[U-Boot] [PATCH v5 5/6] pinctrl: mxs: Add support for i.MX2[38] mxs pinctrl driver

Lukasz Majewski lukma at denx.de
Wed Jun 19 12:27:33 UTC 2019


The code responsible for setting proper values in the MUX registers
(in the mxs_pinctrl_set_state()) has been ported from Linux kernel
- SHA1: 17bb763e7eaf tag v5.1.11 from linux-stable.

As the pinctrl node in the imx28.dtsi file has gpio pins nodes as subnodes,
it was necessary to use 'dm_scan_fdt_dev()' (as a .bind method) to also
make them 'visible' by the DM's "gpio_mxs" driver.

Signed-off-by: Lukasz Majewski <lukma at denx.de>

---

Changes in v5:
- Set more appropriate tags ("pinctrl: mxs:")
- Use the clrsetbits_le32() in mxs_pinctrl_rmwl() function - now moved to
  pinctrl-mxs.h file

Changes in v4:
- Use Linux kernel code to setup pins instead of Barebox
- Add soc specific data and compatible for i.MX23 and i.MX28
- Use devm_kfree() to release temporary memory

Changes in v3:
- Set more appropriate tags

Changes in v2: None

 drivers/pinctrl/nxp/Kconfig       |  10 ++
 drivers/pinctrl/nxp/Makefile      |   1 +
 drivers/pinctrl/nxp/pinctrl-mxs.c | 190 ++++++++++++++++++++++++++++++++++++++
 drivers/pinctrl/nxp/pinctrl-mxs.h |  61 ++++++++++++
 4 files changed, 262 insertions(+)
 create mode 100644 drivers/pinctrl/nxp/pinctrl-mxs.c
 create mode 100644 drivers/pinctrl/nxp/pinctrl-mxs.h

diff --git a/drivers/pinctrl/nxp/Kconfig b/drivers/pinctrl/nxp/Kconfig
index 61f93be42d..f2e67ca231 100644
--- a/drivers/pinctrl/nxp/Kconfig
+++ b/drivers/pinctrl/nxp/Kconfig
@@ -89,6 +89,16 @@ config PINCTRL_IMX8M
 	  only parses the 'fsl,pins' property and configure related
 	  registers.
 
+config PINCTRL_MXS
+	bool "NXP MXS pinctrl driver"
+	depends on ARCH_MX28 && PINCTRL_FULL
+	help
+	  Say Y here to enable the i.MX mxs pinctrl driver
+
+	  This option provides a simple pinctrl driver for i.MX mxs SoC
+	  familiy, e.g. i.MX28. This feature depends on device tree
+	  configuration.
+
 config PINCTRL_VYBRID
 	bool "Vybrid (vf610) pinctrl driver"
 	depends on ARCH_VF610 && PINCTRL_FULL
diff --git a/drivers/pinctrl/nxp/Makefile b/drivers/pinctrl/nxp/Makefile
index b340d9448a..b86448aac9 100644
--- a/drivers/pinctrl/nxp/Makefile
+++ b/drivers/pinctrl/nxp/Makefile
@@ -6,4 +6,5 @@ obj-$(CONFIG_PINCTRL_IMX7ULP)		+= pinctrl-imx7ulp.o
 obj-$(CONFIG_PINCTRL_IMX_SCU)		+= pinctrl-scu.o
 obj-$(CONFIG_PINCTRL_IMX8)		+= pinctrl-imx8.o
 obj-$(CONFIG_PINCTRL_IMX8M)		+= pinctrl-imx8m.o
+obj-$(CONFIG_PINCTRL_MXS)		+= pinctrl-mxs.o
 obj-$(CONFIG_PINCTRL_VYBRID)		+= pinctrl-vf610.o
diff --git a/drivers/pinctrl/nxp/pinctrl-mxs.c b/drivers/pinctrl/nxp/pinctrl-mxs.c
new file mode 100644
index 0000000000..6f6ca84674
--- /dev/null
+++ b/drivers/pinctrl/nxp/pinctrl-mxs.c
@@ -0,0 +1,190 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2019 DENX Software Engineering
+ * Lukasz Majewski, DENX Software Engineering, lukma at denx.de
+ */
+
+#include <common.h>
+#include <linux/io.h>
+#include <linux/err.h>
+#include <dm.h>
+#include <dm/pinctrl.h>
+#include <dm/read.h>
+#include "pinctrl-mxs.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+struct mxs_pinctrl_priv {
+	void __iomem *base;
+	const struct mxs_regs *regs;
+};
+
+static unsigned long mxs_dt_node_to_map(struct udevice *conf)
+{
+	unsigned long config = 0;
+	int ret;
+	u32 val;
+
+	ret = dev_read_u32(conf, "fsl,drive-strength", &val);
+	if (!ret)
+		config = val | MA_PRESENT;
+
+	ret = dev_read_u32(conf, "fsl,voltage", &val);
+	if (!ret)
+		config |= val << VOL_SHIFT | VOL_PRESENT;
+
+	ret = dev_read_u32(conf, "fsl,pull-up", &val);
+	if (!ret)
+		config |= val << PULL_SHIFT | PULL_PRESENT;
+
+	return config;
+}
+
+static int mxs_pinctrl_set_mux(struct udevice *dev, u32 val, int bank, int pin)
+{
+	struct mxs_pinctrl_priv *iomux = dev_get_priv(dev);
+	int muxsel = MUXID_TO_MUXSEL(val), shift;
+	void __iomem *reg;
+
+	reg = iomux->base + iomux->regs->muxsel;
+	reg += bank * 0x20 + pin / 16 * 0x10;
+	shift = pin % 16 * 2;
+
+	mxs_pinctrl_rmwl(muxsel, 0x3, shift, reg);
+	debug(" mux %d,", muxsel);
+
+	return 0;
+}
+
+static int mxs_pinctrl_set_state(struct udevice *dev, struct udevice *conf)
+{
+	struct mxs_pinctrl_priv *iomux = dev_get_priv(dev);
+	u32 *pin_data, val, ma, vol, pull;
+	int npins, size, i, ret;
+	unsigned long config;
+
+	debug("\n%s: set state: %s\n", __func__, conf->name);
+
+	size = dev_read_size(conf, "fsl,pinmux-ids");
+	if (size < 0)
+		return size;
+
+	if (!size || size % sizeof(int)) {
+		dev_err(dev, "Invalid fsl,pinmux-ids property in %s\n",
+			conf->name);
+		return -EINVAL;
+	}
+
+	npins = size / sizeof(int);
+
+	pin_data = devm_kzalloc(dev, size, 0);
+	if (!pin_data)
+		return -ENOMEM;
+
+	ret = dev_read_u32_array(conf, "fsl,pinmux-ids", pin_data, npins);
+	if (ret) {
+		dev_err(dev, "Error reading pin data.\n");
+		devm_kfree(dev, pin_data);
+		return -EINVAL;
+	}
+
+	config = mxs_dt_node_to_map(conf);
+
+	ma = CONFIG_TO_MA(config);
+	vol = CONFIG_TO_VOL(config);
+	pull = CONFIG_TO_PULL(config);
+
+	for (i = 0; i < npins; i++) {
+		int pinid, bank, pin, shift;
+		void __iomem *reg;
+
+		val = pin_data[i];
+
+		pinid = MUXID_TO_PINID(val);
+		bank = PINID_TO_BANK(pinid);
+		pin = PINID_TO_PIN(pinid);
+
+		debug("(val: 0x%x) pin %d,", val, pinid);
+		/* Setup pinmux */
+		mxs_pinctrl_set_mux(dev, val, bank, pin);
+
+		debug(" ma: %d, vol: %d, pull: %d\n", ma, vol, pull);
+
+		/* drive */
+		reg = iomux->base + iomux->regs->drive;
+		reg += bank * 0x40 + pin / 8 * 0x10;
+
+		/* mA */
+		if (config & MA_PRESENT) {
+			shift = pin % 8 * 4;
+			mxs_pinctrl_rmwl(ma, 0x3, shift, reg);
+		}
+
+		/* vol */
+		if (config & VOL_PRESENT) {
+			shift = pin % 8 * 4 + 2;
+			if (vol)
+				writel(1 << shift, reg + SET);
+			else
+				writel(1 << shift, reg + CLR);
+		}
+
+		/* pull */
+		if (config & PULL_PRESENT) {
+			reg = iomux->base + iomux->regs->pull;
+			reg += bank * 0x10;
+			shift = pin;
+			if (pull)
+				writel(1 << shift, reg + SET);
+			else
+				writel(1 << shift, reg + CLR);
+		}
+	}
+
+	devm_kfree(dev, pin_data);
+	return 0;
+}
+
+static struct pinctrl_ops mxs_pinctrl_ops = {
+	.set_state = mxs_pinctrl_set_state,
+};
+
+static int mxs_pinctrl_probe(struct udevice *dev)
+{
+	struct mxs_pinctrl_priv *iomux = dev_get_priv(dev);
+
+	iomux->base = dev_read_addr_ptr(dev);
+	iomux->regs = (struct mxs_regs *)dev_get_driver_data(dev);
+
+	return 0;
+}
+
+static const struct mxs_regs imx23_regs = {
+	.muxsel = 0x100,
+	.drive = 0x200,
+	.pull = 0x400,
+};
+
+static const struct mxs_regs imx28_regs = {
+	.muxsel = 0x100,
+	.drive = 0x300,
+	.pull = 0x600,
+};
+
+static const struct udevice_id mxs_pinctrl_match[] = {
+	{ .compatible = "fsl,imx23-pinctrl", .data = (ulong)&imx23_regs },
+	{ .compatible = "fsl,imx28-pinctrl", .data = (ulong)&imx28_regs },
+	{ /* sentinel */ }
+};
+
+U_BOOT_DRIVER(mxs_pinctrl) = {
+	.name = "mxs-pinctrl",
+	.id = UCLASS_PINCTRL,
+	.of_match = of_match_ptr(mxs_pinctrl_match),
+	.probe = mxs_pinctrl_probe,
+#if !CONFIG_IS_ENABLED(OF_PLATDATA)
+	.bind		= dm_scan_fdt_dev,
+#endif
+	.priv_auto_alloc_size = sizeof(struct mxs_pinctrl_priv),
+	.ops = &mxs_pinctrl_ops,
+};
diff --git a/drivers/pinctrl/nxp/pinctrl-mxs.h b/drivers/pinctrl/nxp/pinctrl-mxs.h
new file mode 100644
index 0000000000..a398e43cbe
--- /dev/null
+++ b/drivers/pinctrl/nxp/pinctrl-mxs.h
@@ -0,0 +1,61 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ */
+
+#ifndef __PINCTRL_MXS_H
+#define __PINCTRL_MXS_H
+
+#include <dm/pinctrl.h>
+
+#define SET	0x4
+#define CLR	0x8
+#define TOG	0xc
+
+#define MXS_PINCTRL_PIN(pin)	PINCTRL_PIN(pin, #pin)
+#define PINID(bank, pin)	((bank) * 32 + (pin))
+
+/*
+ * pinmux-id bit field definitions
+ *
+ * bank:	15..12	(4)
+ * pin:		11..4	(8)
+ * muxsel:	3..0	(4)
+ */
+#define MUXID_TO_PINID(m)	PINID((m) >> 12 & 0xf, (m) >> 4 & 0xff)
+#define MUXID_TO_MUXSEL(m)	((m) & 0xf)
+
+#define PINID_TO_BANK(p)	((p) >> 5)
+#define PINID_TO_PIN(p)		((p) % 32)
+
+/*
+ * pin config bit field definitions
+ *
+ * pull-up:	6..5	(2)
+ * voltage:	4..3	(2)
+ * mA:		2..0	(3)
+ *
+ * MSB of each field is presence bit for the config.
+ */
+#define PULL_PRESENT		(1 << 6)
+#define PULL_SHIFT		5
+#define VOL_PRESENT		(1 << 4)
+#define VOL_SHIFT		3
+#define MA_PRESENT		(1 << 2)
+#define MA_SHIFT		0
+#define CONFIG_TO_PULL(c)	((c) >> PULL_SHIFT & 0x1)
+#define CONFIG_TO_VOL(c)	((c) >> VOL_SHIFT & 0x1)
+#define CONFIG_TO_MA(c)		((c) >> MA_SHIFT & 0x3)
+
+struct mxs_regs {
+	u16 muxsel;
+	u16 drive;
+	u16 pull;
+};
+
+static inline void mxs_pinctrl_rmwl(u32 value, u32 mask, u8 shift,
+				    void __iomem *reg)
+{
+	clrsetbits_le32(reg, mask << shift, value << shift);
+}
+#endif /* __PINCTRL_MXS_H */
-- 
2.11.0



More information about the U-Boot mailing list