[U-Boot] [PATCH v2 88/99] ram: rk3399: Add set_rate sdram rk3399 ops

[Jagan Teki]

DDR set rate can be even required for lpddr4 and we
need to keep the lpddr4 code to compile only for relevant
boards which do support lpddr4.

For this requirement, and for code readability handle
data training via sdram_rk3399_ops with .set_rate and
same will update in future while supporting lpddr4 code.

Signed-off-by: Jagan Teki <jagan at amarulasolutions.com>
---
 drivers/ram/rockchip/sdram_rk3399.c | 11 ++++++++---
 1 file changed, 8 insertions(+), 3 deletions(-)

diff --git a/drivers/ram/rockchip/sdram_rk3399.c b/drivers/ram/rockchip/sdram_rk3399.c
index cdae6b9e67..9f5438a0bc 100644
--- a/drivers/ram/rockchip/sdram_rk3399.c
+++ b/drivers/ram/rockchip/sdram_rk3399.c
@@ -74,6 +74,8 @@ struct dram_info {
 struct sdram_rk3399_ops {
 	int (*data_training)(struct dram_info *dram, u32 channel, u8 rank,
 			     struct rk3399_sdram_params *sdram);
+	int (*set_rate)(struct dram_info *dram,
+			const struct rk3399_sdram_params *params);
 };
 
 #if defined(CONFIG_TPL_BUILD) || \
@@ -948,6 +950,7 @@ static int pctl_cfg(struct dram_info *dram, const struct chan_info *chan,
 	return 0;
 }
 
+#if !defined(CONFIG_RAM_RK3399_LPDDR4)
 static void select_per_cs_training_index(const struct chan_info *chan,
 					 u32 rank)
 {
@@ -1368,6 +1371,7 @@ static int data_training(struct dram_info *dram, u32 channel,
 
 	return 0;
 }
+#endif
 
 static void set_ddrconfig(const struct chan_info *chan,
 			  const struct rk3399_sdram_params *params,
@@ -1488,7 +1492,6 @@ static int default_data_training(struct dram_info *dram, u32 channel, u8 rank,
 
 	return data_training(dram, channel, params, training_flag);
 }
-#endif
 
 static int switch_to_phy_index1(struct dram_info *dram,
 				const struct rk3399_sdram_params *params)
@@ -1535,7 +1538,8 @@ static int switch_to_phy_index1(struct dram_info *dram,
 	return 0;
 }
 
-#if defined(CONFIG_RAM_RK3399_LPDDR4)
+#else
+
 static u32 get_ddr_stride(struct rk3399_pmusgrf_regs *pmusgrf)
 {
 	return ((readl(&pmusgrf->soc_con4) >> 10) & 0x1F);
@@ -1939,7 +1943,7 @@ static int sdram_init(struct dram_info *dram,
 
 	params->base.stride = calculate_stride(params);
 	dram_all_config(dram, params);
-	switch_to_phy_index1(dram, params);
+	dram->ops->set_rate(dram, params);
 
 	debug("Finish SDRAM initialization...\n");
 	return 0;
@@ -1987,6 +1991,7 @@ static int conv_of_platdata(struct udevice *dev)
 static const struct sdram_rk3399_ops rk3399_ops = {
 #if !defined(CONFIG_RAM_RK3399_LPDDR4)
 	.data_training = default_data_training,
+	.set_rate = switch_to_phy_index1,
 #else
 	.data_training = lpddr4_mr_detect,
 #endif
-- 
2.18.0.321.gffc6fa0e3