[U-Boot] [PATCH v1] test/py: add MMC/SD block write test
Jean-Jacques Hiblot
jjhiblot at ti.com
Mon Jun 17 15:49:21 UTC 2019
Add a standalone MMC block write test. This allows direct testing of MMC
access rather than relying on doing so as a side-effect of e.g. DFU or
UMS testing, which may not be enabled on all platforms.
Signed-off-by: Jean-Jacques Hiblot <jjhiblot at ti.com>
---
This patch relies on patch "cmd: mem: Add a command to fill the memory
with random data".
test/py/tests/test_mmc_wr.py | 105 +++++++++++++++++++++++++++++++++++
1 file changed, 105 insertions(+)
create mode 100644 test/py/tests/test_mmc_wr.py
diff --git a/test/py/tests/test_mmc_wr.py b/test/py/tests/test_mmc_wr.py
new file mode 100644
index 0000000000..601279a6a4
--- /dev/null
+++ b/test/py/tests/test_mmc_wr.py
@@ -0,0 +1,105 @@
+# SPDX-License-Identifier: GPL-2.0
+# Copyright (c) 2019, Texas Instrument
+# Author: Jean-Jacques Hiblot <jjhiblot at ti.com>
+
+# Test U-Boot's "mmc write" command. The test generates random data, writes it
+# to the eMMC or SD card, then reads it back and performs a comparison.
+
+import pytest
+import u_boot_utils
+
+"""
+This test relies on boardenv_* to containing configuration values to define
+which MMC devices should be tested. For example:
+
+env__mmc_wr_configs = (
+ {
+ "fixture_id": "emmc-boot0",
+ "is_emmc": True,
+ "devid": 1,
+ "partid": 1,
+ "sector": 0x10,
+ "count": 100,
+ "test_iterations": 50,
+ },
+ {
+ "fixture_id": "emmc-boot1",
+ "is_emmc": True,
+ "devid": 1,
+ "partid": 2,
+ "sector": 0x10,
+ "count": 100,
+ "test_iterations": 50,
+ },
+)
+
+"""
+
+ at pytest.mark.buildconfigspec('cmd_mmc','cmd_memory')
+def test_mmc_wr(u_boot_console, env__mmc_wr_config):
+ """Test the "mmc write" command.
+
+ Args:
+ u_boot_console: A U-Boot console connection.
+ env__mmc_wr_config: The single MMC configuration on which
+ to run the test. See the file-level comment above for details
+ of the format.
+
+ Returns:
+ Nothing.
+ """
+
+ is_emmc = env__mmc_wr_config['is_emmc']
+ devid = env__mmc_wr_config['devid']
+ partid = env__mmc_wr_config.get('partid', 0)
+ sector = env__mmc_wr_config.get('sector', 0)
+ count_sectors = env__mmc_wr_config.get('count', 1)
+ test_iterations = env__mmc_wr_config.get('test_iterations', 1)
+
+
+ count_bytes = count_sectors * 512
+ bcfg = u_boot_console.config.buildconfig
+ ram_base = u_boot_utils.find_ram_base(u_boot_console)
+ src_addr = '0x%08x' % ram_base
+ dst_addr = '0x%08x' % (ram_base + count_bytes)
+
+
+ for i in range(test_iterations):
+ # Generate random data
+ cmd = 'random %s %x' % (src_addr, count_bytes)
+ response = u_boot_console.run_command(cmd)
+ good_response = '%d bytes filled with random data' % (count_bytes)
+ assert good_response in response
+
+ # Select MMC device
+ cmd = 'mmc dev %d' % devid
+ if is_emmc:
+ cmd += ' %d' % partid
+ response = u_boot_console.run_command(cmd)
+ assert 'no card present' not in response
+ if is_emmc:
+ partid_response = "(part %d)" % partid
+ else:
+ partid_response = ""
+ good_response = 'mmc%d%s is current device' % (devid, partid_response)
+ assert good_response in response
+
+ # Write data
+ cmd = 'mmc write %s %x %x' % (src_addr, sector, count_sectors)
+ response = u_boot_console.run_command(cmd)
+ good_response = 'MMC write: dev # %d, block # %d, count %d ... %d blocks written: OK' % (
+ devid, sector, count_sectors, count_sectors)
+ assert good_response in response
+
+ # Read data
+ cmd = 'mmc read %s %x %x' % (dst_addr, sector, count_sectors)
+ response = u_boot_console.run_command(cmd)
+ good_response = 'MMC read: dev # %d, block # %d, count %d ... %d blocks read: OK' % (
+ devid, sector, count_sectors, count_sectors)
+ assert good_response in response
+
+ # Compare src and dst data
+ cmd = 'cmp.b %s %s %x' % (src_addr, dst_addr, count_bytes)
+ response = u_boot_console.run_command(cmd)
+ good_response = 'Total of %d byte(s) were the same' % (count_bytes)
+ assert good_response in response
--
2.17.1
More information about the U-Boot
mailing list