[U-Boot] [PATCH 2/8] net: tsec: Fix offset of MDIO registers for DM_ETH

Vladimir Oltean olteanv at gmail.com
Sun Jun 23 17:48:12 UTC 2019


By convention, the eTSEC MDIO controller nodes are defined in DT at
0x2d24000 and 0x2d50000, but actually U-boot does not touch the
interrupt portion of the register map (MDIO_IEVENTM, MDIO_IMASKM,
MDIO_EMAPM).

That leaves only the MDIO bus registers (MDIO_MIIMCFG, MDIO_MIIMCOM,
MDIO_MIIMADD, MDIO_MIIMADD, MDIO_MIIMCON, MDIO_MIIMSTAT) which start at
the 0x520 offset.

So shift the DT-defined register map by the offset of MDIO_MIIMCFG when
mapping the MDIO bus registers.

Signed-off-by: Vladimir Oltean <olteanv at gmail.com>
---
 drivers/net/tsec.c | 13 +++++++------
 include/tsec.h     |  4 +++-
 2 files changed, 10 insertions(+), 7 deletions(-)

diff --git a/drivers/net/tsec.c b/drivers/net/tsec.c
index 53eb5470f4c8..576398676af7 100644
--- a/drivers/net/tsec.c
+++ b/drivers/net/tsec.c
@@ -801,6 +801,7 @@ int tsec_probe(struct udevice *dev)
 	u32 tbiaddr = CONFIG_SYS_TBIPA_VALUE;
 	ofnode parent;
 	const char *phy_mode;
+	fdt_addr_t reg;
 	int ret;
 
 	pdata->iobase = (phys_addr_t)dev_read_addr(dev);
@@ -817,15 +818,15 @@ int tsec_probe(struct udevice *dev)
 	}
 
 	parent = ofnode_get_parent(phandle_args.node);
-	if (ofnode_valid(parent)) {
-		int reg = ofnode_get_addr_index(parent, 0);
-
-		priv->phyregs_sgmii = (struct tsec_mii_mng *)reg;
-	} else {
-		debug("No parent node for PHY?\n");
+	if (!ofnode_valid(parent)) {
+		printf("No parent node for PHY?\n");
 		return -ENOENT;
 	}
 
+	reg = ofnode_get_addr_index(parent, 0);
+	priv->phyregs_sgmii = (struct tsec_mii_mng *)
+			(reg + TSEC_MDIO_REGS_OFFSET);
+
 	ret = dev_read_phandle_with_args(dev, "tbi-handle", NULL, 0, 0,
 					 &phandle_args);
 	if (ret == 0)
diff --git a/include/tsec.h b/include/tsec.h
index e90095121bdd..b17fa957df5b 100644
--- a/include/tsec.h
+++ b/include/tsec.h
@@ -17,6 +17,8 @@
 #include <config.h>
 #include <phy.h>
 
+#define TSEC_MDIO_REGS_OFFSET	0x520
+
 #ifndef CONFIG_DM_ETH
 
 #ifdef CONFIG_ARCH_LS1021A
@@ -27,7 +29,7 @@
 #define TSEC_MDIO_OFFSET	0x01000
 #endif
 
-#define CONFIG_SYS_MDIO_BASE_ADDR (MDIO_BASE_ADDR + 0x520)
+#define CONFIG_SYS_MDIO_BASE_ADDR (MDIO_BASE_ADDR + TSEC_MDIO_REGS_OFFSET)
 
 #define TSEC_GET_REGS(num, offset) \
 	(struct tsec __iomem *)\
-- 
2.17.1



More information about the U-Boot mailing list