[U-Boot] [PATCH v2 5/5] sunxi: H6: Enable USB for existing boards

[Andre Przywara]

So far USB was not enabled for the Allwinner H6 boards, as the PHY
driver was not ready and the clock gates were missing. Since this is now
fixed, let's add the PHY and the OHCI/EHCI drivers to the build, for
all existing H6 boards.

Signed-off-by: Andre Przywara <andre.przywara at arm.com>
---
 arch/arm/mach-sunxi/Kconfig         | 1 +
 configs/beelink_gs1_defconfig       | 2 ++
 configs/orangepi_lite2_defconfig    | 2 ++
 configs/orangepi_one_plus_defconfig | 2 ++
 configs/pine_h64_defconfig          | 3 +++
 5 files changed, 10 insertions(+)

diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig
index 1669e62a6d..ad29139545 100644
--- a/arch/arm/mach-sunxi/Kconfig
+++ b/arch/arm/mach-sunxi/Kconfig
@@ -300,6 +300,7 @@ config MACH_SUN50I_H6
 	select ARM64
 	select SUPPORT_SPL
 	select FIT
+	select PHY_SUN4I_USB
 	select SPL_LOAD_FIT
 	select DRAM_SUN50I_H6
 
diff --git a/configs/beelink_gs1_defconfig b/configs/beelink_gs1_defconfig
index f16d0fee22..8458f6b32f 100644
--- a/configs/beelink_gs1_defconfig
+++ b/configs/beelink_gs1_defconfig
@@ -14,3 +14,5 @@ CONFIG_SPL_TEXT_BASE=0x20060
 CONFIG_DEFAULT_DEVICE_TREE="sun50i-h6-beelink-gs1"
 CONFIG_LED=y
 CONFIG_LED_GPIO=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_OHCI_HCD=y
diff --git a/configs/orangepi_lite2_defconfig b/configs/orangepi_lite2_defconfig
index e5c2846eaa..227e1ac873 100644
--- a/configs/orangepi_lite2_defconfig
+++ b/configs/orangepi_lite2_defconfig
@@ -11,3 +11,5 @@ CONFIG_SPL_TEXT_BASE=0x20060
 # CONFIG_SPL_DOS_PARTITION is not set
 # CONFIG_SPL_EFI_PARTITION is not set
 CONFIG_DEFAULT_DEVICE_TREE="sun50i-h6-orangepi-lite2"
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_OHCI_HCD=y
diff --git a/configs/orangepi_one_plus_defconfig b/configs/orangepi_one_plus_defconfig
index 65537c422f..2e45909e3a 100644
--- a/configs/orangepi_one_plus_defconfig
+++ b/configs/orangepi_one_plus_defconfig
@@ -11,3 +11,5 @@ CONFIG_SPL_TEXT_BASE=0x20060
 # CONFIG_SPL_DOS_PARTITION is not set
 # CONFIG_SPL_EFI_PARTITION is not set
 CONFIG_DEFAULT_DEVICE_TREE="sun50i-h6-orangepi-one-plus"
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_OHCI_HCD=y
diff --git a/configs/pine_h64_defconfig b/configs/pine_h64_defconfig
index 5ac89b462c..0c5e47bbf7 100644
--- a/configs/pine_h64_defconfig
+++ b/configs/pine_h64_defconfig
@@ -12,3 +12,6 @@ CONFIG_SPL_TEXT_BASE=0x20060
 # CONFIG_SPL_DOS_PARTITION is not set
 # CONFIG_SPL_EFI_PARTITION is not set
 CONFIG_DEFAULT_DEVICE_TREE="sun50i-h6-pine-h64"
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB3_VBUS_PIN="PL5"
-- 
2.14.5