[U-Boot] [PATCH v5 06/10] ARM: at91: sama5: add common environment for QSPI

[Tudor.Ambarus at microchip.com]

From: Cyrille Pitchen <cyrille.pitchen at microchip.com>

Use the same memory layout as we use for the NAND boot on the other boards.

QSPI flashes are present on the following boards:
sama5d2_xplained RevB:  32 Mbyte flash (mx25l3273fm2i-08g)
sama5d2_xplained RevC:   8 Mbyte flash (sst26vf064b-104i/sn)
sama5d27_som1_ek:        8 Mbyte flash (sst26vf064b-104i/sn)
sama5d2_ptc_ek:          8 Mbyte flash (sst26vf064b-104i/sn)

The 8 Mbyte limit is enough to cope with the memory layout used in the NAND
boot. rootfs exceeds the 8 Mbyte limit and will stay in eMMC in the
sama5d2_xplained case. The final scope is to use a single memory layout for
all boot medias.

Signed-off-by: Cyrille Pitchen <cyrille.pitchen at microchip.com>
[tudor.ambarus at microchip.com: change memory layout, add commit message]
Signed-off-by: Tudor Ambarus <tudor.ambarus at microchip.com>
---
v5: no change
v4: no change
v3: no change
v2: new patch

 include/configs/at91-sama5_common.h | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/include/configs/at91-sama5_common.h b/include/configs/at91-sama5_common.h
index 30c6cd47cac2..fc46540a10ab 100644
--- a/include/configs/at91-sama5_common.h
+++ b/include/configs/at91-sama5_common.h
@@ -72,6 +72,14 @@
 					"sf read 0x21000000 0x60000 0xc000; "	\
 					"sf read 0x22000000 0x6c000 0x394000; "	\
 					"bootz 0x22000000 - 0x21000000"
+#elif CONFIG_QSPI_BOOT
+#define CONFIG_ENV_OFFSET		0x140000
+#define CONFIG_ENV_SIZE			0x20000
+#define CONFIG_ENV_SECT_SIZE		0x1000
+#define CONFIG_BOOTCOMMAND		"sf probe 0; "					\
+					"sf read 0x21000000 0x180000 0x80000; "		\
+					"sf read 0x22000000 0x200000 0x600000; "	\
+					"bootz 0x22000000 - 0x21000000"
 #endif
 
 #endif
-- 
2.9.5