[U-Boot] [PATCH v2 2/8] rockchip: rk3399: Support common spl_board_init
Jagan Teki
jagan at amarulasolutions.com
Thu Jun 20 18:55:00 UTC 2019
Support common spl_board_init by moving code from puma
board file into, common rk3399-board-spl.c.
Part of the code has sysreset-gpio, regulators_enable_boot_on
but right now only puma board is using this with relevant
config options rest remains common for all targets.
Signed-off-by: Jagan Teki <jagan at amarulasolutions.com>
---
arch/arm/mach-rockchip/rk3399-board-spl.c | 63 +++++++++++++++++++
board/rockchip/evb_rk3399/evb-rk3399.c | 8 ---
.../puma_rk3399/puma-rk3399.c | 58 -----------------
board/vamrs/rock960_rk3399/rock960-rk3399.c | 8 ---
4 files changed, 63 insertions(+), 74 deletions(-)
diff --git a/arch/arm/mach-rockchip/rk3399-board-spl.c b/arch/arm/mach-rockchip/rk3399-board-spl.c
index 800ca80022..65c98b697d 100644
--- a/arch/arm/mach-rockchip/rk3399-board-spl.c
+++ b/arch/arm/mach-rockchip/rk3399-board-spl.c
@@ -11,13 +11,16 @@
#include <spl.h>
#include <spl_gpio.h>
#include <syscon.h>
+#include <asm/gpio.h>
#include <asm/io.h>
#include <asm/arch-rockchip/bootrom.h>
#include <asm/arch-rockchip/clock.h>
+#include <asm/arch-rockchip/cru_rk3399.h>
#include <asm/arch-rockchip/grf_rk3399.h>
#include <asm/arch-rockchip/hardware.h>
#include <asm/arch-rockchip/periph.h>
#include <asm/arch-rockchip/sys_proto.h>
+#include <power/regulator.h>
#include <dm/pinctrl.h>
void board_return_to_bootrom(void)
@@ -202,6 +205,66 @@ void board_init_f(ulong dummy)
}
}
+#if defined(SPL_GPIO_SUPPORT)
+static void rk3399_force_power_on_reset(void)
+{
+ ofnode node;
+ struct gpio_desc sysreset_gpio;
+
+ debug("%s: trying to force a power-on reset\n", __func__);
+
+ node = ofnode_path("/config");
+ if (!ofnode_valid(node)) {
+ debug("%s: no /config node?\n", __func__);
+ return;
+ }
+
+ if (gpio_request_by_name_nodev(node, "sysreset-gpio", 0,
+ &sysreset_gpio, GPIOD_IS_OUT)) {
+ debug("%s: could not find a /config/sysreset-gpio\n", __func__);
+ return;
+ }
+
+ dm_gpio_set_value(&sysreset_gpio, 1);
+}
+#endif
+
+void spl_board_init(void)
+{
+#if defined(SPL_GPIO_SUPPORT)
+ struct rk3399_cru *cru = rockchip_get_cru();
+
+ /*
+ * The RK3399 resets only 'almost all logic' (see also in the TRM
+ * "3.9.4 Global software reset"), when issuing a software reset.
+ * This may cause issues during boot-up for some configurations of
+ * the application software stack.
+ *
+ * To work around this, we test whether the last reset reason was
+ * a power-on reset and (if not) issue an overtemp-reset to reset
+ * the entire module.
+ *
+ * While this was previously fixed by modifying the various places
+ * that could generate a software reset (e.g. U-Boot's sysreset
+ * driver, the ATF or Linux), we now have it here to ensure that
+ * we no longer have to track this through the various components.
+ */
+ if (cru->glb_rst_st != 0)
+ rk3399_force_power_on_reset();
+#endif
+
+#if defined(SPL_DM_REGULATOR)
+ /*
+ * Turning the eMMC and SPI back on (if disabled via the Qseven
+ * BIOS_ENABLE) signal is done through a always-on regulator).
+ */
+ if (regulators_enable_boot_on(false))
+ debug("%s: Cannot enable boot on regulator\n", __func__);
+#endif
+
+ preloader_console_init();
+}
+
#ifdef CONFIG_SPL_LOAD_FIT
int board_fit_config_name_match(const char *name)
{
diff --git a/board/rockchip/evb_rk3399/evb-rk3399.c b/board/rockchip/evb_rk3399/evb-rk3399.c
index 769b5d146f..c600553ff6 100644
--- a/board/rockchip/evb_rk3399/evb-rk3399.c
+++ b/board/rockchip/evb_rk3399/evb-rk3399.c
@@ -8,7 +8,6 @@
#include <dm/pinctrl.h>
#include <asm/arch-rockchip/periph.h>
#include <power/regulator.h>
-#include <spl.h>
int board_init(void)
{
@@ -64,10 +63,3 @@ int board_init(void)
out:
return 0;
}
-
-void spl_board_init(void)
-{
- preloader_console_init();
-
- return;
-}
diff --git a/board/theobroma-systems/puma_rk3399/puma-rk3399.c b/board/theobroma-systems/puma_rk3399/puma-rk3399.c
index c6b509c109..251cd2d566 100644
--- a/board/theobroma-systems/puma_rk3399/puma-rk3399.c
+++ b/board/theobroma-systems/puma_rk3399/puma-rk3399.c
@@ -13,10 +13,8 @@
#include <dm/pinctrl.h>
#include <dm/uclass-internal.h>
#include <asm/io.h>
-#include <asm/gpio.h>
#include <asm/setup.h>
#include <asm/arch-rockchip/clock.h>
-#include <asm/arch-rockchip/cru_rk3399.h>
#include <asm/arch-rockchip/hardware.h>
#include <asm/arch-rockchip/grf_rk3399.h>
#include <asm/arch-rockchip/periph.h>
@@ -38,62 +36,6 @@ int board_init(void)
return 0;
}
-static void rk3399_force_power_on_reset(void)
-{
- ofnode node;
- struct gpio_desc sysreset_gpio;
-
- debug("%s: trying to force a power-on reset\n", __func__);
-
- node = ofnode_path("/config");
- if (!ofnode_valid(node)) {
- debug("%s: no /config node?\n", __func__);
- return;
- }
-
- if (gpio_request_by_name_nodev(node, "sysreset-gpio", 0,
- &sysreset_gpio, GPIOD_IS_OUT)) {
- debug("%s: could not find a /config/sysreset-gpio\n", __func__);
- return;
- }
-
- dm_gpio_set_value(&sysreset_gpio, 1);
-}
-
-void spl_board_init(void)
-{
- int ret;
- struct rk3399_cru *cru = rockchip_get_cru();
-
- /*
- * The RK3399 resets only 'almost all logic' (see also in the TRM
- * "3.9.4 Global software reset"), when issuing a software reset.
- * This may cause issues during boot-up for some configurations of
- * the application software stack.
- *
- * To work around this, we test whether the last reset reason was
- * a power-on reset and (if not) issue an overtemp-reset to reset
- * the entire module.
- *
- * While this was previously fixed by modifying the various places
- * that could generate a software reset (e.g. U-Boot's sysreset
- * driver, the ATF or Linux), we now have it here to ensure that
- * we no longer have to track this through the various components.
- */
- if (cru->glb_rst_st != 0)
- rk3399_force_power_on_reset();
-
- /*
- * Turning the eMMC and SPI back on (if disabled via the Qseven
- * BIOS_ENABLE) signal is done through a always-on regulator).
- */
- ret = regulators_enable_boot_on(false);
- if (ret)
- debug("%s: Cannot enable boot on regulator\n", __func__);
-
- preloader_console_init();
-}
-
static void setup_macaddr(void)
{
#if CONFIG_IS_ENABLED(CMD_NET)
diff --git a/board/vamrs/rock960_rk3399/rock960-rk3399.c b/board/vamrs/rock960_rk3399/rock960-rk3399.c
index 018e4b55b8..2eb7120e84 100644
--- a/board/vamrs/rock960_rk3399/rock960-rk3399.c
+++ b/board/vamrs/rock960_rk3399/rock960-rk3399.c
@@ -6,7 +6,6 @@
#include <common.h>
#include <dm.h>
#include <power/regulator.h>
-#include <spl.h>
int board_init(void)
{
@@ -18,10 +17,3 @@ int board_init(void)
return 0;
}
-
-void spl_board_init(void)
-{
- preloader_console_init();
-
- return;
-}
--
2.18.0.321.gffc6fa0e3
More information about the U-Boot
mailing list