[U-Boot] [PATCH] fsl-layerscape/ls1046a_serdes.c: add 0x3040 serdes1 setting

[Prabhakar Kushwaha]

> -----Original Message-----
> From: Maciej Pijanowski <maciej.pijanowski at 3mdeb.com>
> Sent: Friday, May 31, 2019 7:42 PM
> To: u-boot at lists.denx.de
> Cc: piotr.krol at 3mdeb.com; Maciej Pijanowski
> <maciej.pijanowski at 3mdeb.com>; Prabhakar Kushwaha
> <prabhakar.kushwaha at nxp.com>
> Subject: [PATCH] fsl-layerscape/ls1046a_serdes.c: add 0x3040 serdes1 setting
> 
> According to the table 31-1 in the QorIQ LS1046A Reference Manual, Rev. 2,
> 11/2018, the 0x3040 is also a valid setting for the SerDes1.
> With the current codebase, following message appears when 0x3040 is
> used:
> 
> SERDES1[PRTCL] = 0x3040 is not valid
> 
> Signed-off-by: Maciej Pijanowski <maciej.pijanowski at 3mdeb.com>
> 
> Cc: prabhakar.kushwaha at nxp.com
> Cc: piotr.krol at 3mdeb.com
> ---

Updated description
This patch has been applied to fsl-qoriq master, awaiting upstream.

--pk