[U-Boot] [PATCH v2 00/99] ram: rk3399: Add LPDDR4 support

Mark Kettenis mark.kettenis at xs4all.nl
Tue Jun 25 08:43:52 UTC 2019


> From: Jagan Teki <jagan at amarulasolutions.com>
> Date: Mon, 17 Jun 2019 13:01:13 +0530
> 
> This is the v2 set for supporting LPDDR4 with associated
> features, wrt to previous series[1].
> 
> Thanks to
> - YouMin Chen
> - Akash Gajjar
> - Kever Yang
> for supporting all the help on this work.
> 
> On summary this series support
> - Code warning and fixes
> - rank detection, this would required to probe single channel 
>   sdram configured in NanoPI-NEO4
> - LPDDR4 support, tested in Rockpro64 and Rock-PI-4
> 
> Changes for v2:
> - handle LPDDR4 code as part of CONFIG_RAM_RK3399_LPDDR4
> - support data_training and set_rate via sdram_rk3399_ops
> - add proper sys_reg_enc macros
> - add new patch to rename variable sdram_params with params
> - fix few commit messages
> 
> patch 0001 - 0034: fix code warnings, prints, new macros
> 
> patch 0035 - 0052: rank detection, sdram debug code
> 
> patch 0053: use DDR3-1800 on NanoPI-NEO4
> 
> patch 0054 - 0094: lpddr4 support
> 
> patch 0095: enable lpddr4 in Rockpro64
> 
> patch 0096: enable lpddr4 in Rock-PI-4
> 
> patch 0097: LPDDR4-100 timings
> 
> patch 0098: Use LPDDR4-100 on Rockpro64
> 
> patch 0099: Use LPDDR4-100 on Rock-PI 4
> 
> Size (increased to ~3KiB ):
> - Puma RK3399 (u-boot-spl-dtb.bin):
>   before: 115644 after: 118744
> - NanoPI M4 (u-boot-tpl-dtb.bin)
>   before: 41873 after: 44909
> 
> Travis-CI:
> https://travis-ci.org/openedev/u-boot-amarula/builds/546597944
> 
> Repo:
> https://github.com/openedev/u-boot-amarula/tree/rk3399-lpddr4
> 
> [1] https://patchwork.ozlabs.org/cover/1113893/
> 
> Any inputs?
> Jagan.
> 
> Jagan Teki (99):
>   ram: rk3399: Fix code warnings
>   ram: rk3399: Add space between string with format specifier
>   ram: rk3399: Add proper spaces in code
>   ram: rk3399: s/sdram_params/params
>   ram: rk3399: Handle data training return types
>   ram: rk3399: Order include files
>   ram: rk3399: Move macro after include files
>   ram: rk3399: Clear PI_175 interrupts in data training
>   ram: rk3399: Use rank mask in ca data training
>   ram: rk3399: Use rank mask in wdql data training
>   ram: rk3399: Add ddrtype enc macro
>   ram: rk3399: Add channel number encoder macro
>   ram: rk3399: Add row_3_4 enc macro
>   ram: rk3399: Add chipinfo macro
>   ram: rk3399: Add rank enc macro
>   ram: rk3399: Add column enc macro
>   ram: rk3399: Add bk enc macro
>   ram: rk3399: Add dbw enc macro
>   ram: rk3399: Add cs0_rw macro
>   ram: rk3399: Add cs1_rw macro
>   ram: rk3399: Add bw enc macro
>   ram: rk3399: Rename sys_reg with sys_reg2
>   ram: rk3399: Update cs0_row to use sys_reg3
>   ram: rk3399: Update cs1_row to use sys_reg3
>   ram: rk3399: Add cs1_col enc macro
>   ram: rk3399: Add ddr version enc macro
>   ram: rk3399: Add ddrtimingC0
>   ram: rk3399: Add DdrMode
>   ram: rk3399: Handle pctl_cfg return type
>   ram: rk3399: s/tsel_wr_select_n/tsel_wr_select_dq_n
>   ram: rk3399: s/tsel_wr_select_p/tsel_wr_select_dq_p
>   ram: rk3399: s/ca_tsel_wr_select_n/tsel_wr_select_ca_n
>   ram: rk3399: s/ca_tsel_wr_select_p/tsel_wr_select_ca_p
>   ram: rk3399: Order tsel variables
>   ram: rk3399: Add phy pctrl reset support
>   ram: rk3399: Move pwrup_srefresh_exit to dram_info
>   ram: rk3399: Add pctl start support
>   ram: rockchip: rk3399: Add cap_info structure
>   ram: rk3399: s/rk3399_base_params/sdram_base_params
>   ram: rk3399: Move common sdram structures in common header
>   arm: include: rockchip: Move dramtypes to common header
>   arm: include: rockchip: Add DDR4 enum
>   ram: rockchip: Add initial Kconfig
>   debug_uart: Add printdec
>   ram: rockchip: Add debug sdram driver
>   ram: rockchip: debug: Add sdram_print_ddr_info
>   ram: rockchip: debug: Get the cs capacity
>   ram: rk3399: debug: Add sdram_print_stride
>   ram: rk3399: Compute stride for 2 channels
>   ram: rk3399: Compute stride for 1 channel a
>   ram: rk3399: Add rank detection support
>   ram: rk3399: Enable sdram debug functions
>   rockchip: dts: rk3399: nanopi-neo4: Use DDR3-1866 dtsi
>   clk: rockchip: rk3399: Fix check patch warnings and checks
>   clk: rockchip: rk3399: Set 50MHz ddr clock
>   clk: rockchip: rk3399: Set 400MHz ddr clock
>   ram: rk3399: Add spaces in pctl_cfg
>   ram: rk3399: Configure phy IO in ds odt
>   ram: rockchip: Kconfig: Add RK3399 LPDDR4 entry
>   ram: rk3399: Add lpddr4 rank mask for ca training
>   ram: rk3399: Add lpddr4 rank mask for wdql training
>   ram: rk3399: Move mode_sel assignment
>   ram: rk3399: Don't wait for PLL lock in lpddr4
>   ram: rk3399: Avoid two channel ZQ Cal Start at the same time
>   ram: rk3399: Configure PHY_898, PHY_919 for lpddr4
>   ram: rk3399: Configure BOOSTP_EN, BOOSTN_EN for lpddr4
>   ram: rk3399: Configure SLEWP_EN, SLEWN_EN for lpddr4
>   ram: rk3399: Configure PHY RX_CM_INPUT for lpddr4
>   ram: rk3399: Map chipselect for lpddr4
>   ram: rk3399: Configure tsel write ca for lpddr4
>   ram: rk3399: Don't disable dfi dram clk for lpddr4, rank 1
>   ram: rk3399: Add IO settings
>   ram: sdram: Configure lpddr4 tsel rd, wr based on IO settings
>   ram: rk3399: Add tsel control clock drive
>   ram: rk3399: Configure soc odt support
>   ram: rk3399: Get lpddr4 tsel_rd_en from io settings
>   ram: rk3399: Update lpddr4 vref based on io settings
>   ram: rk3399: Update lpddr4 mode_sel based on io settings
>   ram: rk3399: Update lpddr4 vref_mode_ac
>   ram: rk3399: Simplify data training first argument
>   ram: rk3399: Handle data training via ops
>   ram: rk3399: Add LPPDR4 mr detection
>   arm: include: rockchip: Add rk3399 pmu file
>   rockchip: rk3399: syscon: Add pmu support
>   rockchip: dts: rk3399: Add u-boot,dm-pre-reloc for pmu
>   ram: rk3399: Add LPPDDR4-400 timings inc
>   ram: rk3399: Add LPPDDR4-800 timings inc
>   ram: rk3399: Add set_rate sdram rk3399 ops
>   ram: rk3399: Add lpddr4 set rate support
>   ram: rk3399: Set lpddr4 dq odt
>   ram: rk3399: Set lpddr4 ca odt
>   ram: rk3399: Set lpddr4 MR3
>   ram: rk3399: Set lpddr4 MR12
>   ram: rk3399: Set lpddr4 MR14
>   configs: rockpro64: Enable LPDDR4 support
>   configs: rock-pi-4: Enable LPDDR4 support
>   rockchip: dts: rk3399: Add LPDDR4-100 timings
>   rockchip: dts: rk3399: rockpro64: Use LPDDR4-100 dtsi
>   rockchip: dts: rk3399: rock-pi-4: Use LPDDR4-100 dtsi
> 
>  arch/arm/dts/rk3399-nanopi-neo4-u-boot.dtsi   |    1 +
>  arch/arm/dts/rk3399-rock-pi-4-u-boot.dtsi     |    1 +
>  arch/arm/dts/rk3399-rockpro64-u-boot.dtsi     |    1 +
>  arch/arm/dts/rk3399-sdram-lpddr4-100.dtsi     | 1537 +++++++++++
>  arch/arm/dts/rk3399-u-boot.dtsi               |    4 +
>  .../include/asm/arch-rockchip/pmu_rk3399.h    |   72 +
>  arch/arm/include/asm/arch-rockchip/sdram.h    |    6 -
>  .../include/asm/arch-rockchip/sdram_common.h  |   90 +
>  .../include/asm/arch-rockchip/sdram_rk322x.h  |    7 -
>  .../include/asm/arch-rockchip/sdram_rk3399.h  |   65 +-
>  arch/arm/mach-rockchip/rk3399/syscon_rk3399.c |    8 +
>  configs/rock-pi-4-rk3399_defconfig            |    1 +
>  configs/rockpro64-rk3399_defconfig            |    1 +
>  drivers/clk/rockchip/clk_rk3399.c             |   76 +-
>  drivers/ram/Kconfig                           |    1 +
>  drivers/ram/rockchip/Kconfig                  |   33 +
>  drivers/ram/rockchip/Makefile                 |    3 +-
>  .../ram/rockchip/sdram-rk3399-lpddr4-400.inc  | 1570 +++++++++++
>  .../ram/rockchip/sdram-rk3399-lpddr4-800.inc  | 1570 +++++++++++
>  drivers/ram/rockchip/sdram_debug.c            |  147 ++
>  drivers/ram/rockchip/sdram_rk3399.c           | 2289 ++++++++++++++---
>  include/debug_uart.h                          |   19 +
>  22 files changed, 7035 insertions(+), 467 deletions(-)
>  create mode 100644 arch/arm/dts/rk3399-sdram-lpddr4-100.dtsi
>  create mode 100644 arch/arm/include/asm/arch-rockchip/pmu_rk3399.h
>  create mode 100644 drivers/ram/rockchip/Kconfig
>  create mode 100644 drivers/ram/rockchip/sdram-rk3399-lpddr4-400.inc
>  create mode 100644 drivers/ram/rockchip/sdram-rk3399-lpddr4-800.inc
>  create mode 100644 drivers/ram/rockchip/sdram_debug.c
> 
> -- 
> 2.18.0.321.gffc6fa0e3

Tested on rockpro64 and firefly-rk3399.  Both boards work with this
diff provided I apply the two "boot-on" regulator diffs that I posted
a couple of days ago.  A significant improvement for rockpro64 and no
regression for firefly-rk3399.  So:

Tested-by: Mark Kettenis <kettenis at openbsd.org>


More information about the U-Boot mailing list