[U-Boot] [PATCH v2 3/4] configs: ls1028a: enable DM support for pcf2127 rtc
Chuanhua Han
chuanhua.han at nxp.com
Thu Jun 13 13:20:26 UTC 2019
Enable related configs to support pcf2127 rtc DM feature for
ls1028ardb board.
Signed-off-by: Chuanhua Han <chuanhua.han at nxp.com>
---
depends on:
- https://patchwork.ozlabs.org/project/uboot/list/?series=113364
- https://patchwork.ozlabs.org/project/uboot/list/?series=110856
- https://patchwork.ozlabs.org/project/uboot/list/?series=109677
Changes in v2:
- Enable secure boot defconfig to support pcf2127 rtc DM
feature for ls1028ardb board.
configs/ls1028ardb_tfa_SECURE_BOOT_defconfig | 9 ++++++++-
configs/ls1028ardb_tfa_defconfig | 9 ++++++++-
2 files changed, 16 insertions(+), 2 deletions(-)
diff --git a/configs/ls1028ardb_tfa_SECURE_BOOT_defconfig b/configs/ls1028ardb_tfa_SECURE_BOOT_defconfig
index 3432f90087..c101a33a4b 100644
--- a/configs/ls1028ardb_tfa_SECURE_BOOT_defconfig
+++ b/configs/ls1028ardb_tfa_SECURE_BOOT_defconfig
@@ -1,5 +1,6 @@
CONFIG_ARM=y
CONFIG_TARGET_LS1028ARDB=y
+CONFIG_SYS_MALLOC_F_LEN=0x6000
CONFIG_SECURE_BOOT=y
CONFIG_SYS_FSL_SDHC_CLK_DIV=1
CONFIG_TFABOOT=y
@@ -8,7 +9,6 @@ CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT=y
CONFIG_SEC_FIRMWARE_ARMV8_PSCI=y
CONFIG_AHCI=y
CONFIG_DISTRO_DEFAULTS=y
-# CONFIG_SYS_MALLOC_F is not set
CONFIG_FIT_VERBOSE=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_OF_STDOUT_VIA_ALIAS=y
@@ -60,3 +60,10 @@ CONFIG_WDT=y
CONFIG_WDT_SP805=y
CONFIG_RSA=y
CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
+CONFIG_DM_I2C=y
+CONFIG_DM_RTC=y
+CONFIG_DM_GPIO=y
+CONFIG_CMD_DATE=y
+CONFIG_RTC_PCF2127=y
+CONFIG_I2C_MUX=y
+CONFIG_I2C_MUX_PCA954x=y
diff --git a/configs/ls1028ardb_tfa_defconfig b/configs/ls1028ardb_tfa_defconfig
index a8e4ddb7a8..440104cb18 100644
--- a/configs/ls1028ardb_tfa_defconfig
+++ b/configs/ls1028ardb_tfa_defconfig
@@ -1,5 +1,6 @@
CONFIG_ARM=y
CONFIG_TARGET_LS1028ARDB=y
+CONFIG_SYS_MALLOC_F_LEN=0x6000
CONFIG_SYS_FSL_SDHC_CLK_DIV=1
CONFIG_TFABOOT=y
CONFIG_NR_DRAM_BANKS=2
@@ -7,7 +8,6 @@ CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT=y
CONFIG_SEC_FIRMWARE_ARMV8_PSCI=y
CONFIG_AHCI=y
CONFIG_DISTRO_DEFAULTS=y
-# CONFIG_SYS_MALLOC_F is not set
CONFIG_FIT_VERBOSE=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_OF_STDOUT_VIA_ALIAS=y
@@ -62,3 +62,10 @@ CONFIG_USB_XHCI_DWC3=y
CONFIG_WDT=y
CONFIG_WDT_SP805=y
CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
+CONFIG_DM_I2C=y
+CONFIG_DM_RTC=y
+CONFIG_DM_GPIO=y
+CONFIG_CMD_DATE=y
+CONFIG_RTC_PCF2127=y
+CONFIG_I2C_MUX=y
+CONFIG_I2C_MUX_PCA954x=y
--
2.17.1
More information about the U-Boot
mailing list