[U-Boot] [PATCH] configs/ls1046ardb_*: disable CONFIG_SPI_FLASH_USE_4K_SECTORS

[Prabhakar Kushwaha]

> -----Original Message-----
> From: Maciej Pijanowski <maciej.pijanowski at 3mdeb.com>
> Sent: Saturday, June 1, 2019 2:01 AM
> To: u-boot at lists.denx.de
> Cc: piotr.krol at 3mdeb.com; Maciej Pijanowski
> <maciej.pijanowski at 3mdeb.com>; Prabhakar Kushwaha
> <prabhakar.kushwaha at nxp.com>
> Subject: [PATCH] configs/ls1046ardb_*: disable
> CONFIG_SPI_FLASH_USE_4K_SECTORS
> 
> With this setting enabled, the on-board QSPI cannot be properly flashed. There
> are no error messages, but the simple write / read / compare tests fail.
> 
> This is already disabled in the qspi and tfa defconfigs for the LS1046ARDB
> platform.
> 
> Signed-off-by: Maciej Pijanowski <maciej.pijanowski at 3mdeb.com>
> 
> Cc: prabhakar.kushwaha at nxp.com
> Cc: piotr.krol at 3mdeb.com
> ---

This patch has been applied to fsl-qoriq master, awaiting upstream.

--pk