[U-Boot] [PATCH v3 1/5] ARM: dts: imx: Copy imx28 device tree related files from Linux kernel (v5.1.9)

Lukasz Majewski lukma at denx.de
Sat Jun 15 22:34:38 UTC 2019


This commit copies from the Linux kernel (tag v5.1.9) i.MX28 related
device tree files.

Signed-off-by: Lukasz Majewski <lukma at denx.de>
---

Changes in v3:
- Update tag to 5.1.9
- Set more apropriate tags

Changes in v2: None

 arch/arm/dts/imx28-pinfunc.h |  506 ++++++++++++++++
 arch/arm/dts/imx28.dtsi      | 1330 ++++++++++++++++++++++++++++++++++++++++++
 arch/arm/dts/mxs-pinfunc.h   |   31 +
 3 files changed, 1867 insertions(+)
 create mode 100644 arch/arm/dts/imx28-pinfunc.h
 create mode 100644 arch/arm/dts/imx28.dtsi
 create mode 100644 arch/arm/dts/mxs-pinfunc.h

diff --git a/arch/arm/dts/imx28-pinfunc.h b/arch/arm/dts/imx28-pinfunc.h
new file mode 100644
index 0000000000..e11f69ba0f
--- /dev/null
+++ b/arch/arm/dts/imx28-pinfunc.h
@@ -0,0 +1,506 @@
+/*
+ * Header providing constants for i.MX28 pinctrl bindings.
+ *
+ * Copyright (C) 2013 Lothar Waßmann <LW at KARO-electronics.de>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#ifndef __DT_BINDINGS_MX28_PINCTRL_H__
+#define __DT_BINDINGS_MX28_PINCTRL_H__
+
+#include "mxs-pinfunc.h"
+
+#define MX28_PAD_GPMI_D00__GPMI_D0			0x0000
+#define MX28_PAD_GPMI_D01__GPMI_D1			0x0010
+#define MX28_PAD_GPMI_D02__GPMI_D2			0x0020
+#define MX28_PAD_GPMI_D03__GPMI_D3			0x0030
+#define MX28_PAD_GPMI_D04__GPMI_D4			0x0040
+#define MX28_PAD_GPMI_D05__GPMI_D5			0x0050
+#define MX28_PAD_GPMI_D06__GPMI_D6			0x0060
+#define MX28_PAD_GPMI_D07__GPMI_D7			0x0070
+#define MX28_PAD_GPMI_CE0N__GPMI_CE0N			0x0100
+#define MX28_PAD_GPMI_CE1N__GPMI_CE1N			0x0110
+#define MX28_PAD_GPMI_CE2N__GPMI_CE2N			0x0120
+#define MX28_PAD_GPMI_CE3N__GPMI_CE3N			0x0130
+#define MX28_PAD_GPMI_RDY0__GPMI_READY0			0x0140
+#define MX28_PAD_GPMI_RDY1__GPMI_READY1			0x0150
+#define MX28_PAD_GPMI_RDY2__GPMI_READY2			0x0160
+#define MX28_PAD_GPMI_RDY3__GPMI_READY3			0x0170
+#define MX28_PAD_GPMI_RDN__GPMI_RDN			0x0180
+#define MX28_PAD_GPMI_WRN__GPMI_WRN			0x0190
+#define MX28_PAD_GPMI_ALE__GPMI_ALE			0x01a0
+#define MX28_PAD_GPMI_CLE__GPMI_CLE			0x01b0
+#define MX28_PAD_GPMI_RESETN__GPMI_RESETN		0x01c0
+#define MX28_PAD_LCD_D00__LCD_D0			0x1000
+#define MX28_PAD_LCD_D01__LCD_D1			0x1010
+#define MX28_PAD_LCD_D02__LCD_D2			0x1020
+#define MX28_PAD_LCD_D03__LCD_D3			0x1030
+#define MX28_PAD_LCD_D04__LCD_D4			0x1040
+#define MX28_PAD_LCD_D05__LCD_D5			0x1050
+#define MX28_PAD_LCD_D06__LCD_D6			0x1060
+#define MX28_PAD_LCD_D07__LCD_D7			0x1070
+#define MX28_PAD_LCD_D08__LCD_D8			0x1080
+#define MX28_PAD_LCD_D09__LCD_D9			0x1090
+#define MX28_PAD_LCD_D10__LCD_D10			0x10a0
+#define MX28_PAD_LCD_D11__LCD_D11			0x10b0
+#define MX28_PAD_LCD_D12__LCD_D12			0x10c0
+#define MX28_PAD_LCD_D13__LCD_D13			0x10d0
+#define MX28_PAD_LCD_D14__LCD_D14			0x10e0
+#define MX28_PAD_LCD_D15__LCD_D15			0x10f0
+#define MX28_PAD_LCD_D16__LCD_D16			0x1100
+#define MX28_PAD_LCD_D17__LCD_D17			0x1110
+#define MX28_PAD_LCD_D18__LCD_D18			0x1120
+#define MX28_PAD_LCD_D19__LCD_D19			0x1130
+#define MX28_PAD_LCD_D20__LCD_D20			0x1140
+#define MX28_PAD_LCD_D21__LCD_D21			0x1150
+#define MX28_PAD_LCD_D22__LCD_D22			0x1160
+#define MX28_PAD_LCD_D23__LCD_D23			0x1170
+#define MX28_PAD_LCD_RD_E__LCD_RD_E			0x1180
+#define MX28_PAD_LCD_WR_RWN__LCD_WR_RWN			0x1190
+#define MX28_PAD_LCD_RS__LCD_RS				0x11a0
+#define MX28_PAD_LCD_CS__LCD_CS				0x11b0
+#define MX28_PAD_LCD_VSYNC__LCD_VSYNC			0x11c0
+#define MX28_PAD_LCD_HSYNC__LCD_HSYNC			0x11d0
+#define MX28_PAD_LCD_DOTCLK__LCD_DOTCLK			0x11e0
+#define MX28_PAD_LCD_ENABLE__LCD_ENABLE			0x11f0
+#define MX28_PAD_SSP0_DATA0__SSP0_D0			0x2000
+#define MX28_PAD_SSP0_DATA1__SSP0_D1			0x2010
+#define MX28_PAD_SSP0_DATA2__SSP0_D2			0x2020
+#define MX28_PAD_SSP0_DATA3__SSP0_D3			0x2030
+#define MX28_PAD_SSP0_DATA4__SSP0_D4			0x2040
+#define MX28_PAD_SSP0_DATA5__SSP0_D5			0x2050
+#define MX28_PAD_SSP0_DATA6__SSP0_D6			0x2060
+#define MX28_PAD_SSP0_DATA7__SSP0_D7			0x2070
+#define MX28_PAD_SSP0_CMD__SSP0_CMD			0x2080
+#define MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT		0x2090
+#define MX28_PAD_SSP0_SCK__SSP0_SCK			0x20a0
+#define MX28_PAD_SSP1_SCK__SSP1_SCK			0x20c0
+#define MX28_PAD_SSP1_CMD__SSP1_CMD			0x20d0
+#define MX28_PAD_SSP1_DATA0__SSP1_D0			0x20e0
+#define MX28_PAD_SSP1_DATA3__SSP1_D3			0x20f0
+#define MX28_PAD_SSP2_SCK__SSP2_SCK			0x2100
+#define MX28_PAD_SSP2_MOSI__SSP2_CMD			0x2110
+#define MX28_PAD_SSP2_MISO__SSP2_D0			0x2120
+#define MX28_PAD_SSP2_SS0__SSP2_D3			0x2130
+#define MX28_PAD_SSP2_SS1__SSP2_D4			0x2140
+#define MX28_PAD_SSP2_SS2__SSP2_D5			0x2150
+#define MX28_PAD_SSP3_SCK__SSP3_SCK			0x2180
+#define MX28_PAD_SSP3_MOSI__SSP3_CMD			0x2190
+#define MX28_PAD_SSP3_MISO__SSP3_D0			0x21a0
+#define MX28_PAD_SSP3_SS0__SSP3_D3			0x21b0
+#define MX28_PAD_AUART0_RX__AUART0_RX			0x3000
+#define MX28_PAD_AUART0_TX__AUART0_TX			0x3010
+#define MX28_PAD_AUART0_CTS__AUART0_CTS			0x3020
+#define MX28_PAD_AUART0_RTS__AUART0_RTS			0x3030
+#define MX28_PAD_AUART1_RX__AUART1_RX			0x3040
+#define MX28_PAD_AUART1_TX__AUART1_TX			0x3050
+#define MX28_PAD_AUART1_CTS__AUART1_CTS			0x3060
+#define MX28_PAD_AUART1_RTS__AUART1_RTS			0x3070
+#define MX28_PAD_AUART2_RX__AUART2_RX			0x3080
+#define MX28_PAD_AUART2_TX__AUART2_TX			0x3090
+#define MX28_PAD_AUART2_CTS__AUART2_CTS			0x30a0
+#define MX28_PAD_AUART2_RTS__AUART2_RTS			0x30b0
+#define MX28_PAD_AUART3_RX__AUART3_RX			0x30c0
+#define MX28_PAD_AUART3_TX__AUART3_TX			0x30d0
+#define MX28_PAD_AUART3_CTS__AUART3_CTS			0x30e0
+#define MX28_PAD_AUART3_RTS__AUART3_RTS			0x30f0
+#define MX28_PAD_PWM0__PWM_0				0x3100
+#define MX28_PAD_PWM1__PWM_1				0x3110
+#define MX28_PAD_PWM2__PWM_2				0x3120
+#define MX28_PAD_SAIF0_MCLK__SAIF0_MCLK			0x3140
+#define MX28_PAD_SAIF0_LRCLK__SAIF0_LRCLK		0x3150
+#define MX28_PAD_SAIF0_BITCLK__SAIF0_BITCLK		0x3160
+#define MX28_PAD_SAIF0_SDATA0__SAIF0_SDATA0		0x3170
+#define MX28_PAD_I2C0_SCL__I2C0_SCL			0x3180
+#define MX28_PAD_I2C0_SDA__I2C0_SDA			0x3190
+#define MX28_PAD_SAIF1_SDATA0__SAIF1_SDATA0		0x31a0
+#define MX28_PAD_SPDIF__SPDIF_TX			0x31b0
+#define MX28_PAD_PWM3__PWM_3				0x31c0
+#define MX28_PAD_PWM4__PWM_4				0x31d0
+#define MX28_PAD_LCD_RESET__LCD_RESET			0x31e0
+#define MX28_PAD_ENET0_MDC__ENET0_MDC			0x4000
+#define MX28_PAD_ENET0_MDIO__ENET0_MDIO			0x4010
+#define MX28_PAD_ENET0_RX_EN__ENET0_RX_EN		0x4020
+#define MX28_PAD_ENET0_RXD0__ENET0_RXD0			0x4030
+#define MX28_PAD_ENET0_RXD1__ENET0_RXD1			0x4040
+#define MX28_PAD_ENET0_TX_CLK__ENET0_TX_CLK		0x4050
+#define MX28_PAD_ENET0_TX_EN__ENET0_TX_EN		0x4060
+#define MX28_PAD_ENET0_TXD0__ENET0_TXD0			0x4070
+#define MX28_PAD_ENET0_TXD1__ENET0_TXD1			0x4080
+#define MX28_PAD_ENET0_RXD2__ENET0_RXD2			0x4090
+#define MX28_PAD_ENET0_RXD3__ENET0_RXD3			0x40a0
+#define MX28_PAD_ENET0_TXD2__ENET0_TXD2			0x40b0
+#define MX28_PAD_ENET0_TXD3__ENET0_TXD3			0x40c0
+#define MX28_PAD_ENET0_RX_CLK__ENET0_RX_CLK		0x40d0
+#define MX28_PAD_ENET0_COL__ENET0_COL			0x40e0
+#define MX28_PAD_ENET0_CRS__ENET0_CRS			0x40f0
+#define MX28_PAD_ENET_CLK__CLKCTRL_ENET			0x4100
+#define MX28_PAD_JTAG_RTCK__JTAG_RTCK			0x4140
+#define MX28_PAD_EMI_D00__EMI_DATA0			0x5000
+#define MX28_PAD_EMI_D01__EMI_DATA1			0x5010
+#define MX28_PAD_EMI_D02__EMI_DATA2			0x5020
+#define MX28_PAD_EMI_D03__EMI_DATA3			0x5030
+#define MX28_PAD_EMI_D04__EMI_DATA4			0x5040
+#define MX28_PAD_EMI_D05__EMI_DATA5			0x5050
+#define MX28_PAD_EMI_D06__EMI_DATA6			0x5060
+#define MX28_PAD_EMI_D07__EMI_DATA7			0x5070
+#define MX28_PAD_EMI_D08__EMI_DATA8			0x5080
+#define MX28_PAD_EMI_D09__EMI_DATA9			0x5090
+#define MX28_PAD_EMI_D10__EMI_DATA10			0x50a0
+#define MX28_PAD_EMI_D11__EMI_DATA11			0x50b0
+#define MX28_PAD_EMI_D12__EMI_DATA12			0x50c0
+#define MX28_PAD_EMI_D13__EMI_DATA13			0x50d0
+#define MX28_PAD_EMI_D14__EMI_DATA14			0x50e0
+#define MX28_PAD_EMI_D15__EMI_DATA15			0x50f0
+#define MX28_PAD_EMI_ODT0__EMI_ODT0			0x5100
+#define MX28_PAD_EMI_DQM0__EMI_DQM0			0x5110
+#define MX28_PAD_EMI_ODT1__EMI_ODT1			0x5120
+#define MX28_PAD_EMI_DQM1__EMI_DQM1			0x5130
+#define MX28_PAD_EMI_DDR_OPEN_FB__EMI_DDR_OPEN_FEEDBACK	0x5140
+#define MX28_PAD_EMI_CLK__EMI_CLK			0x5150
+#define MX28_PAD_EMI_DQS0__EMI_DQS0			0x5160
+#define MX28_PAD_EMI_DQS1__EMI_DQS1			0x5170
+#define MX28_PAD_EMI_DDR_OPEN__EMI_DDR_OPEN		0x51a0
+#define MX28_PAD_EMI_A00__EMI_ADDR0			0x6000
+#define MX28_PAD_EMI_A01__EMI_ADDR1			0x6010
+#define MX28_PAD_EMI_A02__EMI_ADDR2			0x6020
+#define MX28_PAD_EMI_A03__EMI_ADDR3			0x6030
+#define MX28_PAD_EMI_A04__EMI_ADDR4			0x6040
+#define MX28_PAD_EMI_A05__EMI_ADDR5			0x6050
+#define MX28_PAD_EMI_A06__EMI_ADDR6			0x6060
+#define MX28_PAD_EMI_A07__EMI_ADDR7			0x6070
+#define MX28_PAD_EMI_A08__EMI_ADDR8			0x6080
+#define MX28_PAD_EMI_A09__EMI_ADDR9			0x6090
+#define MX28_PAD_EMI_A10__EMI_ADDR10			0x60a0
+#define MX28_PAD_EMI_A11__EMI_ADDR11			0x60b0
+#define MX28_PAD_EMI_A12__EMI_ADDR12			0x60c0
+#define MX28_PAD_EMI_A13__EMI_ADDR13			0x60d0
+#define MX28_PAD_EMI_A14__EMI_ADDR14			0x60e0
+#define MX28_PAD_EMI_BA0__EMI_BA0			0x6100
+#define MX28_PAD_EMI_BA1__EMI_BA1			0x6110
+#define MX28_PAD_EMI_BA2__EMI_BA2			0x6120
+#define MX28_PAD_EMI_CASN__EMI_CASN			0x6130
+#define MX28_PAD_EMI_RASN__EMI_RASN			0x6140
+#define MX28_PAD_EMI_WEN__EMI_WEN			0x6150
+#define MX28_PAD_EMI_CE0N__EMI_CE0N			0x6160
+#define MX28_PAD_EMI_CE1N__EMI_CE1N			0x6170
+#define MX28_PAD_EMI_CKE__EMI_CKE			0x6180
+#define MX28_PAD_GPMI_D00__SSP1_D0			0x0001
+#define MX28_PAD_GPMI_D01__SSP1_D1			0x0011
+#define MX28_PAD_GPMI_D02__SSP1_D2			0x0021
+#define MX28_PAD_GPMI_D03__SSP1_D3			0x0031
+#define MX28_PAD_GPMI_D04__SSP1_D4			0x0041
+#define MX28_PAD_GPMI_D05__SSP1_D5			0x0051
+#define MX28_PAD_GPMI_D06__SSP1_D6			0x0061
+#define MX28_PAD_GPMI_D07__SSP1_D7			0x0071
+#define MX28_PAD_GPMI_CE0N__SSP3_D0			0x0101
+#define MX28_PAD_GPMI_CE1N__SSP3_D3			0x0111
+#define MX28_PAD_GPMI_CE2N__CAN1_TX			0x0121
+#define MX28_PAD_GPMI_CE3N__CAN1_RX			0x0131
+#define MX28_PAD_GPMI_RDY0__SSP1_CARD_DETECT		0x0141
+#define MX28_PAD_GPMI_RDY1__SSP1_CMD			0x0151
+#define MX28_PAD_GPMI_RDY2__CAN0_TX			0x0161
+#define MX28_PAD_GPMI_RDY3__CAN0_RX			0x0171
+#define MX28_PAD_GPMI_RDN__SSP3_SCK			0x0181
+#define MX28_PAD_GPMI_WRN__SSP1_SCK			0x0191
+#define MX28_PAD_GPMI_ALE__SSP3_D1			0x01a1
+#define MX28_PAD_GPMI_CLE__SSP3_D2			0x01b1
+#define MX28_PAD_GPMI_RESETN__SSP3_CMD			0x01c1
+#define MX28_PAD_LCD_D03__ETM_DA8			0x1031
+#define MX28_PAD_LCD_D04__ETM_DA9			0x1041
+#define MX28_PAD_LCD_D08__ETM_DA3			0x1081
+#define MX28_PAD_LCD_D09__ETM_DA4			0x1091
+#define MX28_PAD_LCD_D20__ENET1_1588_EVENT2_OUT		0x1141
+#define MX28_PAD_LCD_D21__ENET1_1588_EVENT2_IN		0x1151
+#define MX28_PAD_LCD_D22__ENET1_1588_EVENT3_OUT		0x1161
+#define MX28_PAD_LCD_D23__ENET1_1588_EVENT3_IN		0x1171
+#define MX28_PAD_LCD_RD_E__LCD_VSYNC			0x1181
+#define MX28_PAD_LCD_WR_RWN__LCD_HSYNC			0x1191
+#define MX28_PAD_LCD_RS__LCD_DOTCLK			0x11a1
+#define MX28_PAD_LCD_CS__LCD_ENABLE			0x11b1
+#define MX28_PAD_LCD_VSYNC__SAIF1_SDATA0		0x11c1
+#define MX28_PAD_LCD_HSYNC__SAIF1_SDATA1		0x11d1
+#define MX28_PAD_LCD_DOTCLK__SAIF1_MCLK			0x11e1
+#define MX28_PAD_SSP0_DATA4__SSP2_D0			0x2041
+#define MX28_PAD_SSP0_DATA5__SSP2_D3			0x2051
+#define MX28_PAD_SSP0_DATA6__SSP2_CMD			0x2061
+#define MX28_PAD_SSP0_DATA7__SSP2_SCK			0x2071
+#define MX28_PAD_SSP1_SCK__SSP2_D1			0x20c1
+#define MX28_PAD_SSP1_CMD__SSP2_D2			0x20d1
+#define MX28_PAD_SSP1_DATA0__SSP2_D6			0x20e1
+#define MX28_PAD_SSP1_DATA3__SSP2_D7			0x20f1
+#define MX28_PAD_SSP2_SCK__AUART2_RX			0x2101
+#define MX28_PAD_SSP2_MOSI__AUART2_TX			0x2111
+#define MX28_PAD_SSP2_MISO__AUART3_RX			0x2121
+#define MX28_PAD_SSP2_SS0__AUART3_TX			0x2131
+#define MX28_PAD_SSP2_SS1__SSP2_D1			0x2141
+#define MX28_PAD_SSP2_SS2__SSP2_D2			0x2151
+#define MX28_PAD_SSP3_SCK__AUART4_TX			0x2181
+#define MX28_PAD_SSP3_MOSI__AUART4_RX			0x2191
+#define MX28_PAD_SSP3_MISO__AUART4_RTS			0x21a1
+#define MX28_PAD_SSP3_SS0__AUART4_CTS			0x21b1
+#define MX28_PAD_AUART0_RX__I2C0_SCL			0x3001
+#define MX28_PAD_AUART0_TX__I2C0_SDA			0x3011
+#define MX28_PAD_AUART0_CTS__AUART4_RX			0x3021
+#define MX28_PAD_AUART0_RTS__AUART4_TX			0x3031
+#define MX28_PAD_AUART1_RX__SSP2_CARD_DETECT		0x3041
+#define MX28_PAD_AUART1_TX__SSP3_CARD_DETECT		0x3051
+#define MX28_PAD_AUART1_CTS__USB0_OVERCURRENT		0x3061
+#define MX28_PAD_AUART1_RTS__USB0_ID			0x3071
+#define MX28_PAD_AUART2_RX__SSP3_D1			0x3081
+#define MX28_PAD_AUART2_TX__SSP3_D2			0x3091
+#define MX28_PAD_AUART2_CTS__I2C1_SCL			0x30a1
+#define MX28_PAD_AUART2_RTS__I2C1_SDA			0x30b1
+#define MX28_PAD_AUART3_RX__CAN0_TX			0x30c1
+#define MX28_PAD_AUART3_TX__CAN0_RX			0x30d1
+#define MX28_PAD_AUART3_CTS__CAN1_TX			0x30e1
+#define MX28_PAD_AUART3_RTS__CAN1_RX			0x30f1
+#define MX28_PAD_PWM0__I2C1_SCL				0x3101
+#define MX28_PAD_PWM1__I2C1_SDA				0x3111
+#define MX28_PAD_PWM2__USB0_ID				0x3121
+#define MX28_PAD_SAIF0_MCLK__PWM_3			0x3141
+#define MX28_PAD_SAIF0_LRCLK__PWM_4			0x3151
+#define MX28_PAD_SAIF0_BITCLK__PWM_5			0x3161
+#define MX28_PAD_SAIF0_SDATA0__PWM_6			0x3171
+#define MX28_PAD_I2C0_SCL__TIMROT_ROTARYA		0x3181
+#define MX28_PAD_I2C0_SDA__TIMROT_ROTARYB		0x3191
+#define MX28_PAD_SAIF1_SDATA0__PWM_7			0x31a1
+#define MX28_PAD_LCD_RESET__LCD_VSYNC			0x31e1
+#define MX28_PAD_ENET0_MDC__GPMI_CE4N			0x4001
+#define MX28_PAD_ENET0_MDIO__GPMI_CE5N			0x4011
+#define MX28_PAD_ENET0_RX_EN__GPMI_CE6N			0x4021
+#define MX28_PAD_ENET0_RXD0__GPMI_CE7N			0x4031
+#define MX28_PAD_ENET0_RXD1__GPMI_READY4		0x4041
+#define MX28_PAD_ENET0_TX_CLK__HSADC_TRIGGER		0x4051
+#define MX28_PAD_ENET0_TX_EN__GPMI_READY5		0x4061
+#define MX28_PAD_ENET0_TXD0__GPMI_READY6		0x4071
+#define MX28_PAD_ENET0_TXD1__GPMI_READY7		0x4081
+#define MX28_PAD_ENET0_RXD2__ENET1_RXD0			0x4091
+#define MX28_PAD_ENET0_RXD3__ENET1_RXD1			0x40a1
+#define MX28_PAD_ENET0_TXD2__ENET1_TXD0			0x40b1
+#define MX28_PAD_ENET0_TXD3__ENET1_TXD1			0x40c1
+#define MX28_PAD_ENET0_RX_CLK__ENET0_RX_ER		0x40d1
+#define MX28_PAD_ENET0_COL__ENET1_TX_EN			0x40e1
+#define MX28_PAD_ENET0_CRS__ENET1_RX_EN			0x40f1
+#define MX28_PAD_GPMI_CE2N__ENET0_RX_ER			0x0122
+#define MX28_PAD_GPMI_CE3N__SAIF1_MCLK			0x0132
+#define MX28_PAD_GPMI_RDY0__USB0_ID			0x0142
+#define MX28_PAD_GPMI_RDY2__ENET0_TX_ER			0x0162
+#define MX28_PAD_GPMI_RDY3__HSADC_TRIGGER		0x0172
+#define MX28_PAD_GPMI_ALE__SSP3_D4			0x01a2
+#define MX28_PAD_GPMI_CLE__SSP3_D5			0x01b2
+#define MX28_PAD_LCD_D00__ETM_DA0			0x1002
+#define MX28_PAD_LCD_D01__ETM_DA1			0x1012
+#define MX28_PAD_LCD_D02__ETM_DA2			0x1022
+#define MX28_PAD_LCD_D03__ETM_DA3			0x1032
+#define MX28_PAD_LCD_D04__ETM_DA4			0x1042
+#define MX28_PAD_LCD_D05__ETM_DA5			0x1052
+#define MX28_PAD_LCD_D06__ETM_DA6			0x1062
+#define MX28_PAD_LCD_D07__ETM_DA7			0x1072
+#define MX28_PAD_LCD_D08__ETM_DA8			0x1082
+#define MX28_PAD_LCD_D09__ETM_DA9			0x1092
+#define MX28_PAD_LCD_D10__ETM_DA10			0x10a2
+#define MX28_PAD_LCD_D11__ETM_DA11			0x10b2
+#define MX28_PAD_LCD_D12__ETM_DA12			0x10c2
+#define MX28_PAD_LCD_D13__ETM_DA13			0x10d2
+#define MX28_PAD_LCD_D14__ETM_DA14			0x10e2
+#define MX28_PAD_LCD_D15__ETM_DA15			0x10f2
+#define MX28_PAD_LCD_D16__ETM_DA7			0x1102
+#define MX28_PAD_LCD_D17__ETM_DA6			0x1112
+#define MX28_PAD_LCD_D18__ETM_DA5			0x1122
+#define MX28_PAD_LCD_D19__ETM_DA4			0x1132
+#define MX28_PAD_LCD_D20__ETM_DA3			0x1142
+#define MX28_PAD_LCD_D21__ETM_DA2			0x1152
+#define MX28_PAD_LCD_D22__ETM_DA1			0x1162
+#define MX28_PAD_LCD_D23__ETM_DA0			0x1172
+#define MX28_PAD_LCD_RD_E__ETM_TCTL			0x1182
+#define MX28_PAD_LCD_WR_RWN__ETM_TCLK			0x1192
+#define MX28_PAD_LCD_HSYNC__ETM_TCTL			0x11d2
+#define MX28_PAD_LCD_DOTCLK__ETM_TCLK			0x11e2
+#define MX28_PAD_SSP1_SCK__ENET0_1588_EVENT2_OUT	0x20c2
+#define MX28_PAD_SSP1_CMD__ENET0_1588_EVENT2_IN		0x20d2
+#define MX28_PAD_SSP1_DATA0__ENET0_1588_EVENT3_OUT	0x20e2
+#define MX28_PAD_SSP1_DATA3__ENET0_1588_EVENT3_IN	0x20f2
+#define MX28_PAD_SSP2_SCK__SAIF0_SDATA1			0x2102
+#define MX28_PAD_SSP2_MOSI__SAIF0_SDATA2		0x2112
+#define MX28_PAD_SSP2_MISO__SAIF1_SDATA1		0x2122
+#define MX28_PAD_SSP2_SS0__SAIF1_SDATA2			0x2132
+#define MX28_PAD_SSP2_SS1__USB1_OVERCURRENT		0x2142
+#define MX28_PAD_SSP2_SS2__USB0_OVERCURRENT		0x2152
+#define MX28_PAD_SSP3_SCK__ENET1_1588_EVENT0_OUT	0x2182
+#define MX28_PAD_SSP3_MOSI__ENET1_1588_EVENT0_IN	0x2192
+#define MX28_PAD_SSP3_MISO__ENET1_1588_EVENT1_OUT	0x21a2
+#define MX28_PAD_SSP3_SS0__ENET1_1588_EVENT1_IN		0x21b2
+#define MX28_PAD_AUART0_RX__DUART_CTS			0x3002
+#define MX28_PAD_AUART0_TX__DUART_RTS			0x3012
+#define MX28_PAD_AUART0_CTS__DUART_RX			0x3022
+#define MX28_PAD_AUART0_RTS__DUART_TX			0x3032
+#define MX28_PAD_AUART1_RX__PWM_0			0x3042
+#define MX28_PAD_AUART1_TX__PWM_1			0x3052
+#define MX28_PAD_AUART1_CTS__TIMROT_ROTARYA		0x3062
+#define MX28_PAD_AUART1_RTS__TIMROT_ROTARYB		0x3072
+#define MX28_PAD_AUART2_RX__SSP3_D4			0x3082
+#define MX28_PAD_AUART2_TX__SSP3_D5			0x3092
+#define MX28_PAD_AUART2_CTS__SAIF1_BITCLK		0x30a2
+#define MX28_PAD_AUART2_RTS__SAIF1_LRCLK		0x30b2
+#define MX28_PAD_AUART3_RX__ENET0_1588_EVENT0_OUT	0x30c2
+#define MX28_PAD_AUART3_TX__ENET0_1588_EVENT0_IN	0x30d2
+#define MX28_PAD_AUART3_CTS__ENET0_1588_EVENT1_OUT	0x30e2
+#define MX28_PAD_AUART3_RTS__ENET0_1588_EVENT1_IN	0x30f2
+#define MX28_PAD_PWM0__DUART_RX				0x3102
+#define MX28_PAD_PWM1__DUART_TX				0x3112
+#define MX28_PAD_PWM2__USB1_OVERCURRENT			0x3122
+#define MX28_PAD_SAIF0_MCLK__AUART4_CTS			0x3142
+#define MX28_PAD_SAIF0_LRCLK__AUART4_RTS		0x3152
+#define MX28_PAD_SAIF0_BITCLK__AUART4_RX		0x3162
+#define MX28_PAD_SAIF0_SDATA0__AUART4_TX		0x3172
+#define MX28_PAD_I2C0_SCL__DUART_RX			0x3182
+#define MX28_PAD_I2C0_SDA__DUART_TX			0x3192
+#define MX28_PAD_SAIF1_SDATA0__SAIF0_SDATA1		0x31a2
+#define MX28_PAD_SPDIF__ENET1_RX_ER			0x31b2
+#define MX28_PAD_ENET0_MDC__SAIF0_SDATA1		0x4002
+#define MX28_PAD_ENET0_MDIO__SAIF0_SDATA2		0x4012
+#define MX28_PAD_ENET0_RX_EN__SAIF1_SDATA1		0x4022
+#define MX28_PAD_ENET0_RXD0__SAIF1_SDATA2		0x4032
+#define MX28_PAD_ENET0_TX_CLK__ENET0_1588_EVENT2_OUT	0x4052
+#define MX28_PAD_ENET0_RXD2__ENET0_1588_EVENT0_OUT	0x4092
+#define MX28_PAD_ENET0_RXD3__ENET0_1588_EVENT0_IN	0x40a2
+#define MX28_PAD_ENET0_TXD2__ENET0_1588_EVENT1_OUT	0x40b2
+#define MX28_PAD_ENET0_TXD3__ENET0_1588_EVENT1_IN	0x40c2
+#define MX28_PAD_ENET0_RX_CLK__ENET0_1588_EVENT2_IN	0x40d2
+#define MX28_PAD_ENET0_COL__ENET0_1588_EVENT3_OUT	0x40e2
+#define MX28_PAD_ENET0_CRS__ENET0_1588_EVENT3_IN	0x40f2
+#define MX28_PAD_GPMI_D00__GPIO_0_0			0x0003
+#define MX28_PAD_GPMI_D01__GPIO_0_1			0x0013
+#define MX28_PAD_GPMI_D02__GPIO_0_2			0x0023
+#define MX28_PAD_GPMI_D03__GPIO_0_3			0x0033
+#define MX28_PAD_GPMI_D04__GPIO_0_4			0x0043
+#define MX28_PAD_GPMI_D05__GPIO_0_5			0x0053
+#define MX28_PAD_GPMI_D06__GPIO_0_6			0x0063
+#define MX28_PAD_GPMI_D07__GPIO_0_7			0x0073
+#define MX28_PAD_GPMI_CE0N__GPIO_0_16			0x0103
+#define MX28_PAD_GPMI_CE1N__GPIO_0_17			0x0113
+#define MX28_PAD_GPMI_CE2N__GPIO_0_18			0x0123
+#define MX28_PAD_GPMI_CE3N__GPIO_0_19			0x0133
+#define MX28_PAD_GPMI_RDY0__GPIO_0_20			0x0143
+#define MX28_PAD_GPMI_RDY1__GPIO_0_21			0x0153
+#define MX28_PAD_GPMI_RDY2__GPIO_0_22			0x0163
+#define MX28_PAD_GPMI_RDY3__GPIO_0_23			0x0173
+#define MX28_PAD_GPMI_RDN__GPIO_0_24			0x0183
+#define MX28_PAD_GPMI_WRN__GPIO_0_25			0x0193
+#define MX28_PAD_GPMI_ALE__GPIO_0_26			0x01a3
+#define MX28_PAD_GPMI_CLE__GPIO_0_27			0x01b3
+#define MX28_PAD_GPMI_RESETN__GPIO_0_28			0x01c3
+#define MX28_PAD_LCD_D00__GPIO_1_0			0x1003
+#define MX28_PAD_LCD_D01__GPIO_1_1			0x1013
+#define MX28_PAD_LCD_D02__GPIO_1_2			0x1023
+#define MX28_PAD_LCD_D03__GPIO_1_3			0x1033
+#define MX28_PAD_LCD_D04__GPIO_1_4			0x1043
+#define MX28_PAD_LCD_D05__GPIO_1_5			0x1053
+#define MX28_PAD_LCD_D06__GPIO_1_6			0x1063
+#define MX28_PAD_LCD_D07__GPIO_1_7			0x1073
+#define MX28_PAD_LCD_D08__GPIO_1_8			0x1083
+#define MX28_PAD_LCD_D09__GPIO_1_9			0x1093
+#define MX28_PAD_LCD_D10__GPIO_1_10			0x10a3
+#define MX28_PAD_LCD_D11__GPIO_1_11			0x10b3
+#define MX28_PAD_LCD_D12__GPIO_1_12			0x10c3
+#define MX28_PAD_LCD_D13__GPIO_1_13			0x10d3
+#define MX28_PAD_LCD_D14__GPIO_1_14			0x10e3
+#define MX28_PAD_LCD_D15__GPIO_1_15			0x10f3
+#define MX28_PAD_LCD_D16__GPIO_1_16			0x1103
+#define MX28_PAD_LCD_D17__GPIO_1_17			0x1113
+#define MX28_PAD_LCD_D18__GPIO_1_18			0x1123
+#define MX28_PAD_LCD_D19__GPIO_1_19			0x1133
+#define MX28_PAD_LCD_D20__GPIO_1_20			0x1143
+#define MX28_PAD_LCD_D21__GPIO_1_21			0x1153
+#define MX28_PAD_LCD_D22__GPIO_1_22			0x1163
+#define MX28_PAD_LCD_D23__GPIO_1_23			0x1173
+#define MX28_PAD_LCD_RD_E__GPIO_1_24			0x1183
+#define MX28_PAD_LCD_WR_RWN__GPIO_1_25			0x1193
+#define MX28_PAD_LCD_RS__GPIO_1_26			0x11a3
+#define MX28_PAD_LCD_CS__GPIO_1_27			0x11b3
+#define MX28_PAD_LCD_VSYNC__GPIO_1_28			0x11c3
+#define MX28_PAD_LCD_HSYNC__GPIO_1_29			0x11d3
+#define MX28_PAD_LCD_DOTCLK__GPIO_1_30			0x11e3
+#define MX28_PAD_LCD_ENABLE__GPIO_1_31			0x11f3
+#define MX28_PAD_SSP0_DATA0__GPIO_2_0			0x2003
+#define MX28_PAD_SSP0_DATA1__GPIO_2_1			0x2013
+#define MX28_PAD_SSP0_DATA2__GPIO_2_2			0x2023
+#define MX28_PAD_SSP0_DATA3__GPIO_2_3			0x2033
+#define MX28_PAD_SSP0_DATA4__GPIO_2_4			0x2043
+#define MX28_PAD_SSP0_DATA5__GPIO_2_5			0x2053
+#define MX28_PAD_SSP0_DATA6__GPIO_2_6			0x2063
+#define MX28_PAD_SSP0_DATA7__GPIO_2_7			0x2073
+#define MX28_PAD_SSP0_CMD__GPIO_2_8			0x2083
+#define MX28_PAD_SSP0_DETECT__GPIO_2_9			0x2093
+#define MX28_PAD_SSP0_SCK__GPIO_2_10			0x20a3
+#define MX28_PAD_SSP1_SCK__GPIO_2_12			0x20c3
+#define MX28_PAD_SSP1_CMD__GPIO_2_13			0x20d3
+#define MX28_PAD_SSP1_DATA0__GPIO_2_14			0x20e3
+#define MX28_PAD_SSP1_DATA3__GPIO_2_15			0x20f3
+#define MX28_PAD_SSP2_SCK__GPIO_2_16			0x2103
+#define MX28_PAD_SSP2_MOSI__GPIO_2_17			0x2113
+#define MX28_PAD_SSP2_MISO__GPIO_2_18			0x2123
+#define MX28_PAD_SSP2_SS0__GPIO_2_19			0x2133
+#define MX28_PAD_SSP2_SS1__GPIO_2_20			0x2143
+#define MX28_PAD_SSP2_SS2__GPIO_2_21			0x2153
+#define MX28_PAD_SSP3_SCK__GPIO_2_24			0x2183
+#define MX28_PAD_SSP3_MOSI__GPIO_2_25			0x2193
+#define MX28_PAD_SSP3_MISO__GPIO_2_26			0x21a3
+#define MX28_PAD_SSP3_SS0__GPIO_2_27			0x21b3
+#define MX28_PAD_AUART0_RX__GPIO_3_0			0x3003
+#define MX28_PAD_AUART0_TX__GPIO_3_1			0x3013
+#define MX28_PAD_AUART0_CTS__GPIO_3_2			0x3023
+#define MX28_PAD_AUART0_RTS__GPIO_3_3			0x3033
+#define MX28_PAD_AUART1_RX__GPIO_3_4			0x3043
+#define MX28_PAD_AUART1_TX__GPIO_3_5			0x3053
+#define MX28_PAD_AUART1_CTS__GPIO_3_6			0x3063
+#define MX28_PAD_AUART1_RTS__GPIO_3_7			0x3073
+#define MX28_PAD_AUART2_RX__GPIO_3_8			0x3083
+#define MX28_PAD_AUART2_TX__GPIO_3_9			0x3093
+#define MX28_PAD_AUART2_CTS__GPIO_3_10			0x30a3
+#define MX28_PAD_AUART2_RTS__GPIO_3_11			0x30b3
+#define MX28_PAD_AUART3_RX__GPIO_3_12			0x30c3
+#define MX28_PAD_AUART3_TX__GPIO_3_13			0x30d3
+#define MX28_PAD_AUART3_CTS__GPIO_3_14			0x30e3
+#define MX28_PAD_AUART3_RTS__GPIO_3_15			0x30f3
+#define MX28_PAD_PWM0__GPIO_3_16			0x3103
+#define MX28_PAD_PWM1__GPIO_3_17			0x3113
+#define MX28_PAD_PWM2__GPIO_3_18			0x3123
+#define MX28_PAD_SAIF0_MCLK__GPIO_3_20			0x3143
+#define MX28_PAD_SAIF0_LRCLK__GPIO_3_21			0x3153
+#define MX28_PAD_SAIF0_BITCLK__GPIO_3_22		0x3163
+#define MX28_PAD_SAIF0_SDATA0__GPIO_3_23		0x3173
+#define MX28_PAD_I2C0_SCL__GPIO_3_24			0x3183
+#define MX28_PAD_I2C0_SDA__GPIO_3_25			0x3193
+#define MX28_PAD_SAIF1_SDATA0__GPIO_3_26		0x31a3
+#define MX28_PAD_SPDIF__GPIO_3_27			0x31b3
+#define MX28_PAD_PWM3__GPIO_3_28			0x31c3
+#define MX28_PAD_PWM4__GPIO_3_29			0x31d3
+#define MX28_PAD_LCD_RESET__GPIO_3_30			0x31e3
+#define MX28_PAD_ENET0_MDC__GPIO_4_0			0x4003
+#define MX28_PAD_ENET0_MDIO__GPIO_4_1			0x4013
+#define MX28_PAD_ENET0_RX_EN__GPIO_4_2			0x4023
+#define MX28_PAD_ENET0_RXD0__GPIO_4_3			0x4033
+#define MX28_PAD_ENET0_RXD1__GPIO_4_4			0x4043
+#define MX28_PAD_ENET0_TX_CLK__GPIO_4_5			0x4053
+#define MX28_PAD_ENET0_TX_EN__GPIO_4_6			0x4063
+#define MX28_PAD_ENET0_TXD0__GPIO_4_7			0x4073
+#define MX28_PAD_ENET0_TXD1__GPIO_4_8			0x4083
+#define MX28_PAD_ENET0_RXD2__GPIO_4_9			0x4093
+#define MX28_PAD_ENET0_RXD3__GPIO_4_10			0x40a3
+#define MX28_PAD_ENET0_TXD2__GPIO_4_11			0x40b3
+#define MX28_PAD_ENET0_TXD3__GPIO_4_12			0x40c3
+#define MX28_PAD_ENET0_RX_CLK__GPIO_4_13		0x40d3
+#define MX28_PAD_ENET0_COL__GPIO_4_14			0x40e3
+#define MX28_PAD_ENET0_CRS__GPIO_4_15			0x40f3
+#define MX28_PAD_ENET_CLK__GPIO_4_16			0x4103
+#define MX28_PAD_JTAG_RTCK__GPIO_4_20			0x4143
+
+#endif /* __DT_BINDINGS_MX28_PINCTRL_H__ */
diff --git a/arch/arm/dts/imx28.dtsi b/arch/arm/dts/imx28.dtsi
new file mode 100644
index 0000000000..e14d8ef015
--- /dev/null
+++ b/arch/arm/dts/imx28.dtsi
@@ -0,0 +1,1330 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright 2012 Freescale Semiconductor, Inc.
+
+#include <dt-bindings/gpio/gpio.h>
+#include "imx28-pinfunc.h"
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	interrupt-parent = <&icoll>;
+	/*
+	 * The decompressor and also some bootloaders rely on a
+	 * pre-existing /chosen node to be available to insert the
+	 * command line and merge other ATAGS info.
+	 */
+	chosen {};
+
+	aliases {
+		ethernet0 = &mac0;
+		ethernet1 = &mac1;
+		gpio0 = &gpio0;
+		gpio1 = &gpio1;
+		gpio2 = &gpio2;
+		gpio3 = &gpio3;
+		gpio4 = &gpio4;
+		saif0 = &saif0;
+		saif1 = &saif1;
+		serial0 = &auart0;
+		serial1 = &auart1;
+		serial2 = &auart2;
+		serial3 = &auart3;
+		serial4 = &auart4;
+		spi0 = &ssp1;
+		spi1 = &ssp2;
+		usbphy0 = &usbphy0;
+		usbphy1 = &usbphy1;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu at 0 {
+			compatible = "arm,arm926ej-s";
+			device_type = "cpu";
+			reg = <0>;
+		};
+	};
+
+	apb at 80000000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x80000000 0x80000>;
+		ranges;
+
+		apbh at 80000000 {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x80000000 0x3c900>;
+			ranges;
+
+			icoll: interrupt-controller at 80000000 {
+				compatible = "fsl,imx28-icoll", "fsl,icoll";
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				reg = <0x80000000 0x2000>;
+			};
+
+			hsadc: hsadc at 80002000 {
+				reg = <0x80002000 0x2000>;
+				interrupts = <13>;
+				dmas = <&dma_apbh 12>;
+				dma-names = "rx";
+				status = "disabled";
+			};
+
+			dma_apbh: dma-apbh at 80004000 {
+				compatible = "fsl,imx28-dma-apbh";
+				reg = <0x80004000 0x2000>;
+				interrupts = <82 83 84 85
+					      88 88 88 88
+					      88 88 88 88
+					      87 86 0 0>;
+				interrupt-names = "ssp0", "ssp1", "ssp2", "ssp3",
+						  "gpmi0", "gmpi1", "gpmi2", "gmpi3",
+						  "gpmi4", "gmpi5", "gpmi6", "gmpi7",
+						  "hsadc", "lcdif", "empty", "empty";
+				#dma-cells = <1>;
+				dma-channels = <16>;
+				clocks = <&clks 25>;
+			};
+
+			perfmon: perfmon at 80006000 {
+				reg = <0x80006000 0x800>;
+				interrupts = <27>;
+				status = "disabled";
+			};
+
+			gpmi: gpmi-nand at 8000c000 {
+				compatible = "fsl,imx28-gpmi-nand";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0x8000c000 0x2000>, <0x8000a000 0x2000>;
+				reg-names = "gpmi-nand", "bch";
+				interrupts = <41>;
+				interrupt-names = "bch";
+				clocks = <&clks 50>;
+				clock-names = "gpmi_io";
+				dmas = <&dma_apbh 4>;
+				dma-names = "rx-tx";
+				status = "disabled";
+			};
+
+			ssp0: spi at 80010000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x80010000 0x2000>;
+				interrupts = <96>;
+				clocks = <&clks 46>;
+				dmas = <&dma_apbh 0>;
+				dma-names = "rx-tx";
+				status = "disabled";
+			};
+
+			ssp1: spi at 80012000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x80012000 0x2000>;
+				interrupts = <97>;
+				clocks = <&clks 47>;
+				dmas = <&dma_apbh 1>;
+				dma-names = "rx-tx";
+				status = "disabled";
+			};
+
+			ssp2: spi at 80014000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x80014000 0x2000>;
+				interrupts = <98>;
+				clocks = <&clks 48>;
+				dmas = <&dma_apbh 2>;
+				dma-names = "rx-tx";
+				status = "disabled";
+			};
+
+			ssp3: spi at 80016000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x80016000 0x2000>;
+				interrupts = <99>;
+				clocks = <&clks 49>;
+				dmas = <&dma_apbh 3>;
+				dma-names = "rx-tx";
+				status = "disabled";
+			};
+
+			pinctrl: pinctrl at 80018000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx28-pinctrl", "simple-bus";
+				reg = <0x80018000 0x2000>;
+
+				gpio0: gpio at 0 {
+					compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
+					reg = <0>;
+					interrupts = <127>;
+					gpio-controller;
+					#gpio-cells = <2>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+				};
+
+				gpio1: gpio at 1 {
+					compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
+					reg = <1>;
+					interrupts = <126>;
+					gpio-controller;
+					#gpio-cells = <2>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+				};
+
+				gpio2: gpio at 2 {
+					compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
+					reg = <2>;
+					interrupts = <125>;
+					gpio-controller;
+					#gpio-cells = <2>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+				};
+
+				gpio3: gpio at 3 {
+					compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
+					reg = <3>;
+					interrupts = <124>;
+					gpio-controller;
+					#gpio-cells = <2>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+				};
+
+				gpio4: gpio at 4 {
+					compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
+					reg = <4>;
+					interrupts = <123>;
+					gpio-controller;
+					#gpio-cells = <2>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+				};
+
+				duart_pins_a: duart at 0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_PWM0__DUART_RX
+						MX28_PAD_PWM1__DUART_TX
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				duart_pins_b: duart at 1 {
+					reg = <1>;
+					fsl,pinmux-ids = <
+						MX28_PAD_AUART0_CTS__DUART_RX
+						MX28_PAD_AUART0_RTS__DUART_TX
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				duart_4pins_a: duart-4pins at 0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_AUART0_CTS__DUART_RX
+						MX28_PAD_AUART0_RTS__DUART_TX
+						MX28_PAD_AUART0_RX__DUART_CTS
+						MX28_PAD_AUART0_TX__DUART_RTS
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				gpmi_pins_a: gpmi-nand at 0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_GPMI_D00__GPMI_D0
+						MX28_PAD_GPMI_D01__GPMI_D1
+						MX28_PAD_GPMI_D02__GPMI_D2
+						MX28_PAD_GPMI_D03__GPMI_D3
+						MX28_PAD_GPMI_D04__GPMI_D4
+						MX28_PAD_GPMI_D05__GPMI_D5
+						MX28_PAD_GPMI_D06__GPMI_D6
+						MX28_PAD_GPMI_D07__GPMI_D7
+						MX28_PAD_GPMI_CE0N__GPMI_CE0N
+						MX28_PAD_GPMI_RDY0__GPMI_READY0
+						MX28_PAD_GPMI_RDN__GPMI_RDN
+						MX28_PAD_GPMI_WRN__GPMI_WRN
+						MX28_PAD_GPMI_ALE__GPMI_ALE
+						MX28_PAD_GPMI_CLE__GPMI_CLE
+						MX28_PAD_GPMI_RESETN__GPMI_RESETN
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				gpmi_status_cfg: gpmi-status-cfg at 0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_GPMI_RDN__GPMI_RDN
+						MX28_PAD_GPMI_WRN__GPMI_WRN
+						MX28_PAD_GPMI_RESETN__GPMI_RESETN
+					>;
+					fsl,drive-strength = <MXS_DRIVE_12mA>;
+				};
+
+				auart0_pins_a: auart0 at 0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_AUART0_RX__AUART0_RX
+						MX28_PAD_AUART0_TX__AUART0_TX
+						MX28_PAD_AUART0_CTS__AUART0_CTS
+						MX28_PAD_AUART0_RTS__AUART0_RTS
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				auart0_2pins_a: auart0-2pins at 0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_AUART0_RX__AUART0_RX
+						MX28_PAD_AUART0_TX__AUART0_TX
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				auart1_pins_a: auart1 at 0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_AUART1_RX__AUART1_RX
+						MX28_PAD_AUART1_TX__AUART1_TX
+						MX28_PAD_AUART1_CTS__AUART1_CTS
+						MX28_PAD_AUART1_RTS__AUART1_RTS
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				auart1_2pins_a: auart1-2pins at 0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_AUART1_RX__AUART1_RX
+						MX28_PAD_AUART1_TX__AUART1_TX
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				auart2_2pins_a: auart2-2pins at 0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_SSP2_SCK__AUART2_RX
+						MX28_PAD_SSP2_MOSI__AUART2_TX
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				auart2_2pins_b: auart2-2pins at 1 {
+					reg = <1>;
+					fsl,pinmux-ids = <
+						MX28_PAD_AUART2_RX__AUART2_RX
+						MX28_PAD_AUART2_TX__AUART2_TX
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				auart2_pins_a: auart2-pins at 0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_AUART2_RX__AUART2_RX
+						MX28_PAD_AUART2_TX__AUART2_TX
+						MX28_PAD_AUART2_CTS__AUART2_CTS
+						MX28_PAD_AUART2_RTS__AUART2_RTS
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				auart3_pins_a: auart3 at 0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_AUART3_RX__AUART3_RX
+						MX28_PAD_AUART3_TX__AUART3_TX
+						MX28_PAD_AUART3_CTS__AUART3_CTS
+						MX28_PAD_AUART3_RTS__AUART3_RTS
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				auart3_2pins_a: auart3-2pins at 0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_SSP2_MISO__AUART3_RX
+						MX28_PAD_SSP2_SS0__AUART3_TX
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				auart3_2pins_b: auart3-2pins at 1 {
+					reg = <1>;
+					fsl,pinmux-ids = <
+						MX28_PAD_AUART3_RX__AUART3_RX
+						MX28_PAD_AUART3_TX__AUART3_TX
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				auart4_2pins_a: auart4 at 0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_SSP3_SCK__AUART4_TX
+						MX28_PAD_SSP3_MOSI__AUART4_RX
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				auart4_2pins_b: auart4 at 1 {
+					reg = <1>;
+					fsl,pinmux-ids = <
+						MX28_PAD_AUART0_CTS__AUART4_RX
+						MX28_PAD_AUART0_RTS__AUART4_TX
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				mac0_pins_a: mac0 at 0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_ENET0_MDC__ENET0_MDC
+						MX28_PAD_ENET0_MDIO__ENET0_MDIO
+						MX28_PAD_ENET0_RX_EN__ENET0_RX_EN
+						MX28_PAD_ENET0_RXD0__ENET0_RXD0
+						MX28_PAD_ENET0_RXD1__ENET0_RXD1
+						MX28_PAD_ENET0_TX_EN__ENET0_TX_EN
+						MX28_PAD_ENET0_TXD0__ENET0_TXD0
+						MX28_PAD_ENET0_TXD1__ENET0_TXD1
+						MX28_PAD_ENET_CLK__CLKCTRL_ENET
+					>;
+					fsl,drive-strength = <MXS_DRIVE_8mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
+				};
+
+				mac0_pins_b: mac0 at 1 {
+					reg = <1>;
+					fsl,pinmux-ids = <
+						MX28_PAD_ENET0_MDC__ENET0_MDC
+						MX28_PAD_ENET0_MDIO__ENET0_MDIO
+						MX28_PAD_ENET0_RX_EN__ENET0_RX_EN
+						MX28_PAD_ENET0_RXD0__ENET0_RXD0
+						MX28_PAD_ENET0_RXD1__ENET0_RXD1
+						MX28_PAD_ENET0_RXD2__ENET0_RXD2
+						MX28_PAD_ENET0_RXD3__ENET0_RXD3
+						MX28_PAD_ENET0_TX_EN__ENET0_TX_EN
+						MX28_PAD_ENET0_TXD0__ENET0_TXD0
+						MX28_PAD_ENET0_TXD1__ENET0_TXD1
+						MX28_PAD_ENET0_TXD2__ENET0_TXD2
+						MX28_PAD_ENET0_TXD3__ENET0_TXD3
+						MX28_PAD_ENET_CLK__CLKCTRL_ENET
+						MX28_PAD_ENET0_COL__ENET0_COL
+						MX28_PAD_ENET0_CRS__ENET0_CRS
+						MX28_PAD_ENET0_TX_CLK__ENET0_TX_CLK
+						MX28_PAD_ENET0_RX_CLK__ENET0_RX_CLK
+						>;
+					fsl,drive-strength = <MXS_DRIVE_8mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
+				};
+
+				mac1_pins_a: mac1 at 0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_ENET0_CRS__ENET1_RX_EN
+						MX28_PAD_ENET0_RXD2__ENET1_RXD0
+						MX28_PAD_ENET0_RXD3__ENET1_RXD1
+						MX28_PAD_ENET0_COL__ENET1_TX_EN
+						MX28_PAD_ENET0_TXD2__ENET1_TXD0
+						MX28_PAD_ENET0_TXD3__ENET1_TXD1
+					>;
+					fsl,drive-strength = <MXS_DRIVE_8mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
+				};
+
+				mmc0_8bit_pins_a: mmc0-8bit at 0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_SSP0_DATA0__SSP0_D0
+						MX28_PAD_SSP0_DATA1__SSP0_D1
+						MX28_PAD_SSP0_DATA2__SSP0_D2
+						MX28_PAD_SSP0_DATA3__SSP0_D3
+						MX28_PAD_SSP0_DATA4__SSP0_D4
+						MX28_PAD_SSP0_DATA5__SSP0_D5
+						MX28_PAD_SSP0_DATA6__SSP0_D6
+						MX28_PAD_SSP0_DATA7__SSP0_D7
+						MX28_PAD_SSP0_CMD__SSP0_CMD
+						MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT
+						MX28_PAD_SSP0_SCK__SSP0_SCK
+					>;
+					fsl,drive-strength = <MXS_DRIVE_8mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
+				};
+
+				mmc0_4bit_pins_a: mmc0-4bit at 0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_SSP0_DATA0__SSP0_D0
+						MX28_PAD_SSP0_DATA1__SSP0_D1
+						MX28_PAD_SSP0_DATA2__SSP0_D2
+						MX28_PAD_SSP0_DATA3__SSP0_D3
+						MX28_PAD_SSP0_CMD__SSP0_CMD
+						MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT
+						MX28_PAD_SSP0_SCK__SSP0_SCK
+					>;
+					fsl,drive-strength = <MXS_DRIVE_8mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
+				};
+
+				mmc0_cd_cfg: mmc0-cd-cfg at 0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT
+					>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				mmc0_sck_cfg: mmc0-sck-cfg at 0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_SSP0_SCK__SSP0_SCK
+					>;
+					fsl,drive-strength = <MXS_DRIVE_12mA>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				mmc1_4bit_pins_a: mmc1-4bit at 0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_GPMI_D00__SSP1_D0
+						MX28_PAD_GPMI_D01__SSP1_D1
+						MX28_PAD_GPMI_D02__SSP1_D2
+						MX28_PAD_GPMI_D03__SSP1_D3
+						MX28_PAD_GPMI_RDY1__SSP1_CMD
+						MX28_PAD_GPMI_RDY0__SSP1_CARD_DETECT
+						MX28_PAD_GPMI_WRN__SSP1_SCK
+					>;
+					fsl,drive-strength = <MXS_DRIVE_8mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
+				};
+
+				mmc1_cd_cfg: mmc1-cd-cfg at 0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_GPMI_RDY0__SSP1_CARD_DETECT
+					>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				mmc1_sck_cfg: mmc1-sck-cfg at 0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_GPMI_WRN__SSP1_SCK
+					>;
+					fsl,drive-strength = <MXS_DRIVE_12mA>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+
+				mmc2_4bit_pins_a: mmc2-4bit at 0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_SSP0_DATA4__SSP2_D0
+						MX28_PAD_SSP1_SCK__SSP2_D1
+						MX28_PAD_SSP1_CMD__SSP2_D2
+						MX28_PAD_SSP0_DATA5__SSP2_D3
+						MX28_PAD_SSP0_DATA6__SSP2_CMD
+						MX28_PAD_AUART1_RX__SSP2_CARD_DETECT
+						MX28_PAD_SSP0_DATA7__SSP2_SCK
+					>;
+					fsl,drive-strength = <MXS_DRIVE_8mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
+				};
+
+				mmc2_4bit_pins_b: mmc2-4bit at 1 {
+					reg = <1>;
+					fsl,pinmux-ids = <
+						MX28_PAD_SSP2_SCK__SSP2_SCK
+						MX28_PAD_SSP2_MOSI__SSP2_CMD
+						MX28_PAD_SSP2_MISO__SSP2_D0
+						MX28_PAD_SSP2_SS0__SSP2_D3
+						MX28_PAD_SSP2_SS1__SSP2_D1
+						MX28_PAD_SSP2_SS2__SSP2_D2
+						MX28_PAD_AUART1_RX__SSP2_CARD_DETECT
+					>;
+					fsl,drive-strength = <MXS_DRIVE_8mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
+				};
+
+				mmc2_cd_cfg: mmc2-cd-cfg at 0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_AUART1_RX__SSP2_CARD_DETECT
+					>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				mmc2_sck_cfg_a: mmc2-sck-cfg at 0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_SSP0_DATA7__SSP2_SCK
+					>;
+					fsl,drive-strength = <MXS_DRIVE_12mA>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				mmc2_sck_cfg_b: mmc2-sck-cfg at 1 {
+					reg = <1>;
+					fsl,pinmux-ids = <
+						MX28_PAD_SSP2_SCK__SSP2_SCK
+					>;
+					fsl,drive-strength = <MXS_DRIVE_12mA>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				i2c0_pins_a: i2c0 at 0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_I2C0_SCL__I2C0_SCL
+						MX28_PAD_I2C0_SDA__I2C0_SDA
+					>;
+					fsl,drive-strength = <MXS_DRIVE_8mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
+				};
+
+				i2c0_pins_b: i2c0 at 1 {
+					reg = <1>;
+					fsl,pinmux-ids = <
+						MX28_PAD_AUART0_RX__I2C0_SCL
+						MX28_PAD_AUART0_TX__I2C0_SDA
+					>;
+					fsl,drive-strength = <MXS_DRIVE_8mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
+				};
+
+				i2c1_pins_a: i2c1 at 0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_PWM0__I2C1_SCL
+						MX28_PAD_PWM1__I2C1_SDA
+					>;
+					fsl,drive-strength = <MXS_DRIVE_8mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
+				};
+
+				i2c1_pins_b: i2c1 at 1 {
+					reg = <1>;
+					fsl,pinmux-ids = <
+						MX28_PAD_AUART2_CTS__I2C1_SCL
+						MX28_PAD_AUART2_RTS__I2C1_SDA
+					>;
+					fsl,drive-strength = <MXS_DRIVE_8mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
+				};
+
+				saif0_pins_a: saif0 at 0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_SAIF0_MCLK__SAIF0_MCLK
+						MX28_PAD_SAIF0_LRCLK__SAIF0_LRCLK
+						MX28_PAD_SAIF0_BITCLK__SAIF0_BITCLK
+						MX28_PAD_SAIF0_SDATA0__SAIF0_SDATA0
+					>;
+					fsl,drive-strength = <MXS_DRIVE_12mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
+				};
+
+				saif0_pins_b: saif0 at 1 {
+					reg = <1>;
+					fsl,pinmux-ids = <
+						MX28_PAD_SAIF0_LRCLK__SAIF0_LRCLK
+						MX28_PAD_SAIF0_BITCLK__SAIF0_BITCLK
+						MX28_PAD_SAIF0_SDATA0__SAIF0_SDATA0
+					>;
+					fsl,drive-strength = <MXS_DRIVE_12mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
+				};
+
+				saif1_pins_a: saif1 at 0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_SAIF1_SDATA0__SAIF1_SDATA0
+					>;
+					fsl,drive-strength = <MXS_DRIVE_12mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
+				};
+
+				pwm0_pins_a: pwm0 at 0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_PWM0__PWM_0
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				pwm2_pins_a: pwm2 at 0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_PWM2__PWM_2
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				pwm3_pins_a: pwm3 at 0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_PWM3__PWM_3
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				pwm3_pins_b: pwm3 at 1 {
+					reg = <1>;
+					fsl,pinmux-ids = <
+						MX28_PAD_SAIF0_MCLK__PWM_3
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				pwm4_pins_a: pwm4 at 0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_PWM4__PWM_4
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				lcdif_24bit_pins_a: lcdif-24bit at 0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_LCD_D00__LCD_D0
+						MX28_PAD_LCD_D01__LCD_D1
+						MX28_PAD_LCD_D02__LCD_D2
+						MX28_PAD_LCD_D03__LCD_D3
+						MX28_PAD_LCD_D04__LCD_D4
+						MX28_PAD_LCD_D05__LCD_D5
+						MX28_PAD_LCD_D06__LCD_D6
+						MX28_PAD_LCD_D07__LCD_D7
+						MX28_PAD_LCD_D08__LCD_D8
+						MX28_PAD_LCD_D09__LCD_D9
+						MX28_PAD_LCD_D10__LCD_D10
+						MX28_PAD_LCD_D11__LCD_D11
+						MX28_PAD_LCD_D12__LCD_D12
+						MX28_PAD_LCD_D13__LCD_D13
+						MX28_PAD_LCD_D14__LCD_D14
+						MX28_PAD_LCD_D15__LCD_D15
+						MX28_PAD_LCD_D16__LCD_D16
+						MX28_PAD_LCD_D17__LCD_D17
+						MX28_PAD_LCD_D18__LCD_D18
+						MX28_PAD_LCD_D19__LCD_D19
+						MX28_PAD_LCD_D20__LCD_D20
+						MX28_PAD_LCD_D21__LCD_D21
+						MX28_PAD_LCD_D22__LCD_D22
+						MX28_PAD_LCD_D23__LCD_D23
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				lcdif_18bit_pins_a: lcdif-18bit at 0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_LCD_D00__LCD_D0
+						MX28_PAD_LCD_D01__LCD_D1
+						MX28_PAD_LCD_D02__LCD_D2
+						MX28_PAD_LCD_D03__LCD_D3
+						MX28_PAD_LCD_D04__LCD_D4
+						MX28_PAD_LCD_D05__LCD_D5
+						MX28_PAD_LCD_D06__LCD_D6
+						MX28_PAD_LCD_D07__LCD_D7
+						MX28_PAD_LCD_D08__LCD_D8
+						MX28_PAD_LCD_D09__LCD_D9
+						MX28_PAD_LCD_D10__LCD_D10
+						MX28_PAD_LCD_D11__LCD_D11
+						MX28_PAD_LCD_D12__LCD_D12
+						MX28_PAD_LCD_D13__LCD_D13
+						MX28_PAD_LCD_D14__LCD_D14
+						MX28_PAD_LCD_D15__LCD_D15
+						MX28_PAD_LCD_D16__LCD_D16
+						MX28_PAD_LCD_D17__LCD_D17
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				lcdif_16bit_pins_a: lcdif-16bit at 0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_LCD_D00__LCD_D0
+						MX28_PAD_LCD_D01__LCD_D1
+						MX28_PAD_LCD_D02__LCD_D2
+						MX28_PAD_LCD_D03__LCD_D3
+						MX28_PAD_LCD_D04__LCD_D4
+						MX28_PAD_LCD_D05__LCD_D5
+						MX28_PAD_LCD_D06__LCD_D6
+						MX28_PAD_LCD_D07__LCD_D7
+						MX28_PAD_LCD_D08__LCD_D8
+						MX28_PAD_LCD_D09__LCD_D9
+						MX28_PAD_LCD_D10__LCD_D10
+						MX28_PAD_LCD_D11__LCD_D11
+						MX28_PAD_LCD_D12__LCD_D12
+						MX28_PAD_LCD_D13__LCD_D13
+						MX28_PAD_LCD_D14__LCD_D14
+						MX28_PAD_LCD_D15__LCD_D15
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				lcdif_sync_pins_a: lcdif-sync at 0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_LCD_RS__LCD_DOTCLK
+						MX28_PAD_LCD_CS__LCD_ENABLE
+						MX28_PAD_LCD_RD_E__LCD_VSYNC
+						MX28_PAD_LCD_WR_RWN__LCD_HSYNC
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				can0_pins_a: can0 at 0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_GPMI_RDY2__CAN0_TX
+						MX28_PAD_GPMI_RDY3__CAN0_RX
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				can1_pins_a: can1 at 0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_GPMI_CE2N__CAN1_TX
+						MX28_PAD_GPMI_CE3N__CAN1_RX
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				spi2_pins_a: spi2 at 0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_SSP2_SCK__SSP2_SCK
+						MX28_PAD_SSP2_MOSI__SSP2_CMD
+						MX28_PAD_SSP2_MISO__SSP2_D0
+						MX28_PAD_SSP2_SS0__SSP2_D3
+					>;
+					fsl,drive-strength = <MXS_DRIVE_8mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
+				};
+
+				spi3_pins_a: spi3 at 0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_AUART2_RX__SSP3_D4
+						MX28_PAD_AUART2_TX__SSP3_D5
+						MX28_PAD_SSP3_SCK__SSP3_SCK
+						MX28_PAD_SSP3_MOSI__SSP3_CMD
+						MX28_PAD_SSP3_MISO__SSP3_D0
+						MX28_PAD_SSP3_SS0__SSP3_D3
+					>;
+					fsl,drive-strength = <MXS_DRIVE_8mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				spi3_pins_b: spi3 at 1 {
+					reg = <1>;
+					fsl,pinmux-ids = <
+						MX28_PAD_SSP3_SCK__SSP3_SCK
+						MX28_PAD_SSP3_MOSI__SSP3_CMD
+						MX28_PAD_SSP3_MISO__SSP3_D0
+						MX28_PAD_SSP3_SS0__SSP3_D3
+					>;
+					fsl,drive-strength = <MXS_DRIVE_8mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
+				};
+
+				usb0_pins_a: usb0 at 0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_SSP2_SS2__USB0_OVERCURRENT
+					>;
+					fsl,drive-strength = <MXS_DRIVE_12mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				usb0_pins_b: usb0 at 1 {
+					reg = <1>;
+					fsl,pinmux-ids = <
+						MX28_PAD_AUART1_CTS__USB0_OVERCURRENT
+					>;
+					fsl,drive-strength = <MXS_DRIVE_12mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				usb1_pins_a: usb1 at 0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_SSP2_SS1__USB1_OVERCURRENT
+					>;
+					fsl,drive-strength = <MXS_DRIVE_12mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				usb0_id_pins_a: usb0id at 0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_AUART1_RTS__USB0_ID
+					>;
+					fsl,drive-strength = <MXS_DRIVE_12mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
+				};
+
+				usb0_id_pins_b: usb0id1 at 0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_PWM2__USB0_ID
+					>;
+					fsl,drive-strength = <MXS_DRIVE_12mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
+				};
+
+			};
+
+			digctl: digctl at 8001c000 {
+				compatible = "fsl,imx28-digctl", "fsl,imx23-digctl";
+				reg = <0x8001c000 0x2000>;
+				interrupts = <89>;
+				status = "disabled";
+			};
+
+			etm: etm at 80022000 {
+				reg = <0x80022000 0x2000>;
+				status = "disabled";
+			};
+
+			dma_apbx: dma-apbx at 80024000 {
+				compatible = "fsl,imx28-dma-apbx";
+				reg = <0x80024000 0x2000>;
+				interrupts = <78 79 66 0
+					      80 81 68 69
+					      70 71 72 73
+					      74 75 76 77>;
+				interrupt-names = "auart4-rx", "auart4-tx", "spdif-tx", "empty",
+						  "saif0", "saif1", "i2c0", "i2c1",
+						  "auart0-rx", "auart0-tx", "auart1-rx", "auart1-tx",
+						  "auart2-rx", "auart2-tx", "auart3-rx", "auart3-tx";
+				#dma-cells = <1>;
+				dma-channels = <16>;
+				clocks = <&clks 26>;
+			};
+
+			dcp: dcp at 80028000 {
+				compatible = "fsl,imx28-dcp", "fsl,imx23-dcp";
+				reg = <0x80028000 0x2000>;
+				interrupts = <52 53 54>;
+				status = "okay";
+			};
+
+			pxp: pxp at 8002a000 {
+				reg = <0x8002a000 0x2000>;
+				interrupts = <39>;
+				status = "disabled";
+			};
+
+			ocotp: ocotp at 8002c000 {
+				compatible = "fsl,imx28-ocotp", "fsl,ocotp";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0x8002c000 0x2000>;
+				clocks = <&clks 25>;
+			};
+
+			axi-ahb at 8002e000 {
+				reg = <0x8002e000 0x2000>;
+				status = "disabled";
+			};
+
+			lcdif: lcdif at 80030000 {
+				compatible = "fsl,imx28-lcdif";
+				reg = <0x80030000 0x2000>;
+				interrupts = <38>;
+				clocks = <&clks 55>;
+				dmas = <&dma_apbh 13>;
+				dma-names = "rx";
+				status = "disabled";
+			};
+
+			can0: can at 80032000 {
+				compatible = "fsl,imx28-flexcan";
+				reg = <0x80032000 0x2000>;
+				interrupts = <8>;
+				clocks = <&clks 58>, <&clks 58>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			can1: can at 80034000 {
+				compatible = "fsl,imx28-flexcan";
+				reg = <0x80034000 0x2000>;
+				interrupts = <9>;
+				clocks = <&clks 59>, <&clks 59>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			simdbg: simdbg at 8003c000 {
+				reg = <0x8003c000 0x200>;
+				status = "disabled";
+			};
+
+			simgpmisel: simgpmisel at 8003c200 {
+				reg = <0x8003c200 0x100>;
+				status = "disabled";
+			};
+
+			simsspsel: simsspsel at 8003c300 {
+				reg = <0x8003c300 0x100>;
+				status = "disabled";
+			};
+
+			simmemsel: simmemsel at 8003c400 {
+				reg = <0x8003c400 0x100>;
+				status = "disabled";
+			};
+
+			gpiomon: gpiomon at 8003c500 {
+				reg = <0x8003c500 0x100>;
+				status = "disabled";
+			};
+
+			simenet: simenet at 8003c700 {
+				reg = <0x8003c700 0x100>;
+				status = "disabled";
+			};
+
+			armjtag: armjtag at 8003c800 {
+				reg = <0x8003c800 0x100>;
+				status = "disabled";
+			};
+		};
+
+		apbx at 80040000 {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x80040000 0x40000>;
+			ranges;
+
+			clks: clkctrl at 80040000 {
+				compatible = "fsl,imx28-clkctrl", "fsl,clkctrl";
+				reg = <0x80040000 0x2000>;
+				#clock-cells = <1>;
+			};
+
+			saif0: saif at 80042000 {
+				#sound-dai-cells = <0>;
+				compatible = "fsl,imx28-saif";
+				reg = <0x80042000 0x2000>;
+				interrupts = <59>;
+				#clock-cells = <0>;
+				clocks = <&clks 53>;
+				dmas = <&dma_apbx 4>;
+				dma-names = "rx-tx";
+				status = "disabled";
+			};
+
+			power: power at 80044000 {
+				reg = <0x80044000 0x2000>;
+				status = "disabled";
+			};
+
+			saif1: saif at 80046000 {
+				#sound-dai-cells = <0>;
+				compatible = "fsl,imx28-saif";
+				reg = <0x80046000 0x2000>;
+				interrupts = <58>;
+				clocks = <&clks 54>;
+				dmas = <&dma_apbx 5>;
+				dma-names = "rx-tx";
+				status = "disabled";
+			};
+
+			lradc: lradc at 80050000 {
+				compatible = "fsl,imx28-lradc";
+				reg = <0x80050000 0x2000>;
+				interrupts = <10 14 15 16 17 18 19
+						20 21 22 23 24 25>;
+				status = "disabled";
+				clocks = <&clks 41>;
+				#io-channel-cells = <1>;
+			};
+
+			spdif: spdif at 80054000 {
+				reg = <0x80054000 0x2000>;
+				interrupts = <45>;
+				dmas = <&dma_apbx 2>;
+				dma-names = "tx";
+				status = "disabled";
+			};
+
+			mxs_rtc: rtc at 80056000 {
+				compatible = "fsl,imx28-rtc", "fsl,stmp3xxx-rtc";
+				reg = <0x80056000 0x2000>;
+				interrupts = <29>;
+			};
+
+			i2c0: i2c at 80058000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx28-i2c";
+				reg = <0x80058000 0x2000>;
+				interrupts = <111>;
+				clock-frequency = <100000>;
+				dmas = <&dma_apbx 6>;
+				dma-names = "rx-tx";
+				status = "disabled";
+			};
+
+			i2c1: i2c at 8005a000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx28-i2c";
+				reg = <0x8005a000 0x2000>;
+				interrupts = <110>;
+				clock-frequency = <100000>;
+				dmas = <&dma_apbx 7>;
+				dma-names = "rx-tx";
+				status = "disabled";
+			};
+
+			pwm: pwm at 80064000 {
+				compatible = "fsl,imx28-pwm", "fsl,imx23-pwm";
+				reg = <0x80064000 0x2000>;
+				clocks = <&clks 44>;
+				#pwm-cells = <2>;
+				fsl,pwm-number = <8>;
+				status = "disabled";
+			};
+
+			timer: timrot at 80068000 {
+				compatible = "fsl,imx28-timrot", "fsl,timrot";
+				reg = <0x80068000 0x2000>;
+				interrupts = <48 49 50 51>;
+				clocks = <&clks 26>;
+			};
+
+			auart0: serial at 8006a000 {
+				compatible = "fsl,imx28-auart", "fsl,imx23-auart";
+				reg = <0x8006a000 0x2000>;
+				interrupts = <112>;
+				dmas = <&dma_apbx 8>, <&dma_apbx 9>;
+				dma-names = "rx", "tx";
+				clocks = <&clks 45>;
+				status = "disabled";
+			};
+
+			auart1: serial at 8006c000 {
+				compatible = "fsl,imx28-auart", "fsl,imx23-auart";
+				reg = <0x8006c000 0x2000>;
+				interrupts = <113>;
+				dmas = <&dma_apbx 10>, <&dma_apbx 11>;
+				dma-names = "rx", "tx";
+				clocks = <&clks 45>;
+				status = "disabled";
+			};
+
+			auart2: serial at 8006e000 {
+				compatible = "fsl,imx28-auart", "fsl,imx23-auart";
+				reg = <0x8006e000 0x2000>;
+				interrupts = <114>;
+				dmas = <&dma_apbx 12>, <&dma_apbx 13>;
+				dma-names = "rx", "tx";
+				clocks = <&clks 45>;
+				status = "disabled";
+			};
+
+			auart3: serial at 80070000 {
+				compatible = "fsl,imx28-auart", "fsl,imx23-auart";
+				reg = <0x80070000 0x2000>;
+				interrupts = <115>;
+				dmas = <&dma_apbx 14>, <&dma_apbx 15>;
+				dma-names = "rx", "tx";
+				clocks = <&clks 45>;
+				status = "disabled";
+			};
+
+			auart4: serial at 80072000 {
+				compatible = "fsl,imx28-auart", "fsl,imx23-auart";
+				reg = <0x80072000 0x2000>;
+				interrupts = <116>;
+				dmas = <&dma_apbx 0>, <&dma_apbx 1>;
+				dma-names = "rx", "tx";
+				clocks = <&clks 45>;
+				status = "disabled";
+			};
+
+			duart: serial at 80074000 {
+				compatible = "arm,pl011", "arm,primecell";
+				reg = <0x80074000 0x1000>;
+				interrupts = <47>;
+				clocks = <&clks 45>, <&clks 26>;
+				clock-names = "uart", "apb_pclk";
+				status = "disabled";
+			};
+
+			usbphy0: usbphy at 8007c000 {
+				compatible = "fsl,imx28-usbphy", "fsl,imx23-usbphy";
+				reg = <0x8007c000 0x2000>;
+				clocks = <&clks 62>;
+				status = "disabled";
+			};
+
+			usbphy1: usbphy at 8007e000 {
+				compatible = "fsl,imx28-usbphy", "fsl,imx23-usbphy";
+				reg = <0x8007e000 0x2000>;
+				clocks = <&clks 63>;
+				status = "disabled";
+			};
+		};
+	};
+
+	ahb at 80080000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x80080000 0x80000>;
+		ranges;
+
+		usb0: usb at 80080000 {
+			compatible = "fsl,imx28-usb", "fsl,imx27-usb";
+			reg = <0x80080000 0x10000>;
+			interrupts = <93>;
+			clocks = <&clks 60>;
+			fsl,usbphy = <&usbphy0>;
+			status = "disabled";
+		};
+
+		usb1: usb at 80090000 {
+			compatible = "fsl,imx28-usb", "fsl,imx27-usb";
+			reg = <0x80090000 0x10000>;
+			interrupts = <92>;
+			clocks = <&clks 61>;
+			fsl,usbphy = <&usbphy1>;
+			dr_mode = "host";
+			status = "disabled";
+		};
+
+		dflpt: dflpt at 800c0000 {
+			reg = <0x800c0000 0x10000>;
+			status = "disabled";
+		};
+
+		mac0: ethernet at 800f0000 {
+			compatible = "fsl,imx28-fec";
+			reg = <0x800f0000 0x4000>;
+			interrupts = <101>;
+			clocks = <&clks 57>, <&clks 57>, <&clks 64>;
+			clock-names = "ipg", "ahb", "enet_out";
+			status = "disabled";
+		};
+
+		mac1: ethernet at 800f4000 {
+			compatible = "fsl,imx28-fec";
+			reg = <0x800f4000 0x4000>;
+			interrupts = <102>;
+			clocks = <&clks 57>, <&clks 57>;
+			clock-names = "ipg", "ahb";
+			status = "disabled";
+		};
+
+		etn_switch: switch at 800f8000 {
+			reg = <0x800f8000 0x8000>;
+			status = "disabled";
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&lradc 8>;
+	};
+};
diff --git a/arch/arm/dts/mxs-pinfunc.h b/arch/arm/dts/mxs-pinfunc.h
new file mode 100644
index 0000000000..c6da987b20
--- /dev/null
+++ b/arch/arm/dts/mxs-pinfunc.h
@@ -0,0 +1,31 @@
+/*
+ * Header providing constants for i.MX28 pinctrl bindings.
+ *
+ * Copyright (C) 2013 Lothar Waßmann <LW at KARO-electronics.de>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#ifndef __DT_BINDINGS_MXS_PINCTRL_H__
+#define __DT_BINDINGS_MXS_PINCTRL_H__
+
+/* fsl,drive-strength property */
+#define MXS_DRIVE_4mA		0
+#define MXS_DRIVE_8mA		1
+#define MXS_DRIVE_12mA		2
+#define MXS_DRIVE_16mA		3
+
+/* fsl,voltage property */
+#define MXS_VOLTAGE_LOW		0
+#define MXS_VOLTAGE_HIGH	1
+
+/* fsl,pull-up property */
+#define MXS_PULL_DISABLE	0
+#define MXS_PULL_ENABLE		1
+
+#endif /* __DT_BINDINGS_MXS_PINCTRL_H__ */
-- 
2.11.0



More information about the U-Boot mailing list