[U-Boot] [PATCH v2 5/8] rockchip: rk3399: Enable SPL_BOARD_INIT
Kever Yang
kever.yang at rock-chips.com
Sat Jun 22 13:49:33 UTC 2019
Hi Jagan,
On 06/21/2019 02:55 AM, Jagan Teki wrote:
> Enable SPL_BOARD_INIT globally to rk3399, this would
> help to print the SPL banner during bootup.
>
> Signed-off-by: Jagan Teki <jagan at amarulasolutions.com>
Reviewed-by: Kever Yang <kever.yang at rock-chips.com>
Thanks,
- Kever
> ---
> arch/arm/mach-rockchip/Kconfig | 1 +
> configs/puma-rk3399_defconfig | 1 -
> 2 files changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/arch/arm/mach-rockchip/Kconfig b/arch/arm/mach-rockchip/Kconfig
> index c05e3c3f48..ce039022df 100644
> --- a/arch/arm/mach-rockchip/Kconfig
> +++ b/arch/arm/mach-rockchip/Kconfig
> @@ -158,6 +158,7 @@ config ROCKCHIP_RK3399
> select SPL
> select SPL_ATF
> select SPL_ATF_NO_PLATFORM_PARAM if SPL_ATF
> + select SPL_BOARD_INIT if SPL
> select SPL_LOAD_FIT
> select SPL_CLK if SPL
> select SPL_PINCTRL if SPL
> diff --git a/configs/puma-rk3399_defconfig b/configs/puma-rk3399_defconfig
> index ebc78fb216..5cb2273a15 100644
> --- a/configs/puma-rk3399_defconfig
> +++ b/configs/puma-rk3399_defconfig
> @@ -21,7 +21,6 @@ CONFIG_MISC_INIT_R=y
> # CONFIG_DISPLAY_CPUINFO is not set
> CONFIG_DISPLAY_BOARDINFO_LATE=y
> CONFIG_SPL_TEXT_BASE=0xff8c2000
> -CONFIG_SPL_BOARD_INIT=y
> # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
> # CONFIG_SPL_LEGACY_IMAGE_SUPPORT is not set
> CONFIG_SPL_STACK_R=y
More information about the U-Boot
mailing list