[U-Boot] [PATCH] arm: dts: imx: fsl-imx8dx.dtsi: add gpio aliases to fix gpio command
Anatolij Gustschin
agust at denx.de
Mon Jun 17 13:38:58 UTC 2019
The gpio command currently uses equal bank names "GPIO0_"
for all existing gpio banks, i. e.:
U-Boot# gpio status -a
Bank GPIO0_:
GPIO0_0: input: 0 [ ]
GPIO0_1: output: 1 [x] dbg1.gpios
...
Bank GPIO0_:
GPIO0_0: input: 0 [ ]
GPIO0_1: input: 0 [ ]
...
So the command is broken, it is not possible to address
a desired bank. Add gpio aliases to fix this.
Signed-off-by: Anatolij Gustschin <agust at denx.de>
---
arch/arm/dts/fsl-imx8dx.dtsi | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/arch/arm/dts/fsl-imx8dx.dtsi b/arch/arm/dts/fsl-imx8dx.dtsi
index 715abb413d..1c3ca999e2 100644
--- a/arch/arm/dts/fsl-imx8dx.dtsi
+++ b/arch/arm/dts/fsl-imx8dx.dtsi
@@ -30,6 +30,14 @@
i2c1 = &i2c1;
i2c2 = &i2c2;
i2c3 = &i2c3;
+ gpio0 = &gpio0;
+ gpio1 = &gpio1;
+ gpio2 = &gpio2;
+ gpio3 = &gpio3;
+ gpio4 = &gpio4;
+ gpio5 = &gpio5;
+ gpio6 = &gpio6;
+ gpio7 = &gpio7;
};
memory at 80000000 {
--
2.17.1
More information about the U-Boot
mailing list