[U-Boot] [PATCH v3 05/18] usb: dwc3: switch to peripheral mode when exiting

[Jean-Jacques Hiblot]

This allow the phy to enter idle and then suspend.
the K2 platforms require the PHY to be suspended before the USB domain
clock can be turned off.

Signed-off-by: Jean-Jacques Hiblot <jjhiblot at ti.com>
---

Changes in v3: None
Changes in v2: None

 drivers/usb/dwc3/core.c | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index 56e2a046bf..ae01490306 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -581,6 +581,12 @@ static int dwc3_core_init_mode(struct dwc3 *dwc)
 	return 0;
 }
 
+static void dwc3_gadget_run(struct dwc3 *dwc)
+{
+	dwc3_writel(dwc->regs, DWC3_DCTL, DWC3_DCTL_RUN_STOP);
+	mdelay(100);
+}
+
 static void dwc3_core_exit_mode(struct dwc3 *dwc)
 {
 	switch (dwc->dr_mode) {
@@ -598,6 +604,13 @@ static void dwc3_core_exit_mode(struct dwc3 *dwc)
 		/* do nothing */
 		break;
 	}
+
+	/*
+	 * switch back to peripheral mode
+	 * This enables the phy to enter idle and then, if enabled, suspend.
+	 */
+	dwc3_set_mode(dwc, DWC3_GCTL_PRTCAP_DEVICE);
+	dwc3_gadget_run(dwc);
 }
 
 #define DWC3_ALIGN_MASK		(16 - 1)
-- 
2.17.1