[U-Boot] [PATCH v2 4/5] imx: pinctrl: Add support for i.MX28 mxs pinctrl driver

Lukasz Majewski lukma at denx.de
Fri Jun 14 06:49:31 UTC 2019


The code responsible for setting proper values in the MUX registers
(in the mxs_pinctrl_set_state()) has been ported from Barebox project
(branch: master, SHA1: eb3b0f7414cd8102844dd16b1c789e445e8947f8,
file: drivers/pinctrl/pinctrl-mxs.c).

As the pinctrl node in the imx28.dtsi file has gpio pins nodes as subnodes,
it was necessary to use 'dm_scan_fdt_dev()' (as a .bind method) to also
make them 'visible' by the DM's "gpio_mxs" driver.

Signed-off-by: Lukasz Majewski <lukma at denx.de>
---

Changes in v2: None

 drivers/pinctrl/nxp/Kconfig       |  10 +++
 drivers/pinctrl/nxp/Makefile      |   1 +
 drivers/pinctrl/nxp/pinctrl-mxs.c | 164 ++++++++++++++++++++++++++++++++++++++
 3 files changed, 175 insertions(+)
 create mode 100644 drivers/pinctrl/nxp/pinctrl-mxs.c

diff --git a/drivers/pinctrl/nxp/Kconfig b/drivers/pinctrl/nxp/Kconfig
index 61f93be42d..f2e67ca231 100644
--- a/drivers/pinctrl/nxp/Kconfig
+++ b/drivers/pinctrl/nxp/Kconfig
@@ -89,6 +89,16 @@ config PINCTRL_IMX8M
 	  only parses the 'fsl,pins' property and configure related
 	  registers.
 
+config PINCTRL_MXS
+	bool "NXP MXS pinctrl driver"
+	depends on ARCH_MX28 && PINCTRL_FULL
+	help
+	  Say Y here to enable the i.MX mxs pinctrl driver
+
+	  This option provides a simple pinctrl driver for i.MX mxs SoC
+	  familiy, e.g. i.MX28. This feature depends on device tree
+	  configuration.
+
 config PINCTRL_VYBRID
 	bool "Vybrid (vf610) pinctrl driver"
 	depends on ARCH_VF610 && PINCTRL_FULL
diff --git a/drivers/pinctrl/nxp/Makefile b/drivers/pinctrl/nxp/Makefile
index b340d9448a..b86448aac9 100644
--- a/drivers/pinctrl/nxp/Makefile
+++ b/drivers/pinctrl/nxp/Makefile
@@ -6,4 +6,5 @@ obj-$(CONFIG_PINCTRL_IMX7ULP)		+= pinctrl-imx7ulp.o
 obj-$(CONFIG_PINCTRL_IMX_SCU)		+= pinctrl-scu.o
 obj-$(CONFIG_PINCTRL_IMX8)		+= pinctrl-imx8.o
 obj-$(CONFIG_PINCTRL_IMX8M)		+= pinctrl-imx8m.o
+obj-$(CONFIG_PINCTRL_MXS)		+= pinctrl-mxs.o
 obj-$(CONFIG_PINCTRL_VYBRID)		+= pinctrl-vf610.o
diff --git a/drivers/pinctrl/nxp/pinctrl-mxs.c b/drivers/pinctrl/nxp/pinctrl-mxs.c
new file mode 100644
index 0000000000..42b1b7998b
--- /dev/null
+++ b/drivers/pinctrl/nxp/pinctrl-mxs.c
@@ -0,0 +1,164 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2019 DENX Software Engineering
+ * Lukasz Majewski, DENX Software Engineering, lukma at denx.de
+ *
+ * This work is based on drivers/pinctrl/pinctrl-mxs.c
+ * SHA1: eb3b0f7414cd8102844dd16b1c789e445e8947f8
+ * from Barebox project.
+ *
+ * Author of original Barebox pinctrl-mxs.c:
+ * Copyright (c) 2015 Sascha Hauer <s.hauer at pengutronix.de>
+ */
+
+#include <common.h>
+#include <linux/io.h>
+#include <linux/err.h>
+#include <dm.h>
+#include <dm/pinctrl.h>
+#include <dm/read.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define PINID(bank, pin)	((bank) * 32 + (pin))
+#define MUXID_TO_PINID(m)	PINID((m) >> 12 & 0xf, (m) >> 4 & 0xff)
+#define MUXID_TO_MUXSEL(m)	((m) & 0xf)
+#define PINID_TO_BANK(p)	((p) >> 5)
+#define PINID_TO_PIN(p)	((p) % 32)
+
+#define STMP_OFFSET_REG_SET     0x4
+#define STMP_OFFSET_REG_CLR     0x8
+#define STMP_OFFSET_REG_TOG     0xc
+
+struct mxs_pinctrl_priv {
+	void __iomem *base;
+};
+
+static int mxs_pinctrl_set_state(struct udevice *dev, struct udevice *config)
+{
+	int ma_present = 0, vol_present = 0, pull_present = 0;
+	struct mxs_pinctrl_priv *iomux = dev_get_priv(dev);
+	u32 *pin_data, val, ma, vol, pull;
+	int npins, size, i, ret;
+
+	debug("\n%s: set state: %s\n", __func__, config->name);
+
+	size = dev_read_size(config, "fsl,pinmux-ids");
+	if (size < 0)
+		return size;
+
+	if (!size || size % 4) {
+		dev_err(dev, "Invalid fsl,pinmux-ids property in %s\n",
+			config->name);
+		return -EINVAL;
+	}
+
+	npins = size / 4;
+
+	pin_data = devm_kzalloc(dev, size, 0);
+	if (!pin_data)
+		return -ENOMEM;
+
+	ret = dev_read_u32_array(config, "fsl,pinmux-ids", pin_data, npins);
+	if (ret) {
+		dev_err(dev, "Error reading pin data.\n");
+		devm_kfree(dev, pin_data);
+		return -EINVAL;
+	}
+
+	ret = dev_read_u32(config, "fsl,drive-strength", &ma);
+	if (!ret)
+		ma_present = 1;
+
+	ret = dev_read_u32(config, "fsl,voltage", &vol);
+	if (!ret)
+		vol_present = 1;
+
+	ret = dev_read_u32(config, "fsl,pull-up", &pull);
+	if (!ret)
+		pull_present = 1;
+
+	for (i = 0; i < npins; i++) {
+		int muxsel, pinid, bank, pin, shift;
+		void __iomem *reg;
+
+		val = *pin_data++;
+
+		muxsel = MUXID_TO_MUXSEL(val);
+		pinid = MUXID_TO_PINID(val);
+
+		bank = PINID_TO_BANK(pinid);
+		pin = PINID_TO_PIN(pinid);
+		reg = iomux->base + 0x100;
+		reg += bank * 0x20 + pin / 16 * 0x10;
+		shift = pin % 16 * 2;
+
+		writel(0x3 << shift, reg + STMP_OFFSET_REG_CLR);
+		writel(muxsel << shift, reg + STMP_OFFSET_REG_SET);
+
+		debug("(val: 0x%x) pin %d, mux %d, ma: %d, vol: %d, pull: %d\n",
+		      val, pinid, muxsel, ma, vol, pull);
+
+		/* drive */
+		reg = iomux->base + 0x300;
+		reg += bank * 0x40 + pin / 8 * 0x10;
+
+		/* mA */
+		if (ma_present) {
+			shift = pin % 8 * 4;
+			writel(0x3 << shift, reg + STMP_OFFSET_REG_CLR);
+			writel(ma << shift, reg + STMP_OFFSET_REG_SET);
+		}
+
+		/* vol */
+		if (vol_present) {
+			shift = pin % 8 * 4 + 2;
+			if (vol)
+				writel(1 << shift, reg + STMP_OFFSET_REG_SET);
+			else
+				writel(1 << shift, reg + STMP_OFFSET_REG_CLR);
+		}
+
+		/* pull */
+		if (pull_present) {
+			reg = iomux->base + 0x600;
+			reg += bank * 0x10;
+			shift = pin;
+			if (pull)
+				writel(1 << shift, reg + STMP_OFFSET_REG_SET);
+			else
+				writel(1 << shift, reg + STMP_OFFSET_REG_CLR);
+		}
+	}
+
+	return 0;
+}
+
+static struct pinctrl_ops mxs_pinctrl_ops = {
+	.set_state = mxs_pinctrl_set_state,
+};
+
+static int mxs_pinctrl_probe(struct udevice *dev)
+{
+	struct mxs_pinctrl_priv *iomux = dev_get_priv(dev);
+	iomux->base = dev_read_addr_ptr(dev);
+
+	return 0;
+}
+
+static const struct udevice_id mxs_pinctrl_match[] = {
+	{ .compatible = "fsl,imx28-pinctrl" },
+	{ /* sentinel */ }
+};
+
+U_BOOT_DRIVER(mxs_pinctrl) = {
+	.name = "mxs-pinctrl",
+	.id = UCLASS_PINCTRL,
+	.of_match = of_match_ptr(mxs_pinctrl_match),
+	.probe = mxs_pinctrl_probe,
+#if !CONFIG_IS_ENABLED(OF_PLATDATA)
+	.bind		= dm_scan_fdt_dev,
+#endif
+	.priv_auto_alloc_size = sizeof(struct mxs_pinctrl_priv),
+	.ops = &mxs_pinctrl_ops,
+};
-- 
2.11.0



More information about the U-Boot mailing list