[U-Boot] [PATCH 4/5] ARM: socfpga: vining_fpga: Update environment
Marek Vasut
marex at denx.de
Wed Jun 26 22:19:34 UTC 2019
Update board environment to match the one used in deployment.
Signed-off-by: Marek Vasut <marex at denx.de>
Cc: Silvio Fricke <silvio.fricke at softing.com>
Cc: Simon Goldschmidt <simon.k.r.goldschmidt at gmail.com>
---
include/configs/socfpga_vining_fpga.h | 111 ++++++++++++++++++++------
1 file changed, 87 insertions(+), 24 deletions(-)
diff --git a/include/configs/socfpga_vining_fpga.h b/include/configs/socfpga_vining_fpga.h
index cdca65ae95..73a8244269 100644
--- a/include/configs/socfpga_vining_fpga.h
+++ b/include/configs/socfpga_vining_fpga.h
@@ -11,8 +11,9 @@
#define PHYS_SDRAM_1_SIZE 0x40000000 /* 1GiB on VINING_FPGA */
/* Booting Linux */
-#define CONFIG_BOOTFILE "openwrt-socfpga-socfpga_cyclone5_vining_fpga-fit-uImage.itb"
+#define CONFIG_BOOTFILE "fitImage"
#define CONFIG_BOOTCOMMAND "run selboot"
+#define CONFIG_SYS_BOOTM_LEN 0x2000000 /* 32 MiB */
#define CONFIG_LOADADDR 0x01000000
#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
@@ -30,8 +31,11 @@
* B: GPIO 78 ... the button between USB A ports
*
* The logic:
- * if button B is not pressed, boot normal Linux system immediatelly
- * if button B is pressed, wait $bootdelay and boot recovery system
+ * if button B is pressed, boot recovery system after 10 seconds
+ * if force_boottype is set, boot system depending on the value in the
+ * $force_boottype variable after 1 second
+ * if button B is not pressed and force_boottype is not set, boot normal
+ * Linux system after 5 seconds
*/
#define CONFIG_PREBOOT \
"setenv hostname vining-${unit_serial} ; " \
@@ -39,6 +43,11 @@
"if gpio input 78 ; then " \
"setenv bootdelay 10 ; " \
"setenv boottype rcvr ; " \
+ "elif test -n \"$force_boottype\" ; then " \
+ "setenv bootdelay 1 ; " \
+ "setenv boottype \"$force_boottype\" ; "\
+ "setenv force_boottype ; " \
+ "saveenv ; " \
"else " \
"setenv bootdelay 5 ; " \
"setenv boottype norm ; " \
@@ -51,21 +60,36 @@
"bootscript=boot.scr\0" \
"ubimtdnr=5\0" \
"ubimtd=rootfs\0" \
- "ubipart=ubi0:rootfs\0" \
+ "ubipart=ubi0:vining-fpga-rootfs\0" \
"ubisfcs=1\0" /* Default is flash at CS#1 */ \
"netdev=eth0\0" \
- "hostname=vining_fpga\0" \
+ "hostname=vining_fpga\0" \
"kernel_addr_r=0x10000000\0" \
- "mtdparts_0=ff705000.spi.0:" \
+ "fdt_addr_r=0x20000000\0" \
+ "fdt_high=0xffffffff\0" \
+ "initrd_high=0xffffffff\0" \
+ "dfu_alt_info=qspi0 sf 0:0;qspi1 sf 0:1\0" \
+ "mtdparts_0_16m=ff705000.spi.0:" /* 16MiB+128MiB SF config */ \
"1m(u-boot)," \
"64k(env1)," \
"64k(env2)," \
"256k(softing1)," \
"256k(softing2)," \
"-(rcvrfs)\0" /* Recovery */ \
- "mtdparts_1=ff705000.spi.1:" \
- "32m(rootfs)," \
+ "mtdparts_0_256m=ff705000.spi.0:" /* 256MiB(+256MiB) config */ \
+ "1m(u-boot)," \
+ "64k(env1)," \
+ "64k(env2)," \
+ "256k(softing1)," \
+ "256k(softing2)," \
+ "14720k(rcvrfs)," /* Recovery */ \
+ "64m(rootfs)," /* Root */ \
+ "-(userfs)\0" /* User */ \
+ "mtdparts_1_128m=ff705000.spi.1:" /* 16MiB+128MiB SF config */ \
+ "64m(rootfs)," \
"-(userfs)\0" \
+ "mtdparts_1_256m=ff705000.spi.1:" /* 256MiB+256MiB SF config */ \
+ "-(userfs2)\0" \
"update_filename=u-boot-with-spl-dtb.sfp\0" \
"update_qspi_offset=0x0\0" \
"update_qspi=" /* Update the QSPI firmware */ \
@@ -74,6 +98,23 @@
"sf update ${loadaddr} ${update_qspi_offset} ${filesize} ; " \
"fi ; " \
"fi\0" \
+ "sf_identify=" \
+ "setenv sf_size_0 ; setenv sf_size_1 ; " \
+ "sf probe 0:0 && setenv sf_size_0 ${sf_size} ; " \
+ "sf probe 0:1 && setenv sf_size_1 ${sf_size} ; " \
+ "if test -z \"${sf_size_1}\" ; then " \
+ /* 1x256MiB SF */ \
+ "setenv mtdparts_0 ${mtdparts_0_256m} ; " \
+ "setenv mtdparts_1 ; " \
+ "elif test \"${sf_size_0}\" = \"1000000\" ; then " \
+ /* 16MiB+128MiB SF */ \
+ "setenv mtdparts_0 ${mtdparts_0_16m} ; " \
+ "setenv mtdparts_1 ${mtdparts_1_128m} ; " \
+ "else " \
+ /* 256MiB+256MiB SF */ \
+ "setenv mtdparts_0 ${mtdparts_0_256m} ; " \
+ "setenv mtdparts_1 ${mtdparts_1_256m} ; " \
+ "fi\0" \
"fpga_filename=output_file.rbf\0" \
"load_fpga=" /* Load FPGA bitstream */ \
"if tftp ${fpga_filename} ; then " \
@@ -90,7 +131,11 @@
"addmisc=" \
"setenv bootargs ${bootargs} ${miscargs}\0" \
"addmtd=" \
- "setenv mtdparts \"${mtdparts_0};${mtdparts_1}\" ; " \
+ "if test -z \"${sf_size_1}\" ; then " \
+ "setenv mtdparts \"${mtdparts_0}\" ; " \
+ "else " \
+ "setenv mtdparts \"${mtdparts_0};${mtdparts_1}\" ; " \
+ "fi ; " \
"setenv bootargs ${bootargs} mtdparts=${mtdparts}\0" \
"addargs=run addcons addmtd addmisc\0" \
"ubiload=" \
@@ -112,29 +157,47 @@
"setenv ubimtdnr 5 ; " \
"setenv mtdparts mtdparts=${mtdparts_0} ; " \
"setenv mtdids nor0=ff705000.spi.0 ; " \
- "setenv ubipart ubi0:rootfs ; " \
+ "setenv ubipart ubi0:vining-fpga-rootfs ; " \
"else " \
- "setenv ubisfcs 1 ; " \
- "setenv ubimtd rootfs ; " \
- "setenv ubimtdnr 6 ; " \
- "setenv mtdparts mtdparts=${mtdparts_1} ; " \
- "setenv mtdids nor0=ff705000.spi.1 ; " \
- "setenv ubipart ubi0:rootfs ; " \
+ "if test \"${sf_size_0}\" = \"1000000\" ; then "\
+ /* 16MiB+128MiB SF */ \
+ "setenv ubisfcs 1 ; " \
+ "setenv ubimtd rootfs ; " \
+ "setenv ubimtdnr 6 ; " \
+ "setenv mtdparts mtdparts=${mtdparts_1} ; " \
+ "setenv mtdids nor0=ff705000.spi.1 ; " \
+ "setenv ubipart ubi0:vining-fpga-rootfs ; " \
+ "else " \
+ /* 256MiB(+256MiB) SF */ \
+ "setenv ubisfcs 0 ; " \
+ "setenv ubimtd rootfs ; " \
+ "setenv ubimtdnr 6 ; " \
+ "setenv mtdparts mtdparts=${mtdparts_0} ; " \
+ "setenv mtdids nor0=ff705000.spi.0 ; " \
+ "setenv ubipart ubi0:vining-fpga-rootfs ; " \
+ "fi ; " \
"fi ; " \
"sf probe 0:${ubisfcs}\0" \
+ "boot_kernel=" \
+ "if test -z \"${sf_size_1}\" ; then " /* 1x256MiB SF */ \
+ "imxtract ${kernel_addr_r} fdt at 1 ${fdt_addr_r} && " \
+ "fdt addr ${fdt_addr_r} && " \
+ "fdt resize && " \
+ "fdt set /soc/spi at ff705000/n25q00 at 1 status disabled && " \
+ "bootm ${kernel_addr_r}:kernel at 1 - ${fdt_addr_r} ; " \
+ "else " \
+ "bootm ${kernel_addr_r} ; " \
+ "fi\0" \
"ubi_ubi=" \
- "run ubi_sfsel ubiload ubiargs addargs ; " \
- "bootm ${kernel_addr_r}\0" \
+ "run ubi_sfsel ubiload ubiargs addargs boot_kernel\0" \
"ubi_nfs=" \
- "run ubiload nfsargs addip addargs ; " \
- "bootm ${kernel_addr_r}\0" \
+ "run ubiload nfsargs addip addargs boot_kernel\0" \
"net_ubi=" \
- "run netload ubiargs addargs ; " \
- "bootm ${kernel_addr_r}\0" \
+ "run netload ubiargs addargs boot_kernel\0" \
"net_nfs=" \
- "run netload nfsargs addip addargs ; " \
- "bootm ${kernel_addr_r}\0" \
+ "run netload nfsargs addip addargs boot_kernel\0" \
"selboot=" /* Select from where to boot. */ \
+ "run sf_identify ; " \
"if test \"${bootmode}\" = \"qspi\" ; then " \
"led all off ; " \
"if test \"${boottype}\" = \"rcvr\" ; then " \
--
2.20.1
More information about the U-Boot
mailing list