[U-Boot] [PATCH v3 2/5] ARM: imx: net: Enable support for i.MX28 DM_ETH in the fec_mxc.c driver

Marek Vasut marex at denx.de
Sat Jun 15 22:43:55 UTC 2019


On 6/16/19 12:34 AM, Lukasz Majewski wrote:
> The fec_mxc.c driver can be reused by i.MX28 when DM_ETH is enabled.
> One only needs to add proper compatible and dependency on FEC_MXC in the
> Kconfig.
> 
> Signed-off-by: Lukasz Majewski <lukma at denx.de>
> ---
> 
> Changes in v3:
> - Set more apropriate tags
> 
> Changes in v2: None
> 
>  drivers/net/Kconfig   | 2 +-
>  drivers/net/fec_mxc.c | 1 +
>  2 files changed, 2 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
> index e6a4fdf30e..04f886fe86 100644
> --- a/drivers/net/Kconfig
> +++ b/drivers/net/Kconfig
> @@ -190,7 +190,7 @@ config FEC_MXC_MDIO_BASE
>  
>  config FEC_MXC
>  	bool "FEC Ethernet controller"
> -	depends on MX5 || MX6 || MX7 || IMX8 || VF610
> +	depends on MX5 || MX6 || MX7 || IMX8 || VF610 || MX28

Keep the list sorted -- IMX28 goes at the beginning

>  	help
>  	  This driver supports the 10/100 Fast Ethernet controller for
>  	  NXP i.MX processors.
> diff --git a/drivers/net/fec_mxc.c b/drivers/net/fec_mxc.c
> index d7c080943a..4042dcf9ca 100644
> --- a/drivers/net/fec_mxc.c
> +++ b/drivers/net/fec_mxc.c
> @@ -1492,6 +1492,7 @@ static const struct udevice_id fecmxc_ids[] = {
>  	{ .compatible = "fsl,imx53-fec" },
>  	{ .compatible = "fsl,imx7d-fec" },
>  	{ .compatible = "fsl,mvf600-fec" },
> +	{ .compatible = "fsl,imx28-fec" },

Keep this list sorted too.

>  	{ }
>  };
>  
> 


-- 
Best regards,
Marek Vasut


More information about the U-Boot mailing list