[U-Boot] [PATCH] usb: ehci-mx6: Fix bus enumeration for DM case

Ludwig Zenz lzenz at dh-electronics.com
Mon Jun 24 10:20:37 UTC 2019


Marek Vasut <marex at denx.de> Thursday 20th June 2019 22:55:
> It is likely that the DM conversion of EHCI iMX6 driver was a derivative
> of EHCI VF, however the conversion is incomplete and is missing the bind
> workaround, which updates dev->seq number. Without this, all controllers
> have dev->seq number 0 . Add this bind workaround into EHCI iMX6 driver
> as well.
> 
> Signed-off-by: Marek Vasut <marex at denx.de>
> Cc: Abel Vesa <abel.vesa at nxp.com>
> Cc: Adam Ford <aford173 at gmail.com>
> Cc: Fabio Estevam <festevam at gmail.com>
> Cc: Ludwig Zenz <lzenz at dh-electronics.com>
> Cc: Peng Fan <peng.fan at nxp.com>
> Cc: Stefano Babic <sbabic at denx.de>
> Cc: Vagrant Cascadian <vagrant at debian.org>
> ---
>  drivers/usb/host/ehci-mx6.c | 17 +++++++++++++++++
>  1 file changed, 17 insertions(+)
> 
> diff --git a/drivers/usb/host/ehci-mx6.c b/drivers/usb/host/ehci-mx6.c
> index 33abfeada0..109ed7ed4a 100644
> --- a/drivers/usb/host/ehci-mx6.c
> +++ b/drivers/usb/host/ehci-mx6.c
> @@ -503,6 +503,22 @@ static int ehci_usb_ofdata_to_platdata(struct udevice
> *dev)
>  	return 0;
>  }
>  
> +static int ehci_usb_bind(struct udevice *dev)
> +{
> +	static int num_controllers;
> +
> +	/*
> +	 * Without this hack, if we return ENODEV for USB Controller 0, on
> +	 * probe for the next controller, USB Controller 1 will be given a
> +	 * sequence number of 0. This conflicts with our requirement of
> +	 * sequence numbers while initialising the peripherals.
> +	 */
> +	dev->req_seq = num_controllers;
> +	num_controllers++;
> +
> +	return 0;
> +}
> +
>  static int ehci_usb_probe(struct udevice *dev)
>  {
>  	struct usb_platdata *plat = dev_get_platdata(dev);
> @@ -564,6 +580,7 @@ U_BOOT_DRIVER(usb_mx6) = {
>  	.id	= UCLASS_USB,
>  	.of_match = mx6_usb_ids,
>  	.ofdata_to_platdata = ehci_usb_ofdata_to_platdata,
> +	.bind	= ehci_usb_bind,
>  	.probe	= ehci_usb_probe,
>  	.remove = ehci_deregister,
>  	.ops	= &ehci_usb_ops,
> -- 
> 2.20.1
> 
> 

Tested-by: Ludwig Zenz <lzenz at dh-electronics.com>

Thanks,
Regards
Ludwig Zenz


More information about the U-Boot mailing list