[U-Boot] [PATCH 1/2] mx6: mx6sabre common: Use more conventional spelling of fdtfile
Sjoerd Simons
sjoerd.simons at collabora.co.uk
Thu Jun 20 20:34:35 UTC 2019
Both the distro boot configuration as well as the general pxe support
standardized on fdtfile as the variable to hold the dtb filename.
Adjust to follow that such that e.g. "pxe boot" will just work.
Signed-off-by: Sjoerd Simons <sjoerd.simons at collabora.co.uk>
---
include/configs/mx6sabre_common.h | 22 +++++++++++-----------
1 file changed, 11 insertions(+), 11 deletions(-)
diff --git a/include/configs/mx6sabre_common.h b/include/configs/mx6sabre_common.h
index c137612b01..270cd2bae2 100644
--- a/include/configs/mx6sabre_common.h
+++ b/include/configs/mx6sabre_common.h
@@ -51,7 +51,7 @@
#define CONFIG_EXTRA_ENV_SETTINGS \
"script=boot.scr\0" \
"image=zImage\0" \
- "fdt_file=undefined\0" \
+ "fdtfile=undefined\0" \
"fdt_addr=0x18000000\0" \
"boot_fdt=try\0" \
"ip_dyn=yes\0" \
@@ -86,7 +86,7 @@
"bootscript=echo Running bootscript from mmc ...; " \
"source\0" \
"loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
- "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
+ "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdtfile}\0" \
"mmcboot=echo Booting from mmc ...; " \
"run finduuid; " \
"run mmcargs; " \
@@ -115,7 +115,7 @@
"fi; " \
"${get_cmd} ${image}; " \
"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
- "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
+ "if ${get_cmd} ${fdt_addr} ${fdtfile}; then " \
"bootz ${loadaddr} - ${fdt_addr}; " \
"else " \
"if test ${boot_fdt} = try; then " \
@@ -128,20 +128,20 @@
"bootz; " \
"fi;\0" \
"findfdt="\
- "if test $fdt_file = undefined; then " \
+ "if test $fdtfile = undefined; then " \
"if test $board_name = SABREAUTO && test $board_rev = MX6QP; then " \
- "setenv fdt_file imx6qp-sabreauto.dtb; fi; " \
+ "setenv fdtfile imx6qp-sabreauto.dtb; fi; " \
"if test $board_name = SABREAUTO && test $board_rev = MX6Q; then " \
- "setenv fdt_file imx6q-sabreauto.dtb; fi; " \
+ "setenv fdtfile imx6q-sabreauto.dtb; fi; " \
"if test $board_name = SABREAUTO && test $board_rev = MX6DL; then " \
- "setenv fdt_file imx6dl-sabreauto.dtb; fi; " \
+ "setenv fdtfile imx6dl-sabreauto.dtb; fi; " \
"if test $board_name = SABRESD && test $board_rev = MX6QP; then " \
- "setenv fdt_file imx6qp-sabresd.dtb; fi; " \
+ "setenv fdtfile imx6qp-sabresd.dtb; fi; " \
"if test $board_name = SABRESD && test $board_rev = MX6Q; then " \
- "setenv fdt_file imx6q-sabresd.dtb; fi; " \
+ "setenv fdtfile imx6q-sabresd.dtb; fi; " \
"if test $board_name = SABRESD && test $board_rev = MX6DL; then " \
- "setenv fdt_file imx6dl-sabresd.dtb; fi; " \
- "if test $fdt_file = undefined; then " \
+ "setenv fdtfile imx6dl-sabresd.dtb; fi; " \
+ "if test $fdtfile = undefined; then " \
"echo WARNING: Could not determine dtb to use; fi; " \
"fi;\0" \
--
2.20.1
More information about the U-Boot
mailing list