[U-Boot] [PATCH 7/7] wandboard: README: Adjust the U-Boot proper binary name
Heinrich Schuchardt
xypron.glpk at gmx.de
Sun Jun 23 14:04:53 UTC 2019
On 6/12/19 5:34 PM, Fabio Estevam wrote:
> After the conversion to DM the U-Boot proper binary name
> is 'u-boot-dtb.img', so adjust it accordingly.
>
> Signed-off-by: Fabio Estevam <festevam at gmail.com>
> ---
> board/wandboard/README | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/board/wandboard/README b/board/wandboard/README
> index e5170bcc81..f84f205337 100644
> --- a/board/wandboard/README
> +++ b/board/wandboard/README > @@ -29,7 +29,7 @@ $ sudo dd if=SPL of=/dev/mmcblk0 bs=1k seek=1; sync
>
> - Flash the u-boot.img image into the SD card:
>
> -sudo dd if=u-boot.img of=/dev/mmcblk0 bs=1k seek=69; sync
> +sudo dd if=u-boot-dtb.img of=/dev/mmcblk0 bs=1k seek=69; sync
With U-Boot HEAD I cannot see any difference between the files:
$ md5sum u-boot*.bin
56a64c916b79c012759ad430a52fb2c1 u-boot.bin
56a64c916b79c012759ad430a52fb2c1 u-boot-dtb.bin
ed69f924f0cb4b9415d0bed27f896be3 u-boot-nodtb.bin
So is this just a formal change?
Best regards
Heinrich
>
> - Insert the SD card into the slot located in the bottom of the board (same side
> as the mx6 processor)
>
More information about the U-Boot
mailing list