org/project/uboot/list/?series=109677	

Changes in v2:
	- No change.

 arch/arm/cpu/armv8/fsl-layerscape/Kconfig | 8 --------
 board/freescale/ls1028a/ls1028a.c         | 8 ++++++++
 include/configs/ls1028a_common.h          | 3 ---
 include/configs/ls1028ardb.h              | 1 -
 4 files changed, 8 insertions(+), 12 deletions(-)

diff --git a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
index f3eaab960b..ee2b3f4a5d 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
+++ b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
@@ -40,14 +40,6 @@ config ARCH_LS1028A
 	select ARCH_EARLY_INIT_R
 	select BOARD_EARLY_INIT_F
 	select SYS_I2C_MXC
-	select SYS_I2C_MXC_I2C1
-	select SYS_I2C_MXC_I2C2
-	select SYS_I2C_MXC_I2C3
-	select SYS_I2C_MXC_I2C4
-	select SYS_I2C_MXC_I2C5
-	select SYS_I2C_MXC_I2C6
-	select SYS_I2C_MXC_I2C7
-	select SYS_I2C_MXC_I2C8
 	select SYS_FSL_ERRATUM_A009007
 	select SYS_FSL_ERRATUM_A008514 if !TFABOOT
 	select SYS_FSL_ERRATUM_A009663 if !TFABOOT
diff --git a/board/freescale/ls1028a/ls1028a.c b/board/freescale/ls1028a/ls1028a.c
index e5de4eb70c..49a9292c31 100644
--- a/board/freescale/ls1028a/ls1028a.c
+++ b/board/freescale/ls1028a/ls1028a.c
@@ -73,7 +73,15 @@ int board_init(void)
 #if defined(CONFIG_TARGET_LS1028ARDB)
 	u8 val = I2C_MUX_CH_DEFAULT;
 
+#ifndef CONFIG_DM_I2C
 	i2c_write(I2C_MUX_PCA_ADDR_PRI, 0x0b, 1, &val, 1);
+#else
+	struct udevice *dev;
+
+	if (!i2c_get_chip_for_busnum(0, I2C_MUX_PCA_ADDR_PRI, 1, &dev))
+		dm_i2c_write(dev, 0x0b, &val, 1);
+#endif
+
 #endif
 	return 0;
 }
diff --git a/include/configs/ls1028a_common.h b/include/configs/ls1028a_common.h
index d3d787f14d..0fa5095fc8 100644
--- a/include/configs/ls1028a_common.h
+++ b/include/configs/ls1028a_common.h
@@ -41,9 +41,6 @@
 /* Size of malloc() pool */
 #define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + 2048 * 1024)
 
-/* I2C */
-#define CONFIG_SYS_I2C
-
 /* Serial Port */
 #define CONFIG_CONS_INDEX       1
 #define CONFIG_SYS_NS16550_SERIAL
diff --git a/include/configs/ls1028ardb.h b/include/configs/ls1028ardb.h
index 10791be824..b77c36d279 100644
--- a/include/configs/ls1028ardb.h
+++ b/include/configs/ls1028ardb.h
@@ -22,7 +22,6 @@
 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
 
 #define CONFIG_QIXIS_I2C_ACCESS
-#define CONFIG_SYS_I2C_EARLY_INIT
 
 /*
  * QIXIS Definitions
-- 
2.17.1



More information about the U-Boot mailing list