[U-Boot] [PATCH 2/7] sunxi: H6: DRAM: follow recommended PHY init algorithm

Andre Przywara andre.przywara at arm.com
Wed Jun 19 01:11:04 UTC 2019


The DRAM controller manual suggests to first program the PHY
initialisation parameters to the PHY_PIR register, and then set bit 0 to
trigger the initialisation. This is also used in boot0.

Follow this recommendation by setting bit 0 in a separate step.

Signed-off-by: Andre Przywara <andre.przywara at arm.com>
---
 arch/arm/mach-sunxi/dram_sun50i_h6.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/arch/arm/mach-sunxi/dram_sun50i_h6.c b/arch/arm/mach-sunxi/dram_sun50i_h6.c
index e2f141eb9b..7a8b724f08 100644
--- a/arch/arm/mach-sunxi/dram_sun50i_h6.c
+++ b/arch/arm/mach-sunxi/dram_sun50i_h6.c
@@ -75,12 +75,14 @@ static void mctl_core_init(struct dram_para *para)
 	mctl_channel_init(para);
 }
 
+/* PHY initialisation */
 static void mctl_phy_pir_init(u32 val)
 {
 	struct sunxi_mctl_phy_reg * const mctl_phy =
 			(struct sunxi_mctl_phy_reg *)SUNXI_DRAM_PHY0_BASE;
 
-	writel(val | BIT(0), &mctl_phy->pir);
+	writel(val, &mctl_phy->pir);
+	writel(val | BIT(0), &mctl_phy->pir);	/* Start initialisation. */
 	mctl_await_completion(&mctl_phy->pgsr[0], BIT(0), BIT(0));
 }
 
-- 
2.14.5



More information about the U-Boot mailing list