[U-Boot] [PATCH] usb: ehci-mx5: Fix bus enumeration for DM case
Lukasz Majewski
lukma at denx.de
Mon Jun 24 12:09:39 UTC 2019
On Thu, 20 Jun 2019 22:53:58 +0200
Marek Vasut <marex at denx.de> wrote:
> It is likely that the DM conversion of EHCI iMX5 driver was a
> derivative of EHCI VF, however the conversion is incomplete and is
> missing the bind workaround, which updates dev->seq number. Without
> this, all controllers have dev->seq number 0 . Add this bind
> workaround into EHCI iMX5 driver as well.
>
> Signed-off-by: Marek Vasut <marex at denx.de>
> Cc: Abel Vesa <abel.vesa at nxp.com>
> Cc: Adam Ford <aford173 at gmail.com>
> Cc: Fabio Estevam <festevam at gmail.com>
> Cc: Ludwig Zenz <lzenz at dh-electronics.com>
> Cc: Peng Fan <peng.fan at nxp.com>
> Cc: Stefano Babic <sbabic at denx.de>
> Cc: Vagrant Cascadian <vagrant at debian.org>
> ---
> drivers/usb/host/ehci-mx5.c | 17 +++++++++++++++++
> 1 file changed, 17 insertions(+)
>
> diff --git a/drivers/usb/host/ehci-mx5.c b/drivers/usb/host/ehci-mx5.c
> index 0b32728c57..4db513f4e5 100644
> --- a/drivers/usb/host/ehci-mx5.c
> +++ b/drivers/usb/host/ehci-mx5.c
> @@ -301,6 +301,22 @@ static int ehci_usb_ofdata_to_platdata(struct
> udevice *dev) return 0;
> }
>
> +static int ehci_usb_bind(struct udevice *dev)
> +{
> + static int num_controllers;
> +
> + /*
> + * Without this hack, if we return ENODEV for USB Controller
> 0, on
> + * probe for the next controller, USB Controller 1 will be
> given a
> + * sequence number of 0. This conflicts with our requirement
> of
> + * sequence numbers while initialising the peripherals.
> + */
> + dev->req_seq = num_controllers;
> + num_controllers++;
> +
> + return 0;
> +}
> +
> static int ehci_usb_probe(struct udevice *dev)
> {
> struct usb_platdata *plat = dev_get_platdata(dev);
> @@ -362,6 +378,7 @@ U_BOOT_DRIVER(usb_mx5) = {
> .id = UCLASS_USB,
> .of_match = mx5_usb_ids,
> .ofdata_to_platdata = ehci_usb_ofdata_to_platdata,
> + .bind = ehci_usb_bind,
> .probe = ehci_usb_probe,
> .remove = ehci_deregister,
> .ops = &ehci_usb_ops,
Tested-by: Lukasz Majewski <lukma at denx.de>
Tested on HSC|DDC i.MX53 board (usb start works as previously).
master branch
SHA1: 77f6e2dd0551d8a825bab391a1bd6b838874bcd4
Best regards,
Lukasz Majewski
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: lukma at denx.de
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 488 bytes
Desc: OpenPGP digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20190624/f54a18c2/attachment.sig>
More information about the U-Boot
mailing list