[U-Boot] [PATCH] armv8: ls1028a: Add environment variables to facilitate the boot

[Yuantian Tang]

Add some environment variables to facilitate the auto boot.

Signed-off-by: Yuantian Tang <andy.tang at nxp.com>
---
 include/configs/ls1028a_common.h | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/include/configs/ls1028a_common.h b/include/configs/ls1028a_common.h
index aeb2c7251a..4f64c9fdb7 100644
--- a/include/configs/ls1028a_common.h
+++ b/include/configs/ls1028a_common.h
@@ -67,6 +67,7 @@
 
 #define BOOT_TARGET_DEVICES(func) \
 	func(MMC, mmc, 0) \
+	func(MMC, mmc, 1) \
 	func(USB, usb, 0)
 #include <config_distro_bootcmd.h>
 
@@ -127,12 +128,14 @@
 			"${scripthdraddr} ${prefix}${boot_script_hdr} " \
 			"&& esbc_validate ${scripthdraddr};"    \
 		"source ${scriptaddr}\0"	  \
-		"xspi_bootcmd=echo Trying load from FlexSPI flash ...;" \
+	"qspi_bootcmd=echo Trying load from FlexSPI flash ...;" \
 		"sf probe 0:0 && sf read $load_addr " \
 		"$kernel_start $kernel_size ; env exists secureboot &&" \
 		"sf read $kernelheader_addr_r $kernelheader_start " \
 		"$kernelheader_size && esbc_validate ${kernelheader_addr_r}; "\
 		" bootm $load_addr#$board\0" \
+	"qspi_hdploadcmd=echo Trying load HDP firmware from flexspi..;" \
+		"hdp load 0x20900000 0x2000\0"		\
 	"sd_bootcmd=echo Trying load from SD ...;" \
 		"mmcinfo; mmc read $load_addr "		\
 		"$kernel_addr_sd $kernel_size_sd && "	\
@@ -165,6 +168,9 @@
 #define SD_BOOTCOMMAND	\
 	"run sd_hdploadcmd; run distro_bootcmd;run sd_bootcmd; " \
 	"env exists secureboot && esbc_halt;"
+#define SD2_BOOTCOMMAND	\
+	"run emmc_hdploadcmd; run distro_bootcmd;run emmc_bootcmd; " \
+	"env exists secureboot && esbc_halt;"
 
 /* Monitor Command Prompt */
 #define CONFIG_SYS_CBSIZE		512	/* Console I/O Buffer Size */
-- 
2.17.1