[U-Boot] [PATCH v3 0/5] Update SiFive Unleashed Drivers

[Bin Meng]

Hi Anup,

On Wed, Jun 19, 2019 at 3:01 PM Anup Patel <Anup.Patel at wdc.com> wrote:
>
> This series update SiFive Unleashed clock driver so that:
> 1. It is in sync with upstream Linux driver
> 2. It uses latest DT bindings as-per upstream Linux driver
>
> With this series, we can now use latest DT bindings with U-Boot. I have
> tested SiFive Serial driver and Cadence MACB ethernet driver with this
> changes and both work fine.
>
> The legacy FSBL will still pass DTB to U-Boot with older DT bindings
> which will break the updated SiFive Unleashed clock driver. To tackle
> this, we have embedded DTB in OpenSBI FW_PAYLOAD firmware for SiFive
> Unleashed so that OpenSBI will override and pass updated DTB to U-Boot.
>
> In fact, the updated DTB passed by OpenSBI can be used by latest Linux
> (i.e. V5.2-rc1 or higher) as well.
>
> The OpenSBI changes to embed SiFive Unleashed DTB can be found in
> sifive_unleashed_dtb_fix_v3 branch of:
> https://github.com/avpatel/opensbi.git
>
> This series can be found in riscv_unleashed_clk_sync_v3 branch of:
> https://github.com/avpatel/u-boot.git
>
> Changes since v2:
> - Dropped PATCH6 which adds new compatible string to MACB driver because
>   more changes are required in MACB driver for different ethernet speeds
>

If we drop PATCH6, we should also drop PATCH5, otherwise U-Boot
10/100Mbps is broken.

Regards,
Bin