[U-Boot] [PATCH 1/6] km: modify Kconfig file organization for KM boards

[Linder Pascal]

Hi Stefan,


Yes, it is just an updated version that matches the current mainline. Sorry, I am new to open source contribution, and will take more care next time.


Cheers,


Pascal Linder

________________________________
Von: Stefan Roese <sr at denx.de>
Gesendet: Dienstag, 18. Juni 2019 13:36
An: Linder Pascal; u-boot at lists.denx.de
Cc: Holger Brunck
Betreff: Re: [U-Boot] [PATCH 1/6] km: modify Kconfig file organization for KM boards

Hi Pascal,

On 18.06.19 13:27, Pascal Linder wrote:
> As preparation for the upcoming transferring of configurations from header
> files to Kconfig, a common Kconfig file for all KM boards was created. For
> the moment, it only sources the other three, more specific, Kconfig files.
> Therefore, the architecture Kconfig files now include the common Kconfig
> file. Also, the configuration selection for KM boards was moved from the
> architecture Kconfig files to the board specific Kconfig files.
>
> Signed-off-by: Pascal Linder <pascal.linder at edu.hefr.ch>
> Signed-off-by: Holger Brunck <holger.brunck at ch.abb.com>
> Cc: Mario Six <mario.six at gdsys.cc>
> Cc: Prabhakar Kushwaha <prabhakar.kushwaha at nxp.com>
> ---
>   arch/arm/mach-kirkwood/Kconfig   |  9 ++---
>   arch/powerpc/cpu/mpc83xx/Kconfig | 44 ++++++-----------------
>   arch/powerpc/cpu/mpc85xx/Kconfig |  8 ++---
>   board/keymile/Kconfig            | 16 +++++++++
>   board/keymile/km83xx/Kconfig     | 62 ++++++++++++++++++++++++++++++++
>   board/keymile/km_arm/Kconfig     |  7 ++++
>   board/keymile/kmp204x/Kconfig    |  8 +++++
>   7 files changed, 109 insertions(+), 45 deletions(-)
>   create mode 100644 board/keymile/Kconfig

Are you only posting this patch in an updated version? That's fine,
I just wanted to know.

But: You need to provide a patch history. Please see here for more
details:

http://www.denx.de/wiki/view/U-Boot/Patches#Sending_updated_patch_versions

No need to re-do this for this patch. But please next time. ;)

Thanks,
Stefan